Panasonic Bb Hcm311a Owners Manual

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 21
7.Set the image buffer frequencies, and click [Next>].
Note
Due to the network environment, object, number of accesses, enabling IPsec, 
the camera may not record the numbers of images as you set. In this case, set 
the image buffer frequencies longer.
 Clicking [

Operating Instructions (Additional Features)
22
8.Select the transfer method, and click [Next>].
 Clicking [

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 23
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions (Additional Features)
24
SettingDescription
Server IP 
Address or 
Host Name
*1
*1But [Space], [], [], [&], [] are not available.
 If you set the server IP address, set 4 digits (0—255) and 3 
periods such as 192.168.0.253. But 0.0.0.0 and 
255.255.255.255 are not available. Or set a host name (1—
255 characters).
 You can set IPv6 address.
Por t  N o. Enter a number (1—65535). Usually set to 21.
Login ID*2
*2But [] is not available.
 If your ISP requires a login ID, set it...

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 25
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions (Additional Features)
26
SettingDescription
SMTP Server IP 
Address or Host 
Name
*1
*1But [Space], [], [], [&], [] are not available.
 If you set the server IP address, set 4 digits (0—255) and 
3 periods such as 192.168.0.253. But 0.0.0.0 and 
255.255.255.255 are not available. Or set a host name 
(1—255 characters).
 You can set IPv6 address.
Por t  N o. Enter a number (1—65535). Usually set to 25.
POP3 Server IP 
Address or Host 
Name
*1
 If you set the server IP address,...

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 27
9.After you confirm the settings and click [Next>], set E-mail notification and click 
[Next>].
 If you select [Enable], the E-mail Notification When Triggered page is 
displayed. Enter the settings seeing page 
25 and page 26. When finished, 
click [Next>] and go to step 10.
10.Click [Save] after confirming the settings.
 New settings are saved.
 When finished, Success! is displayed.
SettingDescription...

Operating Instructions (Additional Features)
28
11.Click [Go to Trigger page].
 The Trigger page is displayed.
Note
 If you set a short interval to transfer image to a cell phone, many E-mails 
may be sent to it leading to a large phone bill. Therefore, we recommend 
you to set a long interval. 1 image per minute frequency is recommended.
 Alarm transfer stops its operations until the camera finishes all transfers. 
For example, if the camera transfers 3 images per minute and 6 images in 
total, the...

Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 29
Buffering or Transferring Images by Motion Detection Signal
Camera has a Motion Detection feature that detects movement, such as people, 
based on the preset threshold and sensitivity of Camera. You can buffer the 
camera images, transfer to an FTP server or send E-mails using the Motion 
Detection function as a trigger.
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
1.Click...

Operating Instructions (Additional Features)
30
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer. 
 Clicking []. 
Note
If you enable the Lens Position When Triggered setting, buffer/transfer starts 
after the camera turns to the Home Position, Preset No.1–20, or Alarm No.1–2.
Tr i g g e r Selecting [Timer] enables the camera to buffer/transfer the 
image by timer.
 Selecting [Alarm 1 or 2] enables the camera to...