Panasonic Aj Sd93 Operating Instructions Manual

							– 21–
No./Item Description
008
DISPLAY SELThis selects what information is to
be provided by the time code and
other super displays output to the
VIDEO MON connector.
0000 TIME :Data only.
(The data indicates the value for
whichever of CTL, TC or UB
currently selected by the COUNTER
button.)
0001
T&STA:
Data and operation status.
0002 T&S&M :
Data, operation status and mode.
0003 T&RT : Data and REC TIME
0004 T&YMD : 
Data and REC DATE 
(year/month/day)
0005 T&MDY :
Data and REC DATE
(month/day/year)
0006 T&DMY :
Data and REC DATE
(day/month/year)
0007 T&UB :
Data and user bit.
However, when UB has been
selected with the COUNTER button,
the time code is displayed after the
user bit.
0008 T&CTL :
Data and CTL data.
However, when CTL has been
selected with the COUNTER button,
the time code is displayed after the
CTL data.
0009 T&T : 
The data and time code recorded in
the VAUX area are displayed.
0010 VITC:
The time code and user bit recorded
in the VAUX area are displayed.
Notes:
•Mode display:
DVCPRO 50 (50 Mbps) = 
DVCPRO_50,
DVCPRO (25 Mbps) = DVCPRO,
DV = DV, DVCAM = DVCAM
•An error message appears if a
warning or error has occurred when
“T&S&M” has been selected as this
setting.
•
REC TIME and REC DATE are
displayed during DV/DVCAM, playback
only. With the DVCPRO50 (50 Mbps) or
DVCPRO (25 Mbps) format, the
operating mode is 
displayed.
No./Item Description
001
LOCAL ENAThis selects the buttons which can
be operated on the front panel when
the CONTROL switch has been set
to REMOTE.
0000 DIS :
No buttons can be operated.
0001
ST&EJ:
Only the STOP and EJECT buttons
can be operated.
0002 ENA :
All buttons can be operated.
002
TAPE TIMER
This selects the 12 or 24 hour display
for the CTL counter.
0000±12h: 12 hour display
0001 24h : 24 hour display
003
REMAIN SELThis selects whether the remaining
tape time and total tape length are
to be displayed in the
superimposed display of the VIDEO
MON connector signals.
0000 OFF: No display.
0001
2L:
The remaining tape time is
displayed on the second line.
0002 1L :
The remaining tape time is
displayed on the first line.
0003 R/TTL :
The remaining tape time is
displayed on the first line, and the
total tape length is displayed in the
second line.
Notes:
• When “2L” is selected, the remaining
tape time is not displayed if “TIME” or
“VITC” has been selected as the
setup menu item No.008 (DISPLAY
SEL) setting.
• When “R/TTL” is selected, the total
tape length is not displayed if “TIME”
or “VITC” has been selected as the
setup menu item No.008 (DISPLAY
SEL) setting.
Setup menus (continued)
USER menu 
The underlined items indicates the initial setting. 
						

							– 22–
Setup menus (continued)
USER menu 
The underlined items indicates the initial setting.
No./Item Description
009
CHARA H-POSThis sets the position of the characters
on the horizontal plane for the time
code and other super displays output to
the VIDEO MON connector.
Note:
Press the joystick, then you can set
the position of the characters by
inclining it up or down or to the left or
right.0000 0
::
0004
4
::
0016 16
010
CHARA V-POS
This sets the position of the characters
on the vertical plane for the time code
and other super displays output to the
VIDEO MON connector.
Notes:
• Press the joystick, then you can set
the position of the characters by
inclining it up or down or to the left or
right.
• When the DISPLAY SEL status
causes characters to extend beyond
the edges of the screen, the setting
value is changed but the characters
are automatically displayed at a
position on the screen where they will
not extend.
(For AJ-SD93E)
0000 0
::
0023
23
::
0028 28
(For AJ-SD93P)
0000 0
::
0018
18
::
0022 22
011
CHARA TYPEThis selects the display type for the
super display output to the VIDEO
MON connector as well as for displays
such as the setting menu, etc.
0000WHITE:
White characters against a black
background.
0001 W/OUT :
White characters with a black
border.No./Item Description
012
SYS FORMATThis sets the VTR’s recording and
playback format.
0000
50M:
DVCPRO50 (50 Mbps) is selected.
0001 25M :
DVCPRO (25 Mbps) is selected.
Note:
The format complies with the setting of
this menu item when the tape is
ejected.
017
CHARA SIZEThis selects the size of the
characters for the superimposed
display output from the VIDEO MON
connector.
0000
NORMAL:Standard size
0001 LARGE :
4 times larger than the standard
size
Note:
When LARGE has been selected, only
time data is displayed, regardless of
the setup menu No.008 (DISPLAY
SEL) setting. 013
PB FORMATThis sets the format in which the
tape is to be played back.
0000 MANUAL :
The format complies with the setting
of setup menu No. 012 (SYS
FORMAT) when a DVCPRO
cassette is inserted. The format
complies to the format recorded on
the tape when a DV or DVCAM
cassette is inserted.
0001
AUTO:
The format complies with the format
recorded on the tape.
Note:
When AUTO has been selected, the
picture and sound may be disturbed
until the format is detected after a tape
is loaded. 
						

							– 23–
Setup menus (continued)
USER menu 
The underlined items indicates the initial setting.
No./Item Description
100
SEARCH ENAThis sets the method used to transfer
to the search mode (stick operation).
0000STICK:
Operation transfers to the search
mode when the SEARCH button is
pressed or the stick is operated.
0001 KEY :
Operation is not transferred to the
search mode unless the SEARCH
button is pressed.
101
SHTL MAXThis sets the maximum speed for
shuttle
0000 x8.4 :8.4x normal speed
0001
x16 :16x normal speed
0002 x32 :32x normal speed
104
REF ALARMThis selects whether to warn the
operator when the REF. VIDEO
signal has not been connected.
0000 OFF :
Warning is not given.
0001
ON:
Warning is given by the flashing
STOP lamp.
Note:
Video and audio output may be disturbed
when the reference video signal is not
input, so it is recommended that a
system which inputs the reference video
signal be used.
102
FF. REW MAXThis sets the maximum speed for
FF and REW operations.
0000 x16 :16(32)x normal speed
0001 x32 :32(60)x normal speed
0002
x50:50(100)x normal speed
Notes:
•The speeds given in the parentheses
apply in the DVCPRO (25 Mbps), DV
and DVCAM mode.
•With mini DV or mini DVCAM cassette,
the maximum speed is set to 32x
regardless of this item’s settings.
107
PLAY DELAYThis set the play delay time in frame
increments.
0000
0
::
0015 15
108
CAP.LOCKThis selects the CAPSTAN LOCK
mode.
Note:
Color framing for the VIDEO MON
connector output is not guaranteed.
(For AJ-SD93E)
00002F:2F mode
0001 4F :4F mode
0002 8F :8F mode
(For AJ-SD93P)
00002F:2F mode
0001 4F :4F mode
No./Item Description
111
FRZ MODE
SELThis selects the output picture in the
STANDBY OFF (HALF LOADING) and
EJECT modes.
0000DIS:The video output is muted.0001 STB OFF:When the STANDBY OFF (HALF
LOADING) mode is established, the
picture being played back at the time is
frozen and output.
0002 SOF&EJ:When the STANDBY OFF (HALF
LOADING) or EJECT mode is
established, the picture being played
back at the time is frozen and output.
Notes:
•The freeze status complies with the setup
menu item No.605 (FREEZE SEL) setting.
•The playback screen freezes only
when setup menu No. 122 (STOP EE
SEL) is set to STOP.
•
In the EJECT mode, the freeze image is
output only when BLACK or GRAY is
selected as the setup menu item No.120
(EJECT EE SEL) setting.
109
AUTO REWThis selects whether to rewind the
tape automatically to the tape start
when the tape end is detected.
0000
OFF:
The tape stops at the tape end.
0001 ON :
The tape is rewound to the tape start.Note:
The tape stops near the BEGIN point
when setup menu No. 160 (MEMORY
MODE) is set to M-STOP.
112
V IN SEL INHThis selects whether video input
switching using the INPUT SELECT
button is to be enabled or disabled.
0000
OFF:
Video input switching using the
INPUT SELECT button is enabled.
0001 ON :
Video input switching using the
INPUT SELECT button is disabled.
0002 REC :
Video input switching using the
INPUT SELECT button after the unit
has been transferred to a recording
(but not editing) mode is disabled.
113
A IN SEL INHThis selects whether audio input
switching using the INPUT SELECT
button is to be enabled or disabled.
0000
OFF:
Audio input switching using the
INPUT SELECT button is enabled.
0001 ON :
Audio input switching using the
INPUT SELECT button is disabled.
0002 REC :
Audio input switching using the
INPUT SELECT button after the unit
has been transferred to a recording
(but not editing) mode is disabled.
YA93P
YA93P
This appears only when the optional board
AJ-YA93P has been installed.
YA93P 
						

							– 24–
Setup menus (continued)
The underlined items indicates the initial setting.
USER menu 
No./Item DescriptionNo./Item Description
115
EJECT SW
INHThis selects whether to enable or
disable the operation of the EJECT
button on the front panel.
0000
REC :
Operation is disabled while the unit
is in the recording mode.
0001 OFF  :
Operation is enabled in all modes.
120
EJECT EE SELThis selects the modes for the
picture and sound output when the
tape is ejected.
0000
EE :EE mode
0001 BLACK  :
The picture turns black, and the
sound is muted.
0002 GRAY  :
The picture turns gray, and the
sound is muted.
Note:
The IEEE 1394 digital output video will
be black even if GRAY is selected.
121
F/R EE SEL
This selects whether the EE mode or
playback mode is to be established
during fast forwarding or rewinding.
0000EE :EE mode
0001 TAPE  :Playback mode
122
STOP EE SELThis select whether the EE mode or
playback mode is to be established
when operation is stopped.
0000
EE :EE mode
0001 TAPE  :Playback mode
Note:
The selection is complied with even in the
standby OFF mode. However, the picture
will turn gray (black for IEEE 1394 digital
output) when TAPE is selected.
160
MEMORY
MODEThis sets the repeat play mode.
0000
OFF :
No repeat play (normal operation)
0001 M-STOP :
The tape stops near the BEGIN point when a
FF or REW operation has been performed.
0002 REPT1 :During playback, the tape is rewound to the
BEGIN point and stopped when the END
point is reached.
0003 CONT :During playback, the tape is rewound to the
BEGIN point and then played, and these
steps are repeated when the END point is
reached.
161
CTL BGN
or
TC BGNThis sets the BEGIN point in the
repeat play mode.
Whether TC or CTL is displayed on the counter
when the COUNTER button is pressed is set
here. When there is no setting, --:--:--:-- appears,
and the tape start serves as the BEGIN point.
162
ENDThis sets the END point in the
repeat play mode.
Whether TC or CTL is displayed on the counter
when the COUNTER button is pressed is set
here. When there is no setting, --:--:--:-- appears,
and the tape end serves as the END point.
163
REPT MODEThis sets the output image when the
tape returns to the BEGIN point in
the repeat play mode.
0000
FREEZE:
The tape returns to the BEGIN point
while the playback image at the
END point remains frozen.
0001 BLACK :
The tape returns to the BEGIN point while
a BLACK picture remains on the screen.
0002 EE_SEL :
The tape returns to the BEGIN point
with an image which is in
compliance with the setup menu
item No.121 (F/R EE SEL) setting.
Note:
If, when FREEZE has been selected, the
END point has been set at the tape end,
the playback image will not be frozen
properly. Set the END point in a range
where pictures have been recorded.
202
ID SELThis sets the ID information to be
returned to the controller.
0000 OTHER :
0001
DVCPRO:
0002 ORIG :
Notes:
• ID information of any VTR except for
the DVCPRO’s is set in OTHER.
• 
The ORIG setting should only be used
when a Panasonic controller (AG-A850
etc. sold separately) is connected.
114
REC INH
LAMPThis selects whether to cause the
REC INH lamp to flash or light up
when the cassette has been set to the
accidental erasure prevention status.
0000LIGHT:The lamp lights up.
0001 FLASH :The lamp flashes.
Note:
When the REC INHIBIT switch is set to
ON, the REC INH lamp always lights
regardless of the general setting status.
YA93P
USER menu 
No./Item Description
This appears only when the optional board
AJ-YA93P has been installed.YA93P 
						

							– 25–
Setup menus (continued)
The underlined items indicates the initial setting.
No./Item Description
USER menu 
No./Item Description
401
SRC
PROTECTWhen the time selected as the setup
menu item No. 400 (STILL TIMER)
setting elapses while the unit is in
the search STILL (JOG/SLOW/SHTL)
mode, the unit automatically enters
one of the tape protection modes.
This menu item is for selecting
which tape protection mode the unit
is to enter.
0000
STEP: STEP FWD
0001  HALF : HALF LOADING
Note:
When STEP FWD is selected, the unit
automatically goes into the STANDBY
OFF (HALF LOADING) mode when
the total time for which the unit is left
standing in the still status reaches 30
minutes (or 1 minute for a DV/DVCAM
tape).
402
DRUM
STDBYThis selects the drum operation in
the STANDBY OFF (HALF
LOADING) mode.
0000 OFF :
The drum stops rotating.
0001
ON:
The drum continues rotating.403
STOP
PROTECTWhen the time selected as the setup
menu item No. 400 (STILL TIMER)
setting elapses while the unit is in
the STOP mode, the unit
automatically enters one of the tape
protection modes. This menu item
is for selecting which tape
protection mode the unit is to enter.
0000 STEP : STEP FWD
0001
HALF: HALF LOADING
Note:
When STEP FWD is selected, the unit
is automatically transferred to the
STANDBY OFF (HALF LOADING)
mode when the total time during which
it has been left standing in the STOP
mode reaches 30 minutes (or 1 minute
for a DV/DVCAM tape).
400
STILL TIMERThis selects the time to be taken until
the unit goes into the tape protection
mode when it is left standing in the stop
or search still (JOG/SLOW/SHTL) mode.
(Unit: s = second, min = minute)
0000 0.5s
0001 5s
0002 10s
0003 20s
0004 30s
0005 40s
0006 50s
0007 1min
0008
2min
Notes:
• 
STEP FWD and HALF LOADING are
provided in the tape protection mode.
Either of these can be set for STOP
and SEARCH STILL.
• The cumulative standby time at the
same tape position increases when
transmitting programs or otherwise
using identical materials repeatedly. In
order to protect the tape, it is
recommended that the shortest
possible setting for the standby time in
the same tape location is used.
• When a DV/DVCAM tape is used,
any setting above 10 seconds will be
treated as 10 seconds. 
						

							– 26–
Setup menus (continued)
USER menu 
The underlined items indicates the initial setting.
No./Item Description
506
BINARY GPThis sets the usage status of the
user bit of the time code generated
by the TCG.
0000
000:
NOT SPECIFIED (character set not
specified)
0001 001 :
ISO CHARACTER (8 bits character
set based on ISO646, ISO2022)
0002 010 :
UNASSIGNED 1 (undefined)0003 011 :UNASSIGNED 2 (undefined)0004 100 :UNASSIGNED 3 (undefined)0005 101 :PAGE/LINE
0006 110 :UNASSIGNED 4 (undefined)0007 111 :UNASSIGNED 5 (undefined)
507
PHASE
CORRThis selects whether to control the
phase correction of the LTC which
is output from the TIME CODE OUT
connector.
0000
OFF:
Phase correction control is not
performed.
0001 ON :
Phase correction control is
performed.
508
TCG CF
FLAGThis selects whether the CF flag of
the TCG is to ON.
0000
OFF:CF flag is OFF.
0001 ON :CF flag is ON.
509
DF MODE
(For AJ-SD93P)
This selects the DF or NDF mode for
CTL and TCG.
0000
DF:
The drop frame mode is used.
0001 NDF :
The non-drop frame mode is used.
Note:
DF/NDF switching is valid only when
the CONTROL switch is set to LOCAL
or the setup menu No. 001 (LOCAL
ENA) is set to ENA.
No./Item Description
500
VITC BLANKFor selecting whether to output the
VITC signal at the positions selected by
setup menu items No. 501 (VITC POS-1)
and No. 502 (VITC POS-2).
0000 BLANK :
VITC signals are not output.
0001
THRU:
VITC signals are output.
501
VITC POS-1This sets the position where the
VITC signal is to be inserted.
Notes:
• 
The same line as the one used for the
setup menu items No. 502 (VITC POS-
2) and No. 662 (UMID POS) setting
cannot be set.
• The default settings are not restored
even if the RESET button is pressed
while holding down the SEARCH
button.
(For AJ-SD93E)
0000 7L
::
0004
11L
::
0015 22L
(For AJ-SD93P)
0000 10L
::
0006
16L
::
0010 20L
502
VITC POS-2This sets the position where the
VITC signal is to be inserted.
Notes:
• 
The same line as the one used for the
setup menu items No. 501 (VITC POS-
1) and No. 662 (UMID POS) setting
cannot be set.
• The default settings are not restored
even if the RESET button is pressed
while holding down the SEARCH
button.
(For AJ-SD93E)
0000 7L
::
0006
13L
::
0015 22L
(For AJ-SD93P)
0000 10L
::
0008
18L
::
0010 20L
503
TCG REGENThis selects the signal to be
regenerated when the time code
generator (TCG) in the REGEN
mode.
0000
TC&UB:
Both the time code and user bit are
regenerated.
0001 TC :
Only the time code is regenerated.
0002 UB :
Only the user bit is regenerated.505
EXT TC SELThis selects the time code to be
used when an external time code is
to be used.
0000
LTC:
The LTC of the TIME CODE IN
connector is used.
0001 VITC :
The VITC of the input video signal
or the timecode of the IEEE 1394
digital input signal is used.
Note: 
Operation uses the VITC setting if AJ-
YA93P is not installed.
YA93P
YA93P
This appears only when the optional board
AJ-YA93P has been installed.
YA93P 
						

							– 27–
USER menu 
Setup menus (continued)
The underlined items indicates the initial setting.
No./Item Description
510
TC OUT REFThis is used to switch the phase of
the time code, which is output from
the TIME CODE OUT connector, for
the external LTC input when the
TCG switch is at the EXT position.
0000
V OUT:
Time code is synchronized with
output video signal.
0001 TC_IN :
Time code is synchronized with
external time code input.
511
VITC OUTThis selects how the VITC which is
to be superimposed onto the output
video signal is to be output.
0000
SBC:
During recording:
The input time code, which was
selected by the setup menu No.
505 (EXT TC SEL) setting and
TCG switch, is output as the
VITC.
During playback:
The time code recorded in the
SBC area is output as the VITC.
0001 VAUX :
During recording:
The time code detected from the
input video signal is output as the
VITC.
During playback:
The time code recorded in the
VAUX area is output as the
VITC.
Notes:
• The time code detected from the
input video signal is automatically
recorded in the VAUX area while
pictures are being recorded.
• If Y PB PR, CMPST, or SDI is
selected as the input signal, the VITC
output during recording is a timecode
superimposed on the input signal
regardless of the above setting.
514
VITC GENThis selects whether or not to
record the internal time code
generator value in the VAUX area.
0000
OFF:
The internal time code generator
value is not recorded in the VAUX
area. When video signals on which
the time code has been recorded
are input, the time code of the input
signals is recorded in the VAUX
area.
0001 ON :
The internal time code generator
value is recorded in the VAUX area.
513
RUN MODEThis sets the operation mode which
is to make the internal time code
generator advance.
0000
REC:
The internal time code generator is
advanced during recording.
0001 FREE :
When the power is on, the internal
time code generator is advanced
regardless of the operation mode.No./Item Description
SBC (sub code data) area:
This area is separate from the video and audio data area
on the helical track. The time code complying with
SMPTE/EBU standards is stored here. As with the
conventional LTC (linear time code), the time code can be
read even during rewinding or fast forwarding. It can also
be read out when the tape has stopped.
VAUX (video auxiliary data) area:
This area is to be found in the video data area on the
helical track.
The additional information relating to the video data is
stored here.
Note:
The time code and user bit are controlled during tape
playback by the data which has been recorded in the
SBC area. This means that all the data recorded in the
SBC area alone is used as the data which is to be
indicated on the counter display section in the middle of
the front panel or in the superimposed display, or as
the data which is to be transmitted to the editing
controller or other unit.
This appears only when the optional board
AJ-YA93P has been installed.
YA93P
YA93P 
						

							– 28–
Setup menus (continued)
The underlined items indicates the initial setting.
USER menu 
No./Item Description
600
INT SGThis selects the internal reference signal.
0001 BB :
The black burst is generated.
0002 CB100 :
100% color bars are generated.
0003
CB75:
75% color bars are generated.
602
V-MUTE
SELThis selects whether to mute the
video output signals when a blank
on the tape has been detected
during playback.
0000   N-MUTE : No muting. (Freeze)
0001
LOW RF:Muting. (Set to gray.)
603
CC (F1)
BLANK
(For AJ-SD93P)
This selects ON or OFF for the closed
caption signal of the first field.
0000   BLANK : Signal is forcibly blanked.
0001THRU:Signal is not blanked.
604
CC (F2)
BLANK
(For AJ-SD93P)
This selects ON or OFF for the closed
caption signal of the second field.
0000   BLANK : Signal is forcibly blanked.
0001THRU:Signal is not blanked.
605
FREEZE SELThis selects the freeze mode for still
pictures.
0000
FIELD:Field freeze.
0001 FRAME :Frame freeze.
Note:
When frame freeze has been selected,
the frame slow status is established
with the slow setting.
609
EDHThis selects whether to
superimpose EDH onto the SDI
output signals.
0000 OFF : 
EDH is not superimposed.
0001ON:EDH is superimposed.
610
PB/PR IN LV
(For AJ-SD93P)
This selects the analog component
input level.
0000 M :M level
0001
B-CAM:ß-CAM level
614
PB/PR OUT
LV
(For AJ-SD93P)
This selects the analog component
output level.
0000 M :M level
0001
B-CAM:ß-CAM level
No./Item Description
YA94G
YA94GThis appears only when the optional board
AJ-YA93P has been installed.
This appears only when the optional board 
AJ-YA94G has been installed.
YA93P622
SETUP 25
(For AJ-SD93P)
For setting 7.5% setup processing
to be performed on input and output
signals in the DVCPRO (25 Mbps)
mode.
When the STOP button is pressed,
operation is transferred to the sub-
screen, and the setup level is set for
each output. To return from the sub-
screen, press the STOP button again.
00
CMPST INThis selects the 7.5% setup processing
for the input composite signal.
0000    THRU : 
The signal is recorded in its original
form.
0001CUT:
The signal is recorded with the
7.5% setup removed.
01
CMPST OUT
This selects the 7.5% setup processing
for the output composite signal.
0000    THRU : 
The signal is output in its original
form.
0001ADD:
The signal is output with the 7.5%
setup added.
Note:
Bear in mind the setting for sub-screen
item No. 03 (CMPNT OUT) of setup
menu item No. 622 (SETUP 25).
02
CMPNT IN
This selects the 7.5% setup processing
for the input component signal.
0000THRU: 
The signal is recorded in its original
form.
0001 CUT :
The signal is recorded with the
7.5% setup removed.
03
CMPNT OUT
This selects the 7.5% setup processing
for the output composite, component
and serial (digital) signal.
0000THRU: 
The signal is output in its original
form.
0001 CUT :
The signal is output with the 7.5%
setup removed.
0002 ADD :
The signal is output with the 7.5%
setup added. Sub-screen
YA93P
YA93P
YA93P
YA93P
YA94G
YA93P
YA94G 
						

							– 29–
660
UMID RECThis selects whether or not to
record the UMID information on the
tape.
0000 OFF :
UMID information is not recorded on
the tape.
0001
ON:
UMID information is recorded on the
tape.
Note:
If 1394 has been selected as the input
signals using the INPUT SELECT
button, UMID will not be recorded even
when it is set to ON unless the input
signal can be detected.
Setup menus (continued)
624
CC REC
(For AJ-SD93P)
For selecting whether to record the
closed caption signals multiplexed
on the input signals on the tape.
0000
OFF:
No closed caption signal is recorded.
0001 ON :
When a closed caption signal is
detected from the selected input
signal, it can be recorded.
Note:
If 1394 signals have been selected as
the input signals using the INPUT
SELECT button, the closed caption
signals which have been multiplexed
onto the input signals will be recorded
on the tape regardless of the setting.
645
WIDE 
SELECT
This selects whether or not to record
the wide-screen information on the tape.
0001 WIDE :
The wide-screen information is not
recorded on the tape.
0002
NORMAL:
The wide-screen information is
recorded on the tape.
Note:
If 1394 has been selected as the input
signals using the INPUT SELECT
button, the wide-screen information on
the input signals will be recorded
regardless of this menu’s setting.
YA93P
YA94G 623
SETUP 50
(For AJ-SD93P)
For setting 7.5% setup processing
to be performed on input and output
signals in the DVCPRO50 (50 Mbps)
mode.
When the STOP button is pressed,
operation is transferred to the sub-
screen, and the setup level is set for
each output. To return from the sub-
screen, press the STOP button again. No./Item Description
00
CMPST INThis selects the 7.5% setup processing
for the input composite signal.
0000    THRU : 
The signal is recorded in its original
form.
0001CUT:
The signal is recorded with the
7.5% setup removed.
01
CMPST OUT
This selects the 7.5% setup processing
for the output composite signal.
0000    THRU : 
The signal is output in its original
form.
0001ADD:
The signal is output with the 7.5%
setup added.
Note:
Bear in mind the setting for sub-screen
item No. 03 (CMPNT OUT) of setup
menu item No. 623 (SETUP 50).
02
CMPNT IN
This selects the 7.5% setup processing
for the input component signal.
0000THRU: 
The signal is recorded in its original
form.
0001 CUT :
The signal is recorded with the
7.5% setup removed.
03
CMPNT OUT
This selects the 7.5% setup processing
for the output composite, component
and serial (digital) signal.
0000THRU: 
The signal is output in its original
form.
0001 CUT :
The signal is output with the 7.5%
setup removed.
0002 ADD :
The signal is output with the 7.5%
setup added. Sub-screenNo./Item Description
USER menu 
The underlined items indicates the initial setting.
YA94GThis appears only when the optional board
AJ-YA93P has been installed.
This appears only when the optional board 
AJ-YA94G has been installed.
YA93P
YA93P
YA93P
YA94G
YA93P
YA94G 
						

							– 30–
Setup menus (continued)
USER menu 
The underlined items indicates the initial setting.
No./Item Description
662
UMID POSThis sets the line on which the
UMID information is to be
superimposed.
Notes:
• The line selected for the setup menu
item No. 501 (VITC POS-1) and No.
502 (VITC POS-2) settings cannot be
selected for this item.
• The default settings are not restored
even if the RESET button is pressed
while holding down the SEARCH
button.
(For AJ-SD93E)
0000 BLANK
0001 8L
::
0010
17L
::
0015 22L
(For AJ-SD93P)
0000 BLANK
0001 12L
::
0006
17L
::
0008 19L
No./Item Description
USER menu 
701
CH1 IN LVThis selects the audio input (CH1)
reference level switching.
0000 4dB
0001
0dB
0002–20dB
702
CH2 IN LVThis selects the audio input (CH2)
reference level switching.
0000 4dB
0001
0dB
0002–20dB
703
CH3 IN LVThis selects the audio input (CH3)
reference level switching.
0000 4dB
0001
0dB
0002–20dB
704
CH4 IN LVThis selects the audio input (CH4)
reference level switching.
0000 4dB
0001
0dB
0002–20dB
706
CH1 OUT LVThis selects the audio output (CH1)
reference level switching.
0000 4dB
0001
0dB
0002–20dB
707
CH2 OUT LVThis selects the audio output (CH2)
reference level switching.
0000 4dB
0001
0dB
0002–20dB
708
CH3 OUT LVThis selects the audio output (CH3)
reference level switching.
0000 4dB
0001
0dB
0002–20dB
709
CH4 OUT LVThis selects the audio output (CH4)
reference level switching.
0000 4dB
0001
0dB
0002–20dB
YA93P
YA94G 661
UMID GEN
This selects the basic UMID
information to be recorded on the
tape when ON has been selected as
the setup menu item No. 660 (UMID
REC) setting.
0000 INT :
Newly created basic UMID
information of this unit is always
recorded.
0001
EXT:
The basic UMID information of the
input signals is recorded.
Newly created basic UMID
information of this unit is recorded if
there is no basic UMID information
on the input signals.
Note:
The source pack (of the UMID
information) of the input signal will be
recorded on the tape, regardless of
this menu’s setting.
YA94GThis appears only when the optional board
AJ-YA93P has been installed.
This appears only when the optional board 
AJ-YA94G has been installed.
YA93P
YA93P
YA93P
YA93P
YA93P
YA93P
YA93P
YA93P