Panasonic BLC1A_20A Owners Manual

Operating Instructions
[For assistance, please call: 1-800-272-7033] 121
7.4 Using Setup Program
The Setup Program can be used for the following purposes.
 Finding the IP address and port number of the camera connected to your 
network.
 Setting up the camera automatically.
 Setting camera names manually. Configuring the Static or DHCP setting.
 Displaying the Setup page.
Finding the camera
1.Insert the CD-ROM into the CD-ROM drive of your PC.
 If the Panasonic Network Camera Setup window does not...

Operating Instructions
122
 If the following dialog box is displayed, click [Unblock].
 You can find the camera IP address and port number by looking up the 
MAC address of your camera. 
Note
 When trying to find multiple cameras, the MAC address on the rear side 
verifies which camera you are setting up.
 See page 125 for details about setup from the MAC address.
Camera 
Status
Camera 
List window Por t 
No. MAC 
Address
IP 
Address 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 123
Automatic Setup (Local or Internet Access) or Manual Setup
1.Click [Execute] on the Camera List window shown on page 122.
2.Click the corresponding button.
Note
See Getting Started for local and Internet access setup.
 
 
Sets up the camera to be viewed 
on the LAN.
 
Sets up Internet access to the 
camera.
 
Manually sets up the camera. 
 
Displays the Setup page (see 
page 
28). 

Operating Instructions
124
Manual Setup window
Set up each parameter referring to page 33—page 35.
 If more than 20 minutes have passed since the camera was turned 
on, the camera cannot be set up from the Setup Program. If the 
camera cannot be set up, restart the camera.
 If Camera setup completed is displayed, click [Close] to finish Manual 
Setup.
3.Close all Setup windows. 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 125
Setting up the Camera Using the MAC Address on the Setup 
Program
The Setup Program may not list any cameras due to your firewall or antivirus 
software settings on your PC. If you cannot disable your firewall or antivirus 
software, you can set up the camera using the camera MAC address as shown 
below. 
1.Enter the camera MAC address in the data field, and click [Set up camera].
Note
The cameras MAC address can be found on the...

Operating Instructions
126
3.Enter the user name and password, and click [Save].
4.The Enter Network Password window is displayed. Enter the user name and 
password that you set above, and click [OK].
5.When the Single Camera page is displayed, the setup is complete.
 If a Security Warning window is displayed, click [Yes]. (See page 14)
 See page 15 for Security Warning window when using Microsoft Windows 
XP Service Pack 2.
6.[For BL-C20A] Configure wireless configuration. (See page 36) 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 127
Note
 See page 12 for the Single Camera page.
 If you will enable Internet access to the camera, follow the procedures 
below.
When you are using a router that supports UPnP™
1.Enable the Auto Port Forwarding feature on the UPnP™ page (see 
page 
39).
2.Register with the DynamicDNS service on the DynamicDNS page 
(see page 
42).
3.Confirm that the camera can be accessed from the Internet (see page 
10). 
If you cannot access the...

Operating Instructions
128
7.5 Setting Your PC
7.5.1 Setting Proxy Server Settings on a Web Browser 
If a proxy server is not used, these settings are not required. If you are using a 
proxy server, perform the proxy server settings below.
 To communicate with a camera installed within a LAN, changing the web 
browser settings is recommended.
 The firewall of a proxy server in a corporate environment may prevent access 
to the camera. Consult your network administrator.
Note
 A proxy server is used to...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 129
3.Click the [Connections] tab, and click [LAN Settings].
4.See if the Use a proxy server for your LAN check box is checked or not. If 
checked, click [Advanced...].
 If not checked, click [Cancel]. Proxy settings are not required.
See if this check
box is checked or not.
If checked, 
click [Advanced...]. 

Operating Instructions
130
5.Enter the cameras IP address into the Do not use proxy server for addresses 
beginning with data field. (Example: 192.168.0.253)
6.Click [OK].