Panasonic Arbitrator Hardware Installation Manual

2
nd
Rear Camera (Option:CN258IR-P) Connection
P2 Recorder(Rear)
Car Battery12V/24V 
White to Battery (+)  
via Timer BoxBlack to Battery (-)
Yellow to Camera 2
2nd
Camera
(Front)
2nd
Camera 
Cable    

Control Panel (Option: AG-RCP30P) Connection
Control PanelP2 Recorder (Rear)
Control Panel Cable
To  
Control Panel      

LCD  
Screen
Auto  
Zoom
Book 
Mark
Backlight 
CompensationT: Zoom In  
W: Zoom Out 
REC/STOP  
LampREC  
ButtonSTOP 
Button
Audio 2 Mute  
Button/LampMute Audio 2 and lamp lights  
on by pushing this button.  
No recording while muting 
(lights on)
IR Mode(Auto/ON/OFF)
Volume
Control Brightness
Control Control Panel 
ON/OFF
Live/Archive
Switching Button
Skip 
(Back/Forward)
Return
To go back to previous  
menu or settingCursor Button 1) Lock LampLock except “REC”, “Menu”, 
“Control Panel ON/OFF”,...

•Insert new 16GB P2 cards to P2 Recorder (VPU)
• Go to “Config” by SI menu and select “Operations”.   
Press “Format” and then select “Yes”
(c) 
Press “Format” and select “Yes”.  
Then, “Format finished successfully” message  
will be appeared when the format is completed.
Before use, Format 16G P2 card by SI
 Formatting 16G P2 card is mandatory at the first ti me usage.  When modified (copy, delete, move etc) folders in P 2 Card, please format the card.
(If you copy the folders/files from 5 slot P2...

Before use, Format 16G P2 card by Control Panel
(Option: AG-RCP30P)
[Setup/Info]
[Admin] Page 2/2
•Insert new 16GB P2 cards to P2 Recorder (VPU)
• By Control Panel Menu, go to “Setup/Info”, “Admin ( page 2/2)”, “File Management” and select “Format”
• Press “Format” when “Format all P2 cards!!!” message  is appeared.   
Then, you will see “All cards are formatted” message  when the format is completed.
[Top Menu]
[File Management]
 Formatting 16G P2 card is mandatory at the first ti me usage.  When...

Select the removable disc drive in PC that inserted P2 card.  Right click 
on that drive and select “format”
5 slot P2 Drive  
(AJ-PCD20P)
Press “Format P2C” button on the unit
P2 Store 
（
（（
（AJ-PCS060G) By Control Panel Menu, go to “Setup Info”-”Admin”-”
File Management”-
”Format”
Control Panel
Select the removable disc drive in PC that inserted  P2 card.  Right click 
on that drive and select “format”
By SI Menu, go to “Config”-”Operations”-”Format”.
How to format?
PC PCMCIA slot 
(Windows)
SI 
(FE...

Appendix 

External GPIO Trigger (External LED)
If the officer would like to see the REC status from inside of car 
additionally, it is possible to set up the LED ligh t connecting to 
GPIO.   

Siren Detector Cable (Option)  

Siren Detector Cable (Option)
Specification:Contact Information:LIND Electronicswww.lindelectronics.comToll Free 1-800-659-5956