Panasonic BLC1A_20A Owners Manual

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 41
2.4.2 Connecting the Camera to a Router that does not 
Support UPnP™
To allow access from the Internet with a router that does not support UPnPTM, follow 
the procedures below.
1.Select [Static] on the Network page.
2.Enable port forwarding*1 on the router.
Using the IP address and port number noted on step 1-(3), enable port 
forwarding on the router. See the router manual for how to enable port 
forwarding.
3.Register with the DynamicDNS service.
Port Forwarding feature*1
The port forwarding feature is required to allow camera access from the Internet 
with a router that does not support UPnPTM. It exchanges a local IP address for a 
global one. Each camera must be assigned a unique port number.
(1)Access the camera (see page 10).
(2)Click the [Setup] tab at the top of the page.
(3)Select [Static] on the Network page.
 The Static IP Address Configuration page is displayed. Make a 
note of the IP address and port number, since they are required to 
enable port forwarding on the router.
(4)Click [Save] without changing the settings.
(5)Click [Restart].
*1Port forwarding may be called Address translation, Static IP Masquerade, Virtual server 
or Port mapping in other products.
InternetGlobal IP address or URL
vvv.xxx.yyy.zzz:80
vvv.xxx.yyy.zzz:81
vvv.xxx.yyy.zzz:80      192.168.0.253:80
vvv.xxx.yyy.zzz:81      192.168.0.252:81
Port No.Port Forwarding feature
192.168.0.254
192.168.0.1
192.168.0.252
Por t  No. 81192.168.0.253Por t  No. 80Router
The IP addresses shown above may differ from those offered on your home network.Note 
						

							Operating Instructions
42
2.5 Registering with the DynamicDNS service
DynamicDNS is a service that allows you to assign an easy-to-remember name to 
the camera, for example, similar to your favorite web site. It also allows you to easily 
access the camera, even when your ISP changes the IP address. We recommend 
registering with a DynamicDNS to access the camera from the Internet. See 
http://
www.viewnetcam.com for details about the Viewnetcam.com service.
1.Click [DynamicDNS] on the Setup page.
 When you select [Disable] or [Viewnetcam.com] (see page 42)
 When you select [User-specified DynamicDNS] (see page 44)
 
When you select [Disable]
2.Click [Save].
 The DynamicDNS service is disabled.
 Clicking [Cancel] cancels your settings without saving changes.
 
When you select [Viewnetcam.com]
2.Click [Next].
 Clicking [Cancel] cancels your settings without saving changes. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 43
3.Click [Save].
 Clicking [Cancel] cancels your settings without saving changes, and the 
DynamicDNS window is displayed.
4.Click [OK].
 When finished, Success! is displayed.
 The new settings are saved.
5.Click [Go to Viewnetcam.com page].
 The Viewnetcam.com page is displayed.
6.Click Your Account Link.
 The Viewnetcam.com registration website is displayed.
Note
 When the Viewnetcam.com registration website is not displayed, confirm 
that the URL is displayed in the right column next to Your Account Link. If 
the URL is not displayed, follow the procedures below.
 Personal (Camera) URL is available after registering with the 
Viewnetcam.com service.
 If port forwarding is not enabled or your network is not connected to the 
Internet, the Viewnetcam.com service is not available.
7.Register with the Viewnetcam.com service following the instructions on the 
website.
 The Viewnetcam.com page is displayed.
SettingDescription
Personal 
(Camera) URL The cameras personal URL will be displayed after you 
register with the Viewnetcam.com service.
Your Account 
Link The URL required to register with the Viewnetcam.com 
service is displayed. Clicking [Your Account Link] item 
name displays the Viewnetcam.com registration website.
1.Wait for a moment, then click [Refresh] on the web browser.
2.Confirm that your network (your PC and camera) is connected to 
the Internet. 
						

							Operating Instructions
44
8.Access your camera with the registered URL from the Internet (see page 10).
 When the Top page is displayed, Viewnetcam.com registration is 
complete.
Note
 It may take a maximum of 30 minutes for the registered URL to work.
 If Expired is displayed for the Personal (Camera) URL on the 
Viewnetcam.com page or for the Camera URL at Viewnetcam.com on the 
Status page, restart the camera. After that, confirm that your registered 
URL is displayed on the pages.
Confirming Internet access
Due to the routers specifications, the image may not be displayed even if you 
access the camera from your PC on the same LAN as the camera. In this case, 
try:
 Accessing from a PC on another network (see page 10)
 Accessing from your cell phone (see page 25)
 
When you select [User-specified DynamicDNS]
2.Click [Next].
 Clicking [Cancel] cancels your settings without saving changes. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 45
3.Set each parameter.
 Clicking [Cancel] cancels your settings without saving changes.
 DynamicDNS information can be obtained from companies in the 
DynamicDNS service industry.
4.Click [Save] after finished.
 The new settings are saved.
 When finished, Success! is displayed.
5.Click [Go to DynamicDNS page].
 The DynamicDNS page is displayed.
SettingDescription
DynamicDNS 
Server URL*1
*1Note that [Space] and [] are not available.
Input URL acquired from the DynamicDNS service industry 
company. Enter 1—255 characters. The URL must be started 
with http://.
Updating timeSpecify the updating time.
User Name*2
*2Note that [] and [:] are not available.
Input User Name acquired from the DynamicDNS service 
industry company. Enter up to 63 characters.
Password*2Input Password acquired from the DynamicDNS service 
industry company. Enter up to 63 characters. 
						

							Operating Instructions
46
Note
 It may take several minutes for the registered URL to connect.
 Some DynamicDNS services may not connect.
Confirming Internet access
Due to the routers specifications, the image may not be displayed even if you 
access the camera from your PC on the same LAN as the camera. In this case, 
try:
 Accessing from a PC on another network (see page 10)
 Accessing from your cell phone (see page 25)
2.5.1 DynamicDNS Service
DynamicDNS allows you to choose an easy-to-remember address (such as 
bob.viewnetcam.com) that can be used to view images from your camera over 
the Internet.
What are the advantages of DynamicDNS service?
In order to view camera images over the Internet, you need to know your cameras 
global IP address. However, many Internet Service Providers (ISPs) assign their 
customers a dynamic IP address that changes monthly, weekly, or each time they 
log on. Unless you have been assigned a static IP address (an IP address that 
does not change periodically) by your ISP, you may find it difficult to access your 
camera over the Internet. The Viewnetcam.com service allows you to access your 
camera even if your assigned global IP address changes. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 47
How the DynamicDNS service works
1.Your ISP assigns a global IP address to your Internet access account that 
changes periodically. This is the address needed to access the camera over 
the Internet.
2.When your ISP-assigned global IP address changes, your camera 
automatically notifies the DynamicDNS service server of the new address in 
the DynamicDNS. The camera notifies the DynamicDNS service server of the 
new address in DynamicDNS in the following cases.
– When starting the camera
– When an update interval time has been set.
– When clicking the [Save] button
3.The DynamicDNS server contacts the Domain Name System (DNS) server 
and registers your new global IP address to your chosen DynamicDNS 
address (such as bob.viewnetcam.com).
4.When you enter your DynamicDNS address in your web browser while away 
from home or the office, the DNS server looks up the global IP address 
assigned to your DynamicDNS address.
5.The DNS server finds your current global IP address and allows you to connect 
to your camera.
Note
 Ask your ISP about what type of IP address you are using.
 Some ISPs assign you a local IP address. In this case, the DynamicDNS 
service cannot be used.
 If the camera is using a port number other than 80, the port number must 
be specified at the end of the DynamicDNS URL. For example: 
 
Using port 80: http://(Cameraname).viewnetcam.com  
Using any other port: http://(Cameraname).viewnetcam.com:Port 
Number
DynamicDNS service server
ISP
DNS 
server
Internet
New address registered with 
DNS serverCamera reports new address
Camera connection establishedGlobal IP address 
changes
Off-site PCOn-site Network 
Camera
DNS looks up 
current address3.
4.2.
1.
5. 
						

							Operating Instructions
48
2.6 Setting the Date and Time
The Date and Time page allows you to set and confirm the date and time. The date 
and time are used for the settings of the trigger setting, sensor log, operation time 
and Buffered Image page.
Note
Saving a new date and time deletes all buffered images on the internal 
memory.
1.Click [Date and Time] on the Setup page.
2.Set each parameter.
 Set [Automatic Time Adjustment] to synchronize the time automatically 
with an NTP server.
 Clicking [Cancel] cancels your settings without saving changes. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 49
3.Click [Save] when finished.
 The new settings are saved.
 When finished, Success! is displayed.
4.Click [Go to Date and Time page].
 The Date and Time page is displayed.
Note
Date and time settings become incorrect depending on the length of time the 
camera is turned on and its internal temperature. Using the Automatic Time 
Adjustment is recommended.
SettingDescription
Time Setting Set the date and format (AM/PM or 24 H). The interface and available 
values depend on the format. The date and time are used for the 
settings of the trigger setting, sensor log, operation time and Buffered 
Image page. Note that the format for the subject and file name of E-
mails by E-mail or FTP transfer can only be 24 h.
Automatic Time 
Adjustment NTP (Network Time Protocol) server synchronizes the cameras 
internal clock automatically every day. Check the box to enable it.
 Set the NTP server IP address. Set 4 numbers (0—255) 
and 3 periods, such as 192.168.0.253. Note that 0.0.0.0 
and 255.255.255.255 are not available. Set a host name 
(1—255 characters). Note that [Space], [], [], [&], [] are not available.
 Select your time zone.
Note
The camera will not synchronize to the NTP server if there 
is more than a 1 hour difference between the NTP server 
time and the cameras current time. This is to protect the 
cameras time setting from fraudulent NTP server 
tampering, incorrect time information, etc.
Adjust Clock for 
Daylight Saving 
Time During daylight saving time, the internal clock is turned 
forward an hour. The clock will shift one hour forward at the 
set time on the Start Day, and move back one hour at the 
set time on the End Day. Check the box to enable it.
Note
An s is inserted between the date and time of the time stamp 
when this feature is enabled. The time stamp is printed on 
images transferred by the Image Transfer feature. 
						

							Operating Instructions
50
2.7 Changing Camera Settings
The Camera page allows you to set the camera name, white balance, AC power 
source frequency and color night view.
1.Click [Camera] on the Setup page.
2.Set each parameter.
 Clicking [Cancel] cancels your settings without saving changes.
SettingDescription
Camera Name The camera name is displayed on the Single Camera page.
 Enter ASCII characters (see page 132) or characters from 
other languages (1—15 characters for a 1-byte character 
and 1—7 characters for a 2-byte character). Note that 
[Space], [], [], [&], [] are not available.