Panasonic Aj Yad455 Operating Instructions Manual

10(E)
ENGLISH
AJ-D455 settings

OThe output data format can be converted by setting the
setup menu item No.881 (DIF TYPE).
DIF TYPE setting
DVCPRO
DVPlayback tape Output format
DVCPRO DVCPRO
DV
DVCPRO
DVDV
DV
AUTODVCPRO
DVDVCPRO
DV DVCPRO (
22)
22:“CH1/CH2” or “CH3/CH4” can be selected by setup
menu item No.890 (DIF AUD OUT) when the 32 KHz/
4CH audio signals are recorded on the playback tape.
NTSC regions 

11(E)
 
OWhen the recording tape is in the DVCPRO format, DV
format input data cannot be received or recorded.
Similarly, when it is in the DV format, DVCPRO format
input data cannot be received or recorded.
AJ-D455 settings
PAL regions
1.Check that the setup menu item No.220 (AV/C CMD
SEL) is set to “ON.”
3.When inputting signals from the digital video interface
board, set the VIDEO IN switch on the front panel to
“DV/DVCPRO.”
2.Check that “AUTO” has been selected as the setup
menu item No.882 (DIF IN...

12(E)
ENGLISH
OConnect the AJ-YAD455P with other units in a 1:1 format.
OUse the special-purpose cable (AJ-DTC2P or AJ-DTC4P)
to connect the AJ-YAD455P with the AJ-D455, AJ-D250
or AJ-D230H.
OTurning the power of the connected units ON or OFF or
connecting or disconnecting the interface cable may
disrupt the AV signals.
OIt may take some moments for the system to stabilize
when the input signals have been switched or when
operation has been transferred to another mode.
Proceed with recording operations...

13(E)
Item Setting
220 AV/C
CMD
SEL0000
0001OFFONFor selecting whether to use the
digital video interface AV/C
command when the
REMOTE/LOCAL switch is at the
REMOTE position.
0: The AV/C command is not used.
1: The AV/C command is used.
For setting the format used for
output.
0: The format is forcibly set to
DVCPRO for output.
1: The format is forcibly set to DV
for output.
2: The same format as that of the
playback tape is set. 881 DIF
TYPE
(21)0000
0001
0002
DVCPRO
DV
AUTO
No.Super-
imposed...

14(E)
ENGLISHItem
Setting
883 DIF
OUT
CH0000
[
0063
0064
0
[
63
AUTOFor setting the output channels.
0-63: These are fixed at designated
values.  
64: This is not fixed at a designated
value.  It is initialized to 63 when
the power is turned on or when
the cable is connected or
disconnected.
Expansion menu
Normally, the “DFLT” setting is used
for this item.  For further details,
consult your dealer. 886
DIF
CONFIG0000
0001
[
0255DFLT1
[
255 No.Super-
imposed
displaySuper-
imposed
display No.Description...

15(E)
DIAG menu
By installing the AJ-YAD455P in the AJ-D455, a DIAG menu
screen showing information relating to the digital video
interface is additionally provided.
For details on the DIAG menu display method, refer to the
operating instructions of the AJ-D455.
Item
EUI-64Description
Indicates the NODE UNIQUE ID of this unit.
Indicates the number of local bus connections.
Indicates the current PHY ID of this unit.
Indicates the PHY ID of the root on the local path.
Indicates the PHY ID of the...

16(E)
ENGLISH
The signals which have been input from
the digital video interface have neither
the DVCPRO nor DV format.
Warning messages
By installing the AJ-YAD455P in the AJ-D455, the following
warning messages are additionally provided.
These messages will appear on the mode display when
“T&S&M” has been selected as the setup menu item No.003
(DISPLAY SEL) setting.
Display on
monitor screen
(counter display)
UNKNOWN 
SIG (E-04)Description Operation
21
21
22
23 The compressed video signals which
have...

Printed in Japan
VQT9174S0401Y @
ji
PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY
DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA
Executive Office:
3330 Cahuenga Blvd W., Los Angeles, CA 90068   (323) 436-3500
EASTERN ZONE: 
One Panasonic Way 4E-7, Secaucus, NJ 07094   (201) 348-7621
Southeast Region:
1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024   (770) 338-6835
Central Region:
1707 N Randall Road E1-C-1, Elgin, IL 60123   (847) 468-5200
WESTERN ZONE: 
3330 Cahuenga Blvd W., Los...