Panasonic Arbitrator Hardware Installation Manual

							Arbitrator Hardware Installation 
						

							Arbitrator SI Unit and Cables
Camera Cable(Short)
Power Cable  
for P2 recorder External GPIO 
Trigger Cable USB Extension 
Cable
GPS Antenna Camera
AG-CK10P
AG-CR12P
TDSS-900-PNA
Digital Wireless 
Mic Reciever & 
Transmitter
In Car Mic
Receiver Cable
AG-CPD15PP2 recorder (VPU)
AJ-P2C016RG
16GB P2 Card Camera Mount Camera Cable
(Long)
Control Panel  Cable
Control Panel
OPTIONS
2nd
Rear Camera
CN258IR-P
USB/LAN Adaptor
(including a driver CD) LAN Cable  
(Crossing type)
AG-RCP30P                   
						

							GPS Antenna
Car Battery12V/24V 
2nd
Rear Camera 
(Option)
CN258IR-P
8 Trigger Inputs  
(Siren/Light 
Bar/Brake/WMIC etc)
In car Camera
2nd
WMIC Receiver/
Transmitter 
(Option)
P2 Recorder (Rear)
AG-CPD15P
*USB Thumb Drive needs to be provided by 3
rd
vender
Toughbook 
(In car PC)
Control Panel
Arbitrator SI System Configuration
Power Cable
GPIO Trigger Cable
Camera Cable
LAN Cable
USB/LAN
Adaptor
Control Panel Cable
Digital RX/TX
OPTION: 
AG-RCP30P
AG-CK10P
USB Thumb Drive*
AG-CR12P
Front End 
Application (SI)
In car micDigital WMIC RX/TXTDSS-900-PNA
USB Extension Cable                  
						

							Recording engine
Clock
P2 Recorder
powerpower
signal(SA)
■ ■
■
P2 Recorder, Wireless MIC to Battery Connection (w/
 VPU timer)
Ignition etc.
RED
WHITE
Receiver (RX) Cable
Car Battery
12V/24V 
WMIC Receiver (RX)
BLACK to  
Battery-
WHITERED
RED
BLACK to  
Battery-
1A fuse is included 
In RX Cable
Fuse 5A
Fuse5A
(+)
(-)
“RED” cable 
: Connect via 
5A fuse (Not included in Arbitrator kit
)to 
Battery (+)
“WHITE” cable 
: Connect via 
5A fuse (Not included in Arbitrator kit
)to ACC line or switch.  
Don’t 
connect to Battery (+)
“BLACK” cable:  Connect to Battery ( - )     
						

							Recording engine
Clock
P2 Recorder
powerpower
signal(SA)
■ ■
■
P2 Recorder, Wireless MIC to Battery Connection (w/
 Charge Guard)
RED
WHITE
Receiver (RX) Cable
Charge
Guard
Car Battery 12V/24V 
WMIC Receiver (RX)
BLACK to  
Battery-
WHITERED
RED
BLACK to  
Battery-
1A fuse is included 
In RX Cable
Fuse 5A
Fuse5A
(+)
(-)
“RED” cable 
: Connect via 
5A fuse (Not included in Arbitrator kit
)to 
Battery (+)
“WHITE” cable 
: Connect via 
5A fuse (Not included in Arbitrator kit
)to ACC line or to the 
Charge Guard.  
Don’t 
connect to Battery (+)
“BLACK” cable:  Connect to Battery ( - )     
						

							AG-CR12P  
Cables for P2 RecorderPower Cable  
for P2 recorderExternal GPIO  
Trigger CableUSB  
Extension Cable
GPIO/Serial Connector
RS-232C
GPIO Trigger Cable       
						

							Network Cables(AG-CR11P), Control Panel Cable, Camera Cable
Control Panel  
Cable (included in AG-RCP30P)Camera Cable(included in AG-CK10P)USB/LAN Adaptor
(including a driver CD)
LAN Cable  
(Crossover type)       
						

							Black:  
Connect to the Connect to the 
NEGATIVENEGATIVE
((--) terminal of the battery) terminal of the battery
RS-232C:  Connect to equipment with serial connectors
Black (GND: - ):  Connect to the negative ( - ) termi nal of the batteryRed (BATT: +):
Connect 
via a 5A fuse
to a power supply
that is constantly on, regardless of ignition key ON/OFF statusWhite (SIGNAL) 
:  Connect the signal line via 5A fuse
to the ACC line or to the output terminal of a time r box
Power Cable
External GPIO Trigger Cable/Power Cable Connection
P2 Recorder 
(Rear)
External GPIO  
Trigger Cable
Others: Input signal lines 
White: REC Tally output line 
Gray: Input signal or Speed pulse signal      
						

							External GPIO Trigger
External GPIO Trigger Cable(supplied)
*GPIO for Wireless Mic, Light bar, Siren etc.. as a bove example.
*Serial (RS-232C, Pin number either of 2-8 & 20)  f or Rader Gun etcFor Low Voltage Output only (LED or Relay)
White
Out
GPIO9
25 Speed Sensor with pulse table setting only
Gray
In
GPIO8
24 OtherPurple
In
GPIO7
23 OtherBlue
In
GPIO6
22 Gun LockGreen
In
GPIO5
21 Siren IndicatorYellow
In
GPIO4
13 Brake IndicatorOrange
In
GPIO3
12 Light BarRed
In
GPIO2
11 Wireless MicBrown
In
GPIO1
10 Black 
MUST
be grounded (To ground at 
Negative battery terminal
)
Black
GPIO
GND
9
Trigger Name (Example)
Cable Color
Remark
Signal
Pin #
See “Cable Color” as below chart    
						

							2nd
Wireless Mic
Receiver (optional)
P2 Recorder (Rear)
Digital Wireless Mic Receiver Connection
To  
Audio In 2
To  
In Car Mic
To  
Audio In 1 
(RCA PIN)
Car Battery12V/24V 
Digital Wireless Mic
Receiver & Transmitter
Receiver (RX)To  
Receiver 
Jack
RX Cable Power (RED) 
To Battery via Timer BoxRX Cable Power GND (Black)To Battery (-)
RX Cable Trigger REC (Yellow) 
To either of GPIO 1 to 8 
(Ex. GPIO1 Brown)RX Cable GND (Black)To Battery(-)
External GPIO  
Trigger Cable
Receiver (RX)  
Cable
In Car Mic