Panasonic Aj Sdc615 Operating Instructions Manual

4
Chapter 4  Adjustments and settings for recording
31
4-4 Selecting the audio input signals
and adjusting their recording
levels
When the AUDIO SELECT CH1/CH2 switch is set to AUTO,
the recording levels on audio tracks CH1 and CH2 are
adjusted automatically.  On the other hand, when it is set to
MAN, the levels can be adjusted manually.
4-4-1 Selecting the audio input signals
Use the AUDIO IN switch to select the input signals to be
recorded on audio tracks CH1 and CH2.
For details, refer to “2-2 Audio...

Chapter 4  Adjustments and settings for recording
32
Tape continuity with the user bits
Selecting REGEN for the UB MODE item on the 
screen by performing menu operations will call up the user
bits recorded on the tape, making it possible to continue
recording from that value. However, it is not possible to record
the contents that were set.

The time code/user bits are also recorded in the VIDEO AUX
area of the unit’s memory. The time code (VITC) is the same
value as the sub code area’s time code (LTC)....

4
Chapter 4  Adjustments and settings for recording
33
4-5-2 Setting the internal clock’s date and
time
1Set the DISPLAY switch to UB.
2Press the HOLD button to cause DATE to be displayed in
the display window.
4Set the date (year/month/day) using the SHIFT button,
UP (+) button and DOWN (–) button.
5Press the HOLD button to cause TIME to be displayed in
the display window.
6Set the time (hour/minutes/seconds) using the SHIFT
button, UP (+) button and DOWN (–) button.
8Press the HOLD button to cause TIME...

GENLOCK INTC IN
TC OUT MON OUT
GENLOCK INTC IN
TC OUT MON OUT
TC OUT MON OUT
Chapter 4  Adjustments and settings for recording
34
Operating procedure for external locking
Follow the steps below for external locking.
1Set the POWER switch to ON.
2Set the TCG switch to F-RUN.
4Supply the reference time code and reference video
signal, which are in a phase relationship that satisfies the
time code standard, to the TC IN connector and
GENLOCK IN connector respectively.
3Set the DISPLAY switch to TC.
4-5-3...

4
Chapter 4  Adjustments and settings for recording
35
Concerning the user bit setting during external lock
When the unit’s time code is externally locked, only the time
data is locked to the time data of the time code supplied from
the external source.  This means that the user bits can be set
separately for each component.
When the  screen is opened from the VTR menu
page and EXT is selected as the UB MODE item setting by
performing menu operations, the user bits can also be locked
to the user bits of...

Chapter 4  Adjustments and settings for recording
36
4-6-2 Basic menu operations
Menu items are selected and entered using the MENU button
and JOG dial button.  The menus have a hierarchical
configuration consisting of the main menu, sub menus and
setting item menus.
The data which has been set is written and saved in a non-
volatile memory.
The operations performed for the MAIN MENU are described
here but the operating procedure is the same for the other
menus as well except for the screen displays....

4
Chapter 4  Adjustments and settings for recording
37
2Turn the JOG dial button to move the arrow (cursor) to
the item which is to be set, and the sub menu screen
appears when the JOG dial button is pressed.
3Turn the JOG dial button to move the arrow (cursor) to
the item which is to be set, and the setting item menu
screen appears when the JOG dial button is pressed.
**** MAIN MENU ****
SYSTEM SETTING
PAINT
VF
#OPERATION
FILE
MAINTENANCE
VTR MENU
USER MENU SELECT
4Turn the JOG dial button to move the...

Chapter 4  Adjustments and settings for recording
38
4-7-2 Viewfinder screen status display
configuration
All the items that can be displayed are laid out inside the
viewfinder as shown in the figure below.
4-7-3 Selecting the viewfinder screen
display items
To select which items are to be displayed on the viewfinder
screen, perform menu operations to open the  screen or  screen from the
VF page, and select ON or OFF for the display or select the
type desired for each item concerned.
For details on...

4
Chapter 4  Adjustments and settings for recording
39
This indicates the master gain setting.
Example: LOW = 0
When S.GAIN and DS.GAIN functions have been allocated to the user switches,
the corresponding gain values are displayed.  The user switch displays do not
appear unless the S.GAIN and DS.GAIN functions have been allocated.
Display item What is displayed Status when display appears
1ExtenderEX2 This appears when the lens extender is in use.
2MODE CHECK
dedicated display
area(STATUS:
master gain,...

Chapter 4  Adjustments and settings for recording
40
Display item What is displayed Status when display appears
This appears when the position of the WHITE BAL switch has been
changed.  “A,” “B” or “PRE” appears at #.  VAR ¢.¢ K is displayed
when channel A, Y is set to VAR. ATW MODE is displayed when ATW
is assigned to channel B.
This appears when the AUTO KNEE switch has been set to ON or OFF.
This appears when the gain has been selected using the GAIN selector
switch or USER button.
This indicates the...