Panasonic Bluray Disc Home Theater Sound System Sc Bt230 Operating Instructions

							until 
2010/07/19
Operating Instructions
Blu-ray Disc Home Theater Sound System
Model No. SC-BT730
SC-BT330
SC-BT230
SC-BT235
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future 
reference.
 For Canada only: The word “Participant” is used in place of the word 
“Partner”.
As an ENERGY STAR Partner,
Panasonic has determined that
this product meets the ENERGY STAR
guidelines for energy efficiency.®
®[For]the]U.S.A.]and]Canada]If you have any questions contact
[For]the]U.S.A.]and]Puerto]Rico]: 1-800-211-PANA(7262)
[For]Canada]: 1-800-561-5505
[Only]for[U.S.A.]and]Puerto]Rico]: 
The warranty can be found on page 50.
Please return the product registration 
card (if included), or register via the 
Internet at:
www.panasonic.com/register
[For]Canada]:  The warranty can be found on page 51.
The illustration shows the image of the unit SC-BT730.
PPXPCVQT2M13-6
SC-BT230_330_730P_PC_VQT2M13_eng.book  5 ページ  ２０１０年３月１６日　火曜日　午後５時５７分 
						

							2
VQT2M13
Getting started
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE 
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN 
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. 
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC 
SHOCK OR PRODUCT DAMAGE,
≥DO NOT EXPOSE THIS APPARATUS TO RAIN, 
MOISTURE, DRIPPING OR SPLASHING AND 
THAT NO OBJECTS FILLED WITH LIQUIDS, 
SUCH AS VASES, SHALL BE PLACED ON THE 
APPARATUS.
≥USE ONLY THE RECOMMENDED 
ACCESSORIES.
≥DO NOT REMOVE THE COVER (OR BACK); 
THERE ARE NO USER SERVICEABLE PARTS 
INSIDE. REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause 
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
≥Reorient or relocate the receiving antenna.
≥Increase the separation between the equipment and receiver.
≥Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.
≥Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:To assure continued compliance, follow the attached 
installation instructions and use only shielded interface cables when 
connecting to peripheral devices. Any changes or modifications not 
expressly approved by the party responsible for compliance could void 
the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including 
interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
[BT730] THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause 
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
≥Reorient or relocate the receiving antenna.
≥Increase the separation between the equipment and receiver.
≥Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.
≥Consult the dealer or an experienced radio/TV technician for help.
FCC caution: To maintain compliance with FCC regulations, shielded 
interface cables must be used with this equipment. Operation with 
non-approved equipment or unshielded cables may result in interference 
to radio and TV reception. Any changes or modifications not approved by 
the party responsible for compliance could void the user’s authority to 
operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including 
interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
WARNING:To satisfy FCC RF exposure requirements for mobile transmitting 
devices, a separation distance of 20 cm or more should be maintained 
between the antenna of this device and persons during device operation.
To ensure compliance, operations at closer than this distance is not
recommended. The antenna used for this transmitter must not be 
co-located in conjunction with any other antenna or transmitter.
[BT730]
THE FOLLOWING APPLIES ONLY IN CANADA.
This device complies with RSS-210 of the IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received, 
including interference that may cause undesired operation 
of the device.
[BT730]
THE FOLLOWING APPLIES ONLY IN CANADA.
This Class B digital apparatus complies with Canadian 
ICES-003.
[BT730]
For wireless system
Product Identification Marking is located on the bottom of 
wireless system.
SC-BT230_330_730P_PC_VQT2M13_eng.book  2 ページ  ２０１０年３月１６日　火曜日　午後５時５７分 
						

							3
VQT2M13
IMPORTANT SAFETY 
INSTRUCTIONS
Read these operating instructions carefully before using the 
unit. Follow the safety instructions on the unit and the 
applicable safety instructions listed below. Keep these 
operating instructions handy for future reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in 
accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, 
heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat.
9(For the U.S.A. and Canada)
Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two blades with 
one wider than the other. 
A grounding-type plug has two blades and a third 
grounding prong. The wide blade or the third prong are 
provided for your safety. If the provided plug does not fit 
into your outlet, consult an electrician for replacement of 
the obsolete outlet.
10 Protect the power cord from being walked on or pinched 
particularly at plugs, convenience receptacles, and the 
point where they exit from the apparatus.
11 Only use attachments/accessories specified by the 
manufacturer.
12 Use only with the cart, stand, tripod, bracket, 
or table specified by the manufacturer, or sold 
with the apparatus. When a cart is used, use 
caution when moving the cart/apparatus 
combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or when 
unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing 
is required when the apparatus has been damaged in any 
way, such as power-supply cord or plug is damaged, liquid 
has been spilled or objects have fallen into the apparatus, 
the apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped.
THE FOLLOWING APPLIES ONLY TO THE U.S.A. AND CANADA.
(Inside of product)
CAUTION!
≥DO NOT INSTALL OR PLACE THIS UNIT IN A 
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER 
CONFINED SPACE. ENSURE THE UNIT IS WELL 
VENTILATED. TO PREVENT RISK OF ELECTRIC 
SHOCK OR FIRE HAZARD DUE TO OVERHEATING, 
ENSURE THAT CURTAINS AND ANY OTHER 
MATERIALS DO NOT OBSTRUCT THE VENTILATION 
VENTS.
≥DO NOT OBSTRUCT THE UNIT’S VENTILATION 
OPENINGS WITH NEWSPAPERS, TABLECLOTHS, 
CURTAINS, AND SIMILAR ITEMS.
≥DO NOT PLACE SOURCES OF NAKED FLAMES, 
SUCH AS LIGHTED CANDLES, ON THE UNIT.
≥DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY 
FRIENDLY MANNER.
(For units with PX printed on the packaging)
THIS UNIT IS INTENDED FOR USE IN MODERATE 
CLIMATES.
(For units with PX printed on the packaging)
CAUTION:
The AC voltage is different according to the area. Be sure 
to set the proper voltage in your area before use.
(For details, please refer to page >18.)
(For units with PX printed on the packaging)
This product may receive radio interference caused by 
mobile telephones during use. If such interference is 
apparent, please increase separation between the product 
and the mobile telephone.
The lightning flash with arrowhead symbol, within 
an equilateral triangle, is intended to alert the user 
to the presence of uninsulated “dangerous 
voltage” within the product’s enclosure that may be 
of sufficient magnitude to constitute a risk of 
electric shock to persons.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle 
is intended to alert the user to the presence of 
important operating and maintenance (servicing) 
instructions in the literature accompanying the 
appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The laser product 
label has not been 
attached to 
products for the 
U.S.A. and 
Canada.
SC-BT230_330_730P_PC_VQT2M13_eng.book  3 ページ  ２０１０年３月１６日　火曜日　午後５時５７分 
						

							4
VQT2M13
Table of contents
IMPORTANT SAFETY INSTRUCTIONS ..........  3
Getting started
Accessory..........................................................  5
Control reference guide.....................................  6
•Remote control .................................................................  6
•Main unit (Front) ...............................................................  7
•Main unit (Rear)................................................................  7
Playable discs/Cards.........................................  8
Unit and media care ..........................................  9
Using the remote control ...................................  9
Inserting or removing a media.........................  22
START menu ..................................................  23
Enjoying sound effects from all speakers........  24
•Enjoying surround sound effects ....................................  24
Playback
Playing video contents ....................................  25
•Other operations during play ..........................................  25
•Useful functions ..............................................................  26
•Enjoying BD-Live or BONUSVIEW in BD-Video ............  26
Playing still pictures.........................................  27
•Useful functions ..............................................................  28
Playing music ..................................................  28
Radio
Listening to the Radio .....................................  29
•Presetting stations automatically ....................................  29
•Presetting stations manually ..........................................  29
•Listening/confirming the preset channels .......................  29
TV
Enjoying TV with unit’s speakers .....................  30
•Surround sound effects..................................................  30
•Sound modes.................................................................  30
•Making settings for digital audio input............................  30
Linked operations with the TV
(VIERA LinkTM “HDAVI ControlTM”)...................  31
•Setting the audio link .....................................................  31
•Easy control only with VIERA remote control ................  32
Other devices
Using the iPod/iPhone .....................................  32
•iPod/iPhone Connection ................................................  32
•iPod/iPhone Playback ....................................................  33
Advanced operations
Enjoying VIERA CASTTM.................................  34
Playback menu ................................................  34
Setup menu .....................................................  36
•Speaker settings ............................................................. 39
Optional speaker settings
Speaker installation option ..............................  40
Reference
Troubleshooting guide .....................................  41
Messages ........................................................  43
About MP3/JPEG/AVCHD/MPEG2 files ..........  44
Supplemental information ................................  45
Glossary ..........................................................  47
Specifications ..................................................  48
Limited Warranty 
(ONLY FOR U.S.A. AND PUERTO RICO) ......  50
Limited Warranty (Only for CANADA) .............  51
Index ..................................................  Back cover
STEP 1 : Preparing the speakers....................  10
•Assembling the speakers ...............................................  10
•Speaker assembly option ...............................................  11
STEP 2 : Positioning .......................................  12
STEP 3: Connections ......................................  13
•Speaker cable connection ..............................................  13
•Connection to a TV ........................................................  14
•Radio antenna connection .............................................  16
•[BT730] Digital transmitter connection .............................  16
•Connection to a broadband network ..............................  17
STEP 4: AC power supply cord connection ....  18
STEP 5: 
[BT730] 
Preparing the wireless system ........................  18
STEP 6: Smart setup / Easy setup..................  19
•Network Easy Setting .....................................................  20
•Firmware updates...........................................................  21
STEP 7: 
Reprogramming the remote control ................  22
SC-BT230_330_730P_PC_VQT2M13_eng.book  4 ページ  ２０１０年３月１６日　火曜日　午後５時５７分 
						

							Getting started  TV Radio Playback Other devices
Advanced operations
ReferenceOptional speaker 
settings
5
VQT2M13
Getting startedIndicates features applicable to:
[BT730]: SC-BT730 only
[BT330]: SC-BT330 only
[BT230]: SC-BT230 only
[BT235]: SC-BT235 only
≥Some models may not be on sale in certain regions.
≥Some accessories and external devices mentioned in these operating instructions that are not included with this 
product may not be on sale in certain regions.
Accessory
Check the supplied accessories before using this unit.
(ONLY FOR CANADA)
The enclosed Canadian French label sheet corresponds to the 
English display on the front and back side of the unit.	≥Product numbers correct as of December 2009. These may be subject to change.≥Do not use AC power supply cord with other equipment.
≥Only for U.S.A. and Puerto Rico: To order accessories, refer to “Accessory 
Purchases (United States and Puerto Rico)” on page 50. 
For other areas: To order accessories, call the dealer from whom you have 
made your purchase.
≥These operating instructions are applicable to models 
SC-BT730, SC-BT330, SC-BT230 and SC-BT235. 
Unless otherwise indicated, illustrations in these 
operating instructions are of SC-BT730 for the U.S.A. 
and Canada.
≥
Operations in these instructions are described mainly 
with the remote control, but you can perform the 
operations on the main unit if the controls are the same.
SystemSC-BT730SC-BT330SC-BT230SC-BT235
Main unitSA-BT730 SA-BT330 SA-BT230 SA-BT235
Speaker system Front speakersSB-HF730 SB-HF330 SB-HF230 SB-HF330
Center speakerSB-HC730 SB-HC230 SB-HC230 SB-HC230
Surround speakersSB-HS230 SB-HS230 SB-HS230 SB-HS230
SubwooferSB-HW330 SB-HW330 SB-HW480 SB-HW480
Wireless system (with a digital transmitter)SH-FX71———
∏1 Remote control
(N2QAKB000089)∏2 Batteries for 
remote control∏1 Video cable
(K2KA2BA00001)∏1 FM indoor 
antenna
(RSAX0002)∏1 Sheet of speaker 
cable stickers
∏Speaker cables
(center)   [REEX1154], with green connector
(surround)  [REEX1155, ([BT730]: REEX1155B)], with gray connector 
[REEX1156, ([BT730]: REEX1156B)], with blue connector 
[BT230]
(front)   [REEX1152A], with red connector
[REEX1153A], with white connector[BT730] [BT330]
∏1 Auto speaker 
setup microphone
(L0CBAY000034)
∏AC power supply cord
For the U.S.A. and Canada For units with PX printed on the packaging
[BT730]
2 (K2CB2CB00021)
[BT330] [BT235] [BT230]
1 (K2CB2CB00021)[BT730]
2 (K2CQ2CA00007)
[BT230]
1 (K2CQ2CA00007)
[BT730]
∏2
Speaker stands
(with cable)
[RYK1609-K] 
with white connector
[RYK1609A-K]
with red connector∏2 Bases 
(RYK1610-K)∏4 Screws
(XTN5+10FFJK)
∏2 Screws
(XYN5+J18FJK)For units with PX printed on the packaging
∏AC plug adaptor
2 (K2DAYYY00002) [BT730]
1 (K2DAYYY00002) [BT230]
[BT330] [BT235]
∏2 Speaker stands
(with cable)
[RYPX1041-KL]
with white connector
[RYPX1041-KR] 
with red connector∏2 Bases 
(RYPX0389-K)∏8 Screws
(XTN5+10FFJK)
SC-BT230_330_730P_PC_VQT2M13_eng.book  5 ページ  ２０１０年３月１６日　火曜日　午後５時５７分 
						

							6
VQT2M13
Control reference guide
1 Turn the unit on and off (>19)
2 Display the Home screen of VIERA CAST (>34)
3 Select title numbers, etc./Enter numbers or characters 
(>34)
[CANCEL]: Cancel
4 Basic playback control buttons (>25)
5 Select preset radio stations
6 Show status messages (>25)
7 Show Top Menu/Direct Navigator (>25)
8[3,4,2,1]: Menu selection
[OK]: Selection
[2,1]: Select preset radio station (>29)
[2] (2;), [1] (;1): Frame-by-frame (>25)
9 Show sub menu (>26)
10 These buttons are used when;
≥Operating a BD-Video disc that includes Java
TM 
applications (BD-J). 
≥Displaying “Title View” and “Album View” screens. 
(>27)
≥Operating contents of VIERA CAST (>34)
11 Set the sound mode (>24)/Select speaker channel 
(>24)
12 Select surround sound effects (>24)
13 TV operation buttons
[Í]: Turn the television on and off
[INPUT]: Input select
[ijVOL]: Adjust the volume
14 Adjust the volume of the main unit
15 Mute the sound 
≥“MUTE” flashes on the unit’s display, while the function is 
on.
≥To cancel, press the button again or adjust the volume.
≥Muting is canceled if the unit is turned off.
16 Select the source
[BD/SD]: Select disc drive or SD card drive (>23)
[iPod]: Select iPod/iPhone as the source (>23, 33)
[RADIO/EXT-IN]: Select FM tuner or external audio as the 
source (>23, 29, 30)
17 Select radio stations manually (>29)
18 Exit the menu screen
19 Show START menu (>23)
20 Show Pop-up menu (>25)
21 Return to previous screen
22 Select audio (>25)
23 Show Playback menu (>34)/Set the sleep timer
CANCEL
RETURN
VOL
STOP
123
456
78
0
9
SEARCH
SKIPSLOWSKIP
PLAY
PAUSE
SEARCH
OK
BD/SDiPodEXT-IN
MUTE
RADIO
POP-UP MENU TOP MENU
EXITSTATUS
RGBY
-SLEEP-CH SELECT
SOUNDSURROUNDDISPLAYAUDIO
DIRECT NAVIGATORSTART
ABCDEF
JKL
MNO
TUV GHIQRSPXYZ W
@.
_,
SUB MENU  
s
VOL
TV
INPUT
18
8
20
21
23
13
19 1
417
2
22
14
16
15
3
5
6
7
9
10
11
12
Remote control
1Press and hold [–SLEEP].
2While “SLEEP ££” is displayed, press [–SLEEP] 
several times to select the time (in minutes).
≥Timer selection is up to 120 minutes.
≥Select “OFF” when cancelling the setting.
≥To confirm the remaining time
Press and hold the button again.
SC-BT230_330_730P_PC_VQT2M13_eng.book  6 ページ  ２０１０年３月１６日　火曜日　午後５時５７分 
						

							Getting started 
7
VQT2M13
1Standby/on switch (POWERÍ/I) (>19)
Press to switch the unit from on to standby mode or vice 
versa. In standby mode, the unit is still consuming a small 
amount of power.
2Power indicator
The indicator lights when this unit is turned on.
3 Connect iPod/iPhone (>32)
4 Adjust the volume of the main unit
5 Open or close the disc tray (>22)
6 Disc tray
7 SD card slot (>22)
8[BT730] [BT330] Connect Auto speaker setup microphone9 Display (FL display)
≥“SRD” (SURROUND) lights when sound is output to the 
surround speakers.
(For the U.S.A. and Canada)
≥The display is turned off when the volume is adjusted to 
“0”. (>37)
10 Remote control signal sensor
Distance: Within approx. 7 m (23 ft.)
Angle: Approx. 20
oup and down, 30oleft and right
11 Select the source (>23) 
12 Stop (>25)
13 Start play (>25)
∫If the front cover comes off
1Hold rear side of main unit by one hand and match up left 
or right side protruding hook on the cover first with the 
corresponding slot on the unit.
2Push the hook firmly towards the unit until it clicks into 
place. Then push the succeeding hooks one by one until 
all have clicked into place.
3Check that the cover now moves correctly.
≥If it does not, remove it and repeat the above procedure.
1 AC IN terminal (>18)
* (For units with PX printed on the packaging)
The terminal is not polarized.
2 Speaker terminals (>13)
3 Cooling fan
4[BT730] [BT330] [BT230] USB port for optional wireless 
adaptor (>17)
5 HDMI AV OUT terminal (>15)
6 FM radio antenna terminal (>16)7 DIGITAL AUDIO IN terminals (>14 , 15)
Terminal 1 is designated for connection with the TV.
Terminal 2 can be used with equipment other than the STB.8[BT730] [BT330] [BT230] Digital transmitter dock 
9LAN port (>17)
10 VIDEO OUT terminal (>14)
11 AUX terminal (>14)
(For units with PX printed on the packaging)
12 AC Voltage selector (>18)
Main unit (Front)
OPEN/CLOSE VOLUMEPOWERiPod
SELECTORSD CARDSETUP MIC
12
345
6 7 8 9 10 11 12 13
Pull open. e.g., [BT730]
Main unit (Rear)
A
52
1FRONTCENTERRL-LANAV
OUTVIDEO
OUTAUXLANWIRELESSR
						

							8
VQT2M13
Playable discs/Cards
∫Discs that cannot be played in this unit
Any other disc that is not specifically supported or 
previously described.
≥2.6 GB and 5.2 GB DVD-RAM
≥DVD-RAM that cannot be removed from cartridge
≥Super Audio CD
≥Photo CD
≥DVD-Audio
≥Video CD and Super Video CD
≥WMA discs
≥DivX discs
≥PAL discs
≥HD DVD
≥BD-Video discs recorded at a rate of 50 fields/sec
∫Region management information
BD-Video 
This unit plays BD-Video marked with labels containing the 
region code A.
Example:
DVD-Video
This unit plays DVD-Video marked with labels containing the 
region number “1” or “ALL”.
Example:
TypeLogo examplesType detailPlayable contents
[BD] BD-VideoVideo
BD-REVideo
JPEG
BD-RVideo
[DVD]DVD-VideoVideo
DVD-RAMVideo
AVCHD
JPEG
DVD-R
Video
AVCHD
MP3 
JPEG
DVD-R DL
DVD-RW
Video
AVCHD
—+R/+RW/+R DL
[CD]Music CDMusic [CD-DA]
—CD-R
CD-RWMusic [CD-DA]
MP3
JPEG
[SD]SD Memory Card (8 MB to 2 GB)
(Includes miniSD Card and microSD Card)
SDHC Memory Card (4 GB to 32 GB)
(Includes microSDHC Card)
SDXC Memory Card (48 GB, 64 GB)
(Includes microSDXC Card)
(as of December 2009)MPEG2
AVCHD
JPEG
2
4 1ALL1
SC-BT230_330_730P_PC_VQT2M13_eng.book  8 ページ  ２０１０年３月１６日　火曜日　午後５時５７分 
						

							Getting started 
9
VQT2M13
∫Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by 
a recorder, etc. needs to be finalized by the recorder to play on 
this unit. Please refer to the recorder’s instructions.
∫BD-Video
This unit supports high bit rate audio (Dolby Digital Plus, Dolby 
TrueHD, DTS-HD High Resolution Audio and DTS-HD Master 
Audio) adopted in BD-Video. In order to enjoy these audio 
formats, refer to page 36.
∫Music CD
≥Operation and sound quality of CDs that do not conform to 
CD-DA specifications (copy control CDs, etc.) cannot be 
guaranteed.
≥The digital audio content side of a DualDisc does not meet 
the technical specifications of the Compact Disc Digital 
Audio (CD-DA) format so playback may not be possible.
∫SD card
≥MiniSD Cards, microSD Cards, microSDHC 
Cards and microSDXC Cards can be used, but 
must be used with an adaptor card. These are 
usually supplied with such cards, or otherwise 
customer provided.
≥Keep the Memory Card out of reach of children 
to prevent swallowing.
≥To protect the card’s contents, move the record prevention 
tab (on the SD card) to “LOCK”.
≥This unit is compatible with SD Memory Cards that meet SD 
Card Specifications FAT12 and FAT16 formats, as well as 
SDHC Memory Cards in FAT32 format (Does not support 
long file name.) and SDXC Memory Cards in exFAT.
≥If the SD card is used with incompatible computers or 
devices, recorded contents may be erased due to the card 
being formatted etc.
≥Useable memory may be slightly less than the card capacity.
	≥It may not be possible to play the above media in some cases due to the 
type of media, the condition of the recording, the recording method and 
how the files were created.
≥The producers of the disc can control how discs are played. So you may 
not always be able to control play as described in these operating 
instructions. Read the disc’s instructions carefully.
Unit and media care
∫Clean this unit with a soft, dry cloth.
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, carefully read the 
instructions that came with the cloth.
∫Clean the lens with the lens cleaner disc.
∫Clean discs
Wipe with a damp cloth and then wipe dry.
∫Disc and card handling precautions
≥Handle discs by the edges to avoid inadvertent scratches or 
fingerprints on the disc.
≥Do not attach labels or stickers to discs.
≥Do not use record cleaning sprays, benzine, thinner, static 
electricity prevention liquids or any other solvent.
≥Clean any dust, water, or foreign matter from the terminals 
on the rear side of the card.
≥Do not use the following discs:
jDiscs with exposed adhesive from removed stickers or 
labels (rented discs etc).
jDiscs that are badly warped or cracked.
jIrregularly shaped discs, such as heart shapes.
∫To dispose or transfer this unit
The unit may keep the user settings information in the unit. If 
you discard this unit either by disposal or transfer, then follow 
the procedure to return all the settings to the factory presets to 
delete the user settings. (>41, “To return all settings to the 
factory preset”)≥The operation history may be recorded in the memory of this 
unit.
Using the remote 
control
Insert so the poles (+ and –) match those in the remote control.
Point it at the remote control signal sensor on this unit (>7).
	Mishandling of batteries can cause electrolyte leakage which can damage 
items the fluid contacts and may cause a fire.
≥Do not mix old and new batteries or different types at the same time.
≥Do not heat or expose to flame.
≥Do not leave the battery(ies) in an automobile exposed to direct sunlight for 
a long period of time with doors and windows closed.
≥Do not take apart or short circuit.
≥Do not attempt to recharge alkaline or manganese batteries.
≥Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a long 
period of time. Store in a cool, dark place.
Lens cleaner disc: RP-CL720PP (not included)
≥This lens cleaner may not be for sale depending on the 
region.
≥This lens cleaner is sold as specific for DIGA, but can be 
used on this unit as well.
DO DO NOT
CAUTIONDanger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the 
manufacturer. Dispose of used batteries according to the manufacturer’s 
instructions.
R6/LR6, AA(Alkaline or manganese 
batteries)
SC-BT230_330_730P_PC_VQT2M13_eng.book  9 ページ  ２０１０年３月１６日　火曜日　午後５時５７分 
						

							10
VQT2M13
STEP 1 : Preparing the speakers
[BT730] [BT330] [BT235]
Caution
≥Do not stand on the base. Be cautious when children are 
near.
≥When carrying speakers, hold the stand and base parts.
Preparation
≥To prevent damage or scratches, lay down a soft cloth and 
perform assembly on it.
≥For wall mount, refer to page 40.
≥Keep the screws out of reach of children to prevent 
swallowing.
[BT730]
[BT330] [BT235]
Assembling the speakers
[BT730]
2 Front speakers
2 Stands (with cables)
2 Bases
4 Screws A
2 Screws B[BT330] [BT235]
2 Front speakers
2 Stands (with cables)
2 Bases
8 Screws
AB
1
2
2
1
Tighten 
securely.
Insert the wire fully.
r: White
s: Blue line
Push!
Leave about 80 mm (3 
5/32q) Tighten securely.Screw A
Press into the groove.
Screw BPull the cable 
straight along 
the line and 
slide into the 
groove. Back of the base
1
2
2
1
Slide into the groove.
Tighten securely.
Insert the wire fully.
r: White
s: Blue line
Push!
Position the cable 
between the ridges.
Leave about 120 mm (4 
23/32q)Press into the groove.
Tighten securely. Screw
SC-BT230_330_730P_PC_VQT2M13_eng.book  10 ページ  ２０１０年３月１６日　火曜日　午後５時５７分