Panasonic Aj Pcd10p Operating Instructions Manual

Memory Card Drive
Model No. AJ-
P
E
AJ-PCD10
Connect the Memory Card Drive to a personal computer before installing
the P2 driver to the computer from the installation CD. 
For details, refer to the Installation Manual.
Before operating this product, please read the instructions carefully and save this
manual for future use.
Operating Instructions
AJ-PCD10_en.book  1 ページ  ２００４年６月２３日　水曜日　午後１時５３分 

2
Table of Contents
Precautions for Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Overview  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
Parts and their Functions . . . . . . . . . . . . . . . ....

3
Precautions for Use
Caution for AC Mains Lead
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This product is equipped with 2 types of AC mains cable.  One is for continental Europe, etc. and the other one
is only for U.K.
Appropriate mains cable must be used in each local area, since the other type of mains cable is not suitable.
FOR CONTINENTAL EUROPE, ETC.
Not to be used in the U.K.FOR U.K. ONLY
If the plug supplied is not suitable for your
socket outlet, it should be cut off and...

4
CAUTION:
TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING
INTERFERENCE, USE THE RECOMENNDED ACCESARRIES ONLY.
WARNING:
zTO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
zTO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, KEEP THIS
EQUIPMENT AWAY FROM ALL LIQUIDS-USE AND STORE ONLY IN
LOCATIONS WHICH ARE NOT EXPOSED TO THE RISK OF DRIPPING
OR SPLASHING LIQUIDS, AND DO NOT PLACE ANY LIQUID
CONTAINERS ON TOP OF THE EQUIPMENT.
CAUTION:
THE AC OUTLET (MAINS...

5  indicates safety information.
CAUTION:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is...

6
Overview
The AJ-PCD10 (hereinafter referred to as “P2 drive”) is a data transfer device that uses a
USB 2.0 interface and is designed only for AJ-P2C series memory cards (hereinafter
referred to as “P2 card(s)”).
The P2 drive enables high-speed transfer to a personal computer of clip data shot with a P2
card camera-recorder.
This device supports not only the transferring and copying of clips recorded on P2 cards, but
also direct editing.
Features
zThe P2 drive features five card slots.
zIt enables...

7
Parts and their Functions
Front Panel
(1) Power Indicator
This indicator lights up in green when
the P2 drive is running.
(2) Status Indicator
This indicator lights up in green during
access to a P2 card.

Removing a P2 card during access
may cause file corruption.
(3) Card Slots
The P2 drive’s card slots are designed
for P2 cards.
Proper operation cannot be
guaranteed when used with any card
other than P2 cards.
(4) EJECT Button
To remove a P2 card, press this button
so that the button pops out, then...

8
Inserting a P2 Card
When inserting a P2 card into the slot in the
P2 drive, make sure you keep the card
horizontal as you ease it in.
Forcing the card in on an angle may cause
a problem.
Write-protection of P2 Card
A P2 card has a write-protect switch.
Setting this switch to “PROTECT” can
prevent writing and deleting of data.
Note: The write-protect switch is not
effective when the P2 card is inserted in the
P2 drive. Make sure you remove the P2
card from the P2 drive, set the switch, then
re-insert...

9
To Connect the P2 drive to a Personal Computer for External
Use
1Attach the rubber feet to the dimples
on the base of the P2 drive.
2Start the personal computer.
3Plug the AC adapter supplied with the
P2 drive into the DC IN 16 socket on
the P2 drive.
The P2 drive will start.
4Plug a USB 2.0 cable B connector into
the USB connector on the P2 drive.
No USB 2.0 cable is supplied with the P2
drive in the package. Use a commercially
available USB 2.0 cable (shielded).
Take care to use a USB cable that is...

10
To Mount the P2 drive in a Personal Computer 5-inch Bay
1Turn OFF the personal computer’s
power.
2Undo the six screws and remove the
cover.
3Mount the P2 drive in a 5-inch bay on
the personal computer. Use the
screws supplied with the P2 drive for
mounting.
Please refer to your computer’s
instruction manual for guidance in
mounting to 5-inch bay drives.
4Plug the USB 2.0 cable B connector
into the USB 2.0 connector on the P2
drive, then plug the A connector into
the USB 2.0 port on the motherboard
of...