Panasonic Aj Hdr150 Operating Instructions Manual

11
Parts and Their Functions
The following panels change depending on their
combination.
?
SDTI panel (packed with optional board)
Nothing is connected to the SDTI panel.
@
Analog panel (packed with optional board)
This is provided with analog audio signal input and
output connectors.
A
Analog out panel (packed with optional board)
This is provided with analog audio signal output
connectors.
B
SDI panel  (packed with optional board)
This is provided with analog video signal output and
analog audio signal...

12
Rack Mounting
Using the rack-mounting adapters provided, the unit can be mounted in a 19-inch standard rack.  The following
slide rails and brackets are recommended for mounting.
OSlide rails (CC3001-99-0191), brackets (B-308): made by CHASIS TRAK
For details, consult your dealer.
1. Remove the four feet from the bottom of the unit.
OTake care to safeguard the unit from vibration and
impact.
2. Attach the inner members of the slide rails to the
unit.
3. Attach the outer members of the slide rails and...

13
ANALOG/DIGITAL REMOTE IN
SIGNAL
GND
BA
C
H
1
C
H
2
C
H
3
C
H
4
SDI/SDTI INOUT OUT
VIDEO IN
SDI/SDTI INOUT OUT
VIDEO IN
SDI/SDTI INOUT
OUT
VIDEO IN
SDI/SDTI INOUT OUT
VIDEO IN
~ AC IN
FUSE F2 125V 10A
~ AC IN
FUSE F1 125V 10A
AUDIO IN AUDIO OUT VIDEO OUT
AJ-D850
VIDEO IN
REF VIDEO  IN
CONTROLLER
REFERENCE
VIDEO
Fibre Channel
Cable
1. Analog
When all the connections have been made to the
analog I/O board
Connections

No sound will be heard when a tape is played back at less than normal (1a
) speed with...

14
ANALOG/DIGITAL REMOTE IN
SIGNAL
GND
BA
C
H
1
C
H
2
C
H
3
C
H
4
SDI/SDTI INOUT OUT
VIDEO IN
SDI/SDTI INOUT OUT
VIDEO IN
SDI/SDTI INOUT
OUT
VIDEO IN
SDI/SDTI INOUT OUT
VIDEO IN
~ AC IN
FUSE F2 125V 10A
~ AC IN
FUSE F1 125V 10A
SDTI OUT
AJ-D780
AJ-D780
SDTI IN REF VIDEO  IN
REF VIDEO  IN
CONTROLLER
REFERENCE
VIDEO
Fibre Channel
Cable
2. SDTI
When all the connections have been made to the
SDTI I/O board
Connections

No sound will be heard when a tape is played back at less than normal (1a
) speed with...

15
ANALOG/DIGITAL REMOTE IN
SIGNAL
GND
BA
C
H
1
C
H
2
C
H
3
C
H
4
SDI/SDTI INOUT OUT
VIDEO IN
SDI/SDTI INOUT OUT
VIDEO IN
SDI/SDTI INOUT
OUT
VIDEO IN
SDI/SDTI INOUT OUT
VIDEO IN
~ AC IN
FUSE F2 125V 10A
~ AC IN
FUSE F1 125V 10A
AUDIO OUT
SDI OUT
VIDEO OUT
AJ-D850
SDI IN
REF VIDEO  IN
CONTROLLER
Monitor Speakers with
built-in amplifierREFERENCE
VIDEO
Fibre Channel
Cable
3. SDI
When all the connections have been made to the
SDI I/O board
Connections

No sound will be heard when a tape is played back at...

16
$System Start Up 
Follow the steps outlined below to start up the system. 
1. Install the optional board. (See page 31.) 
2. Install the HDD for data. (See page 36.) 
3. Connect the FC cable between the Fibre Channel
connectors [RAID] and [HOST]. 
4. Connect power cord and signal line. 
Connect the power cord to AC power socket for the
power supply unit installed. 
5. Turn the POWER switch on the front panel to ON. 
When the power switch is set to ON, the power
supply LED above the switch lights.
6....

17
Display Panel
$Display panel screen flowchart 
[SET] [F5]
[F5]
[F5]
[CANCEL]
[F5] [F5]
[F5]
F
HDD status display
[F5]
[F3]
[F4] [F1]
[F2]
H
Error log display
=
CLIP display
>
CLIP erase
[F3] [F1]
?
CLIP rename[SET] or
[CANCEL][SET] or
[CANCEL]
[F1]
E
CLIP creation
[SET] or
[CANCEL] A
Simplified manual
operation 2
[F1]
[4
]
D
CLIP load [3
][F5] @
Simplified manual operation 1
1
Startup
2
Main 1
[F5]
[3
] [4
]
3
Main 2
[3
] [4
]
4
Main 3
5
Menu selection 1
[3
] [4
]
6
Menu selection 2
[CANCEL] [F1]
7...

18
$Main Screen
Displays the status of the channel selected with the
channel button. 
The main screen has 3 patterns, and its display can
be switched by cursor button [
#]  or [
2]. 
After moving to a screen other than main screen, the
main screen returns to pattern 1. 
Function buttons using the [CANCEL] button can only
be operated on the main screen alone.
(On the main screen, operation can be implemented
in any pattern.)
Display Panel
C CH
H1
1 
 C
CL
LI
IP
P0
00
00
01
1 
 0
00
0:
:0
00
0:
:0
00
0:...

19
Display Panel 
Main Screen Pattern 1
6
Board type display
Shown is the type of input/output board
corresponding to the channel currently displayed. 
NO BOARD: Board is not inserted.
SDTI I/O: SDTI input/output board
ANALOG OUT: Analog output board
SDI I/O: SDI input/output board
ANALOG I/O: Analog input/output board
7
DF display 
Displays DF/NDF setting. 
-DF-: Drop frame mode
-NDF-: Non drop frame mode 
:
Next pattern display 
Shows that there is a screen pattern to display.
When cursor button [
2]...

20
$Menu Selection Screen 
This is the screen for selecting each type of menu.
Menus are displayed in the lower register of the main
screen. 
Each screen can be called up by selecting a function
button. 
Adjacent patterns can be shown by using cursor
button [
#] or [
2].
Display Panel
C CH
H1
1 
 C
CL
LI
IP
P0
00
00
01
1 
 0
00
0:
:0
00
0:
:0
00
0:
:0
00
0 
 (
(C
CT
TL
L1
1)
) 
  
 R
RE
EW
W
F F1
1:
:C
CL
LI
IP
P 
 F
F2
2:
:M
MA
AN
NU
U 
 F
F3
3:
:H
HD
DD
D 
  
 F
F4
4:
:L
LO
OG
G 
  
 F
F5
5:
:M
MA
AI...