Panasonic Aj Hdc20a Operating Instructions Manual

81
HIGH SETTING screen
The high level gain is set on this screen.
ItemVariable
rangeRemarks
MASTER GAIN–3dB
:
12dB
:
30dB
VF
display
USER
ENG–3 dB, 0 dB, 3 dB, 6 dB, 9
dB, 12 dB, 15 dB, 18 dB,
21 dB, 24 dB, 27 dB or 30
dB can be set.
H. DTL LEVEL 0
:
6
:
63
USER
ENGFor setting H.DTL (detail)
level.
V. DTL LEVEL 0
:
10
:
63
USER
ENGFor setting V.DTL (detail)
level.
DTL CORING 0
:
5
:
15
USER
ENGFor setting DTL coring.
H. DTL FREQ 0
:
2
:
29
USER
ENGFor selecting H.DTL
FREQUENCY.
LEVEL DEPEND 0
:
2
:
5...

82
Setting menu screens (CAM MAIN MENU 1)
SKIN TONE DTL screen
The skin tone detail of the camera is set on this
screen.
ItemVariable
rangeRemarks
SKIN TONE DTL ON
OFF
VF
display
USER
ENGFor setting the skin tone
detail to ON or OFF.
SKIN TONE
ZEBRAON
OFFUSER
ENGFor setting zebra in the
skin tone range to ON or
OFF.
At the “ON” setting, the
amount of detail in the
zebra viewing range is
varied.
SKIN DTL
CORING0
:
5
:
7
USER
ENGFor setting the detail
coring.
Y MAX 0
:
190
:
255
USER
ENGFor setting the...

83
Setting menu screens (CAM MAIN MENU 1)
GAMMA screen
The gamma settings of the camera are performed on
this screen.
ItemVariable
rangeRemarks
R GAMMA–15
:
+0
:
+15
VF
display
USER
ENGAmount by which the R
channel gamma is
corrected in respect of the
master gamma level.
B GAMMA–15
:
+0
:
+15
USER
ENGAmount by which the B
channel gamma is
corrected in respect of the
master gamma level.
The underlining in the variable range column indicates the setting in the preset mode.
CAMERA SETTING screen
The basic...

84
VF DISPLAY screen
The information to be displayed inside the viewfinder
is set on this screen.
ItemVariable
rangeRemarks
DISP
CONDITIONNORMAL
HOLD
VF
display
USER
ENGNORMAL:
The statuses are
displayed at all times.
HOLD:
The statuses are
displayed when MODE
CHECK SW is ON.
DISP MODE 1
2
3USER
ENG
VF OUTY
NAM
R
G
BUSER
ENGFor selecting VF OUT.
NAM (N Additive Mix): 
The signal with the highest
level among the R, G and
B signals is output.
VF DTL 0
:
4USER
ENGFor selecting VF DTL.
The detail of the...

85
VF INDICATOR screen
The information to be displayed inside the viewfinder
is set on this screen.
ItemVariable
rangeRemarks
EXTENDERON
OFF
VF
display
USER
ENGFor setting the extender
display to ON or OFF.
SHUTTERON
OFFUSER
ENGFor setting the shutter
speed display to ON or
OFF.
FILTERON
OFFUSER
ENGFor setting the filter No.
display to ON or OFF.
WHITEON
OFFUSER
ENGFor setting the AWB
PRE/A/B display to ON or
OFF.
GAINON
OFFUSER
ENGFor setting the currently
selected gain display to
ON or OFF.
IRIS...

86
SHUTTER SPEED screen
The shutter speed is set on this screen.
ItemVariable
rangeRemarks
SYNCHRO
SCANON
OFF
VF
display
ENG For setting the synchro
scan shutter speed.
SUPER V ON
OFFENG For setting the super V
mode (vertical high-
resolution mode).
1/100ON
OFFENG For switching the 1/100
shutter speed setting to
ON or OFF.
1/120ON
OFFENG For switching the 1/120
shutter speed setting to
ON or OFF.
1/250ON
OFFENG For switching the 1/250
shutter speed setting to
ON or OFF.
1/500ON
OFFENG For switching the...

87
CAMERA SW MODE screen
The modes of the camera switches are set on this
screen.
ItemVariable
rangeRemarks
FILTER INH ONOFF
VF
display
USER
ENGFor selecting whether or
not the data in the AWB
memories (channel A,
channel B) is to be held
for each filter.
ON:
Only the channel A and
channel B memories (2
memories) regardless of
the filter.
OFF:
The data is held for each
of the filters (4a
2 = 8
memories).
SHOCKLESS
AWBOFFNORMAL
SLOW
FASTUSER
ENGFor selecting the
SHOCKLESS AWB
setting.
“SHOCKLESS AWB”...

88
Setting menu screens (CAM MAIN MENU 3)
CAM CARD READ/WRITE screen
The settings for saving (writing) the menu data on the
setup card, loading (reading) the data from the card,
and configuring the card are performed on this screen.
ItemVariable
rangeRemarks
READ==VF
displayUSER
ENGFor loading the data from
the setup card.
SELECT1
:
8USER
ENGFor selecting the number
of the file to be loaded.
WRITE==USER
ENGFor saving the camera’s
data on the setup card.
SELECT1
:
8USER
ENGFor selecting the number
of the...

89
Setting menu screens (CAM MAIN MENU 3)
GENLOCK/IRIS screen
The genlock and iris control settings are performed on
this screen.
ItemVariable
rangeRemarksVF
display
H PHASE
COARSE0
:
7
:
15
USER
ENGFor coarsely adjusting the
H phase during genlock.
H PHASE FINE 0
:
32
:
64
USER
ENGFor finely adjusting the H
phase during genlock.
A. IRIS LEVEL 0
:
82
:
100
USER
ENGFor setting the auto iris
target level.
The brightness (iris) is
controlled using this value.
The higher the value
selected, the higher the...

90
Setting menu screens (CAM MAIN MENU 4)
CAM USER MENU SELECT 1, 2 and 3 screens
The settings for registering the items (the same as the ones on the CAM MAIN MENU 1, 2 and 3 screens)
allocated to the SUB menus to the SUB MENU screen are performed on this screen.
Registration ON (¢ ¢
) or OFF (≥
) is set at the head of each item.
Up to 42 camera unit items can be registered.
CAM USER MENU SELECT 1 screen
SUB menuVF
displayRemarks
ROPENG Index for opening the ROP screen.
LOW SETTINGENG Index for opening...