Panasonic Bb Hcm311a Owners Manual

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 41
What is the threshold?
The threshold is a value for the camera to detect motions on the image during the 
motion detection buffering. Setting the threshold lower allows subtler changes to 
be detected. Setting the threshold higher allows bigger changes that might occupy 
half the image to be detected.
What is the sensitivity?
The sensitivity is the brightness change level for the camera to detect as the 
motion....

Operating Instructions (Additional Features)
42
Note
 The motion detection is activated by object outlines changes and the 
brightness changes. This feature is designed to alleviate false detections 
by overall brightness changes due to sunlight. But in this case, the camera 
may falsely detect the rapid brightness changes by the artificial light such 
as the fluorescent light. In other cases, motion detection by the Network 
Camera Recorder detects whole objects and brightness changes. The 
way to...

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 43
Notifying Setup of an Alarm Log
Once a day, an alarm log sent at a specified time can be checked. To enable Alarm Log, 
set Alarm 1, Alarm 2 or Motion Detection for Trigger Setting and check [Enable].
When Alarm Log is used, the DNS server address setting is required. (See 2.2 
Connecting the Camera to Your IPv4 Network or 2.3 Connecting the Camera to Your 
IPv6 Network on the Operating Instructions.)
1.Click...

Operating Instructions (Additional Features)
44
 Alarm logs are deleted when resetting the camera to factory default.
 Alarm logs are deleted when you save new settings.
SettingDescription
A setup of operation Alarm log operation can be set here.
Time Set the date and time to send alarm logs via E-mail.
SMTP Server IP 
Address or Host 
Name
*1
*1But [Space], [], [], [&], [] are not available.
 If you set the server IP address, set 4 digits (0—255) 
and 3 periods such as 192.168.0.253. But 0.0.0.0...

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 45
Changing the Time Stamp Setting
The Time stamp setting is changed on the Image Display page.
SettingDescription
Time stamp setting You can display a time stamp on the upper left side of 
the image. Select from [Enable] or [Disable].
Note
 If you enable this feature, the time is also stamped 
on the buffered image.
 Set AM/PM format and 24H format on the Date 
and Time page. 

Operating Instructions (Additional Features)
46
Format the SD memory card
Before you record the camera image, you need to format the SD memory card.
Note
 You can confirm the SD memory capacity on the Status page.
1.Insert the SD memory card.
2.Click [Trigger] on the Setup page.
3.Click [Format].
4.Click [OK] on the confirmation window.
 Format is complete.
5.Click [Go to Trigger page].
 The Trigger page is displayed. 

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 47
Stop the SD Memory Recording
After you stop the SD memory recording, remove the SD memory card.
Note
 You can confirm the SD memory capacity on the Status page.
 If the camera is restarted, the SD memory recording starts again.
 If you remove the SD memory card and insert it again, the SD memory 
recording starts again.
1.Click [Trigger] on the Setup page.
2.Click [SD video recording stop].
3.Click [OK] on...

Operating Instructions (Additional Features)
48
Start the SD Memory Recording
The SD memory recording can be started on the Trigger page.
Note
 You can confirm the SD memory capacity on the Status page.
 If the camera is restarted, the SD memory recording starts again.
 If you remove the SD memory card and insert it again, the SD memory 
recording starts again.
1.Click [Trigger] on the Setup page.
2.Click [SD video recording start].
3.SD video recording was started. is displayed.
 The SD memory...

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 49
Adding [Alarm Log] on the Maintenance Window
Session Status function is added
The client information connecting to camera is displayed.
Clicking [Session Status] in the Maintenance page displays as follows.
Displaying Alarm Logs
Displays up to 50 Alarm Logs in order of time. Old logs will be overwritten by new 
one.
1.Click [Alarm Log] on Maintenance page.
2.Alarm Logs are displayed.
Maintenance
(1)Alarm...

Operating Instructions (Additional Features)
50
Note
If the camera is restarted, all alarm logs are deleted.
ItemDescription
New Alarm Logs Displays the number of new alarm logs.
Date Displays the date and time when the Alarm 1, 2, or Motion 
Detect were responded.
Sensor Type Displays the Trigger Setting (Alarm 1, 2, or Motion 
Detection) on the Trigger page.
Signal Type Displays the Alarm enable condition on the Trigger page 
when selected Alarm 1 or 2.