Panasonic Bluray Disc Home Theater Sound System Sc Btt405 Owners Manual

31
Advanced operations
VQT5F60
¾Screen Saver Function
This is to prevent image retention on the 
screen.
≥ When this is set to “On”:
If a list of playback content is displayed and 
there is no operation for 10 minutes or more, 
the screen switches to HOME menu 
automatically.
≥ While playing and pausing, etc., this function 
is not available.
¾Status Messages
Choose whether to show status messages 
automatically.
¾ HDMI CEC
Set to use “HDMI CEC” function when 
connected via HDMI cable to a device that...

32VQT5F60
∫Quick Start
Speed of start up from standby mode is 
increased.
≥ When set to “On”, the internal control unit will be 
powered and the idle power consumption will 
increase so compared to when set to “Off”.
∫ Firmware Update ( >14)
Press [OK] to show the following settings:
¾ Automatic Update Check
When this equipment remains connected to the 
Internet, it will check for the latest firmware 
version when it is turned on and you can update 
it if necessary.
¾ Update Now
You can update the...

33
Advanced operations
VQT5F60
Speaker installation option
Consult a qualified building contractor when 
attaching the speakers to a wall. Improper 
attachment may result in damage to the wall and 
speakers and personal injury.
You can attach all of the speakers (except 
subwoofer) to a wall.
≥The wall or pillar on which the speakers are to 
be attached should be capable of supporting 
10 k g (22 lbs) per screw.
1Drive a screw (not supplied) into the wall.
AAt least 30 mm 
(1 
3/16q)
B ‰ 4.0 mm (5/32q)
C...

34VQT5F60
Secure the speaker.
Using the tie down area on the rear of the speaker 
and a cord (not supplied), secure the speaker to a 
wall anchor (not supplied) permanently attached 
to the wall.
1Thread a cord to the speaker.
≥ Use a cord of less than  ‰ 2.0 mm (
3/32q), 
which is capable of supporting over 10 k g 
(22 lbs).
e.g.,  [BTT466]  [BTT465]  Front speaker
A Cord (not supplied)
2Thread a cord from the wall to the speaker 
and tie tightly.
BWall anchor (not supplied)
C Wall or pillar
D...

35
Advanced operations
Reference
VQT5F60
ReferenceTroubleshooting guide
Before requesting service, please perform the 
following steps.
∫Unit does not respond to remote 
control or unit’s buttons.
Disconnect AC power supply cord, wait 1 minute, 
then reconnect AC power supply cord.
The following do not indicate a problem with 
this unit:
– Regular disc rotating sounds.
– Image disturbance during search.
– Image disturbance when replacing 3D discs.
∫Cannot eject disc.
1 Turn the unit on.
2 Press and hold...

36VQT5F60
The TV screen turns black.
¾When “24p Output” is set to “On”, HDMI 
authentication takes place and a black screen 
is displayed.
This unit does not recognize the USB 
connection correctly.
¾Disconnect and re-connect the USB cable. If 
it still does not recognize the connection, turn 
this unit off and on again.
¾ USB devices may not be recognized by this 
unit when connected using the following :
ja USB hub
j a USB extension cable other than the 
supplied with the Wireless LAN Adaptor 
DY-WL5...

37
Reference
VQT5F60
Video is not output in high-definition.
¾Confirm that “HDMI Resolution” in the Setup 
menu is set properly. ( >27)
3D video is not output.
¾ Connect to a full high-definition TV.
¾ Are the settings on this unit and the TV 
correct? ( >19)
¾ Depending on the connected TV, the video 
being played back might switch to 2D video 
due to changes in resolution etc. Check the 
3D setting on the TV.
¾ Check that proper HDMI video input is 
selected on the TV.
3D video is not output correctly...

38VQT5F60
Disc cannot be played.
¾The disc is dirty. ( >6)
¾ The disc is not finalized. ( >8)
¾ Confirm the “Mixed Data Disc Option” is set 
properly. ( >31)
Still pictures (JPEG) do not play back 
normally.
¾ The images that were edited on the PC, such 
as Progressive JPEG, etc., may not be played 
back.
I can’t play back BD-Live.
¾Confirm that this unit is connected to the 
broadband Internet. ( >12)
¾ Confirm the “BD-Live Internet Access” 
settings. ( >30)
¾ Confirm a USB device is connected to the...

39
Reference
VQT5F60
Distorted sound or noise is heard.
¾Adjust the position of the antenna.
A beat sound is heard.
¾Try to keep a certain amount of distance 
between the antenna and the TV.
Stations cannot be selected.
¾Press and hold [SELECTOR].
After a few seconds the display changes to show 
the current lowest frequency (87.9 MHz). Continue 
to hold the button down. The lowest frequency 
changes (87.5 MHz) and the step is changed.
Noise is excessive.
¾Change the audio to be output as monaural.
Press...

40VQT5F60
Cannot play.
¾You inserted an incompatible disc (Discs 
recorded in PAL video, etc.).
Cannot display on this unit.
¾You tried to play a non-compatible image.
¾ Re-insert the media.
No disc inserted.
¾The disc may be upside down.
$ This operation is not available.
¾ Some operations are unsupported by the unit.
(For example, reverse slow motion, etc.)
IP address is not set.
¾The “IP Address” in “IP Address/DNS 
Settings” is “---. ---. ---. ---”. Set the “IP 
Address”, “Subnet Mask”, and “Default...