Panasonic Aj Sd93 Operating Instructions Manual

– 21–
No./Item Description
008
DISPLAY SELThis selects what information is to
be provided by the time code and
other super displays output to the
VIDEO MON connector.
0000 TIME :Data only.
(The data indicates the value for
whichever of CTL, TC or UB
currently selected by the COUNTER
button.)
0001
T&STA:
Data and operation status.
0002 T&S&M :
Data, operation status and mode.
0003 T&RT : Data and REC TIME
0004 T&YMD : 
Data and REC DATE 
(year/month/day)
0005 T&MDY :
Data and REC DATE
(month/day/year)...

– 22–
Setup menus (continued)
USER menu 
The underlined items indicates the initial setting.
No./Item Description
009
CHARA H-POSThis sets the position of the characters
on the horizontal plane for the time
code and other super displays output to
the VIDEO MON connector.
Note:
Press the joystick, then you can set
the position of the characters by
inclining it up or down or to the left or
right.0000 0
::
0004
4
::
0016 16
010
CHARA V-POS
This sets the position of the characters
on the vertical plane for...

– 23–
Setup menus (continued)
USER menu 
The underlined items indicates the initial setting.
No./Item Description
100
SEARCH ENAThis sets the method used to transfer
to the search mode (stick operation).
0000STICK:
Operation transfers to the search
mode when the SEARCH button is
pressed or the stick is operated.
0001 KEY :
Operation is not transferred to the
search mode unless the SEARCH
button is pressed.
101
SHTL MAXThis sets the maximum speed for
shuttle
0000 x8.4 :8.4x normal speed
0001
x16 :16x...

– 24–
Setup menus (continued)
The underlined items indicates the initial setting.
USER menu 
No./Item DescriptionNo./Item Description
115
EJECT SW
INHThis selects whether to enable or
disable the operation of the EJECT
button on the front panel.
0000
REC :
Operation is disabled while the unit
is in the recording mode.
0001 OFF  :
Operation is enabled in all modes.
120
EJECT EE SELThis selects the modes for the
picture and sound output when the
tape is ejected.
0000
EE :EE mode
0001 BLACK  :
The picture...

– 25–
Setup menus (continued)
The underlined items indicates the initial setting.
No./Item Description
USER menu 
No./Item Description
401
SRC
PROTECTWhen the time selected as the setup
menu item No. 400 (STILL TIMER)
setting elapses while the unit is in
the search STILL (JOG/SLOW/SHTL)
mode, the unit automatically enters
one of the tape protection modes.
This menu item is for selecting
which tape protection mode the unit
is to enter.
0000
STEP: STEP FWD
0001  HALF : HALF LOADING
Note:
When STEP FWD is...

– 26–
Setup menus (continued)
USER menu 
The underlined items indicates the initial setting.
No./Item Description
506
BINARY GPThis sets the usage status of the
user bit of the time code generated
by the TCG.
0000
000:
NOT SPECIFIED (character set not
specified)
0001 001 :
ISO CHARACTER (8 bits character
set based on ISO646, ISO2022)
0002 010 :
UNASSIGNED 1 (undefined)0003 011 :UNASSIGNED 2 (undefined)0004 100 :UNASSIGNED 3 (undefined)0005 101 :PAGE/LINE
0006 110 :UNASSIGNED 4 (undefined)0007 111...

– 27–
USER menu 
Setup menus (continued)
The underlined items indicates the initial setting.
No./Item Description
510
TC OUT REFThis is used to switch the phase of
the time code, which is output from
the TIME CODE OUT connector, for
the external LTC input when the
TCG switch is at the EXT position.
0000
V OUT:
Time code is synchronized with
output video signal.
0001 TC_IN :
Time code is synchronized with
external time code input.
511
VITC OUTThis selects how the VITC which is
to be superimposed onto the...

– 28–
Setup menus (continued)
The underlined items indicates the initial setting.
USER menu 
No./Item Description
600
INT SGThis selects the internal reference signal.
0001 BB :
The black burst is generated.
0002 CB100 :
100% color bars are generated.
0003
CB75:
75% color bars are generated.
602
V-MUTE
SELThis selects whether to mute the
video output signals when a blank
on the tape has been detected
during playback.
0000   N-MUTE : No muting. (Freeze)
0001
LOW RF:Muting. (Set to gray.)
603
CC (F1)...

– 29–
660
UMID RECThis selects whether or not to
record the UMID information on the
tape.
0000 OFF :
UMID information is not recorded on
the tape.
0001
ON:
UMID information is recorded on the
tape.
Note:
If 1394 has been selected as the input
signals using the INPUT SELECT
button, UMID will not be recorded even
when it is set to ON unless the input
signal can be detected.
Setup menus (continued)
624
CC REC
(For AJ-SD93P)
For selecting whether to record the
closed caption signals multiplexed
on the input...

– 30–
Setup menus (continued)
USER menu 
The underlined items indicates the initial setting.
No./Item Description
662
UMID POSThis sets the line on which the
UMID information is to be
superimposed.
Notes:
• The line selected for the setup menu
item No. 501 (VITC POS-1) and No.
502 (VITC POS-2) settings cannot be
selected for this item.
• The default settings are not restored
even if the RESET button is pressed
while holding down the SEARCH
button.
(For AJ-SD93E)
0000 BLANK
0001 8L
::
0010
17L
::
0015...