Panasonic Aj Ya931g Operating Instructions Manual
Here you can view all the pages of manual Panasonic Aj Ya931g Operating Instructions Manual. The Panasonic manuals for Computer Equipment are available online for free. You can easily download all the documents as PDF.
Page 1
Analog Video Input Board Operating Instructions For NTSC (525i): AJ- G For PAL (625i): AJ- G ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL
Page 2
2(E) Precautions ODo not touch the product with wet hands. ODo not drop the product or expose it to bumps or shocks. ODo not attempt to modify the product. Doing so could cause it to malfunction.indicates safety information. CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, REFER MOUNTING OF THE OPTIONAL INTERFACE BOARD TO AUTHORIZED SERVICE PERSONNEL. For use with: Digital VTRs:AJ-SD930, AJ-SD955
Page 3
3(E) ENGLISH Installing the board 1Disconnect the power cord from the VTR. 2Remove the 2 coin screws, then remove the top panel. Coin screws CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of fire or electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Page 4
4(E) Installing the board 3Loosen the screw indicated in the diagram below, then remove the board clamp. 4Insert the analog video input board into the slot marked F2 located on the rear panel side of the VTR. Screw Board clamp F2
Page 5
![Page 5
5(E)
ENGLISH
Installing the board
Screw Board clamp
5Reattach the board clamp using the screw, then fix the
top panel in place using the 2 coin screws.
Specifications
Dimensions (WaHaD):
5a5 7/8a5/8inch (127a148a15 mm)
Weight:
0.275 lb (125 g)
Analog component input:
BNCa3 (Y, P
B, PR)
Y: 1.0 V [p-p], 75 Ω
P
B/PR:
AJ-YA931G;0.525/0.757 V [p-p] switchable, 75 Ω
AJ-YA932G;0.7 V [p-p], 75 Ω
Analog composite input:
BNCa2, loop through, 75 ΩON/OFF switchable
VIDEO: 1.0 V [p-p], 75 ΩON](http://img.usermanuals.tech/thumb/58/67812/w300_aj-ya931g_en_om_d-4.png "Page 5
5(E)
ENGLISH
Installing the board
Screw Board clamp
5Reattach the board clamp using the screw, then fix the
top panel in place using the 2 coin screws.
Specifications
Dimensions (WaHaD):
5a5 7/8a5/8inch (127a148a15 mm)
Weight:
0.275 lb (125 g)
Analog component input:
BNCa3 (Y, P
B, PR)
Y: 1.0 V [p-p], 75 Ω
P
B/PR:
AJ-YA931G;0.525/0.757 V [p-p] switchable, 75 Ω
AJ-YA932G;0.7 V [p-p], 75 Ω
Analog composite input:
BNCa2, loop through, 75 ΩON/OFF switchable
VIDEO: 1.0 V [p-p], 75 ΩON")
5(E) ENGLISH Installing the board Screw Board clamp 5Reattach the board clamp using the screw, then fix the top panel in place using the 2 coin screws. Specifications Dimensions (WaHaD): 5a5 7/8a5/8inch (127a148a15 mm) Weight: 0.275 lb (125 g) Analog component input: BNCa3 (Y, P B, PR) Y: 1.0 V [p-p], 75 Ω P B/PR: AJ-YA931G;0.525/0.757 V [p-p] switchable, 75 Ω AJ-YA932G;0.7 V [p-p], 75 Ω Analog composite input: BNCa2, loop through, 75 ΩON/OFF switchable VIDEO: 1.0 V [p-p], 75 ΩON
Page 6
ji PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANYUNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICAExecutive Office: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338-6835 Central Region: 1707 N Randall Road E1-C-1, Elgin, IL 60123 (847) 468-5200 WESTERN ZONE: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500...