Panasonic Aj Hdc20a Operating Instructions Manual
Here you can view all the pages of manual Panasonic Aj Hdc20a Operating Instructions Manual. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 71
71 Menu operations User menu: Engineer menu Basic setting menu operations Displaying menus CAM USER MENUPress the MENU button.Press the MENU button. Press the JOG dial button. 1Press the MENU button. The camera unit’s USER menu screen is displayed. 2When the MENU button is pressed again, the VTR unit’s USER menu screen is displayed. 1Hold down the MENU button for at least 3 seconds. 2When the JOG dial button is pressed, the next MAIN menu screen (of the camera unit) is displayed. 3When the MENU button is...
Page 72
72 < ROP > nMASTER PED : +008 MASTER DTL : +00 MASTER GAMMA : 0.45 R GAIN : +000 G GAIN : +000 B GAIN : +000 R PEDESTAL : +000 G PEDESTAL : +000 B PEDESTAL : +000 Menu operations Operations common to the user menu and engineer menu Example: Displaying sub-menus and deciding on settings Turn the JOG dial button.I 1Turn the JOG dial button while the USER menu screen or MAIN menu screen is displayed. The cursor ( n) moves to the SUB menu item. 2Move the...
Page 73
73 Setting menu configuration CAM MAIN MENU 1 ROP MATRIX COLOR CORRECTION 1 COLOR CORRECTION 2 LOW SETTING MID SETTING HIGH SETTING ADDITIONAL DTL1 ADDITIONAL DTL2 MASTER PED MASTER DTL MASTER GAMMAR GAING GAINB GAINR PEDESTALG PEDESTALB PEDESTAL MATRIX TABLE MATRIX R-G MATRIX R-BMATRIX G-RMATRIX G-BMATRIX B-RMATRIX B-G R (SAT)/(PHASE) Mg (SAT)/(PHASE) B (SAT)/(PHASE)Cy (SAT)/(PHASE)G (SAT)/(PHASE)Yl (SAT)/(PHASE) R (SAT)/(PHASE) Mg (SAT)/(PHASE) B (SAT)/(PHASE)Cy (SAT)/(PHASE)G (SAT)/(PHASE)Yl...
Page 74
74 Setting menu configuration CAM MAIN MENU 2 VF DIAPLSY VF MARKER VF INDICATOR CAMERA ID SHUTTER SPEED ! LED CAMERA SW MODE SUPER GAIN DISP CONDITION DISP MODE VF OUTVF DTLZEBRA1 DETECTZEBRA2 DETECTZEBRA2LOW LIGHT LVL SAFETY ZONE CENTER MARK 4:3 MARK4:3 FRAME LVL EXTENDER SHUTTER FILTERWHITEGAINIRISCAMERA IDZOOM LVLCOLOR TEMP ID: ¢¢¢¢¢¢¢¢¢¢ SYNCHRO SCAN SUPER V 1/1001/1201/2501/5001/10001/2000 GAIN (0dB) GAIN (–3dB) SHUTTERWHITE PRESETEXTENDERFILTERSUPER VBLACK STRD4300K FILTER INH SHOCKLESS AWB COLOR...
Page 75
75 Setting menu configuration CAM MAIN MENU 4 CAM USER MENU SELECT1 CAM USER MENU SELECT2 BLACK SHADING FLARE INITIALIZE DIAGNOSTIC OPTION ROPLOW SETTINGMID SETTINGHIGH SETTINGADDITIONAL DTL1ADDITIONAL DTL2SKIN TONE DTLKNEE/LEVELGAMMACAMERA SETTING VF DISPLAY VF MARKER VF INDICATOR!LEDCAMERA SW MODESUPER GAIN CAM USER MENU SELECT3CAM CARD READ/WRITE CAM CARD R/W SELECT GENLOCK/IRISDETECTION CORRECT (DIG) CORRECT (ANA) WHITE SHADINGDETECTION (V SAW) CORRECT R FLARE G FLARE B FLARE COLORIMETRYMATRIX READ...
Page 76
76 Setting menu configuration VTR MAIN MENU FUNCTION BATTERY/TAPE VTR VF INDICATOR MIC AUDIO TIME DATE NEWS REC MODE HUMID OPE REC STARTPAUSE TIMERRETAKE MODEHD SDI OUTINTERVAL REC MODEINTERVAL REC TIMEINTERVAL PAUSE TIME BATTERY SELECT EXT DC IN SELECT BATT NEAR END ALARMBATT NEAR END CANCELBATT END ALARMBATT REMAIN FULLTAPE NEAR END ALARMTAPE NEAR END TIMETAPE END ALARMTAPE REMAIN/$BATTERY SETTINGAJ-BP490 AU-BP402 HP-30APRO14TRIM14TRIM13DIGITAL14DIGITAL13BP-H90BP-H100NP-L40NP-L40 DBP-L60/90NP-1B TAPE...
Page 77
77 Setting menu screens (CAM MENU) The main menu consists of CAM MAIN MENU (1 to 4) of the camera and the VTR MAIN MENU of the VTR. These screens are index screens which are used to open the sub-menus. The setting menu is operated with the MENU button and JOG dial button. (Refer to pages 70 to 72 for the menu operations.) CAM MAIN MENU 1 screen SUB menuVF displayRemarks ROPUSER ENGIndex for opening the ROP screen. MATRIXUSER ENGIndex for opening the MATRIX screen. COLOR CORRECTION1USER ENGIndex for...
Page 78
78 Setting menu screens (CAM MAIN MENU 1) ROP screen The ROP (Remote Operation Panel) is set on this screen. ItemVariable rangeRemarks MASTER PED–200 : +18 : +200 (Max.)VF display USER ENGMASTER PEDESTAL level setting. MASTER DTL–31 : +00 : +31 USER ENGH. DTL/V. DTL level setting. MASTER GAMMA0.35 : 0.45 : 0.75 USER ENGMASTER GAMMA setting. (0.01 step) Three different values can be stored for LOW, MID and HIGH in the memory. R GAIN–200 : +000 : +200 (Max.)USER ENGFor setting R channel gain. G GAIN–200 :...
Page 79
79 Setting menu screens (CAM MAIN MENU 1) COLOR CORRECTION 1 screen The camera color saturation adjustments and hue adjustments are set on this screen. ItemVariable rangeRemarks R (SAT) R (PHASE)–63 : +00 : +63 VF display USER ENGColor saturation adjustment and hue adjustment: red Mg (SAT) Mg (PHASE)–63 : +00 : +63 USER ENGColor saturation adjustment and hue adjustment: magenta B (SAT) B (PHASE)–63 : +00 : +63 USER ENGColor saturation adjustment and hue adjustment: blue Cy (SAT) Cy (PHASE)–63 : +00 :...
Page 80
80 Setting menu screens (CAM MAIN MENU 1) LOW SETTING screen The low level gain is set on this screen. ItemVariable rangeRemarks MASTER GAIN–3dB : 0dB : 30dB VF display USER ENG–3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 15 dB, 18 dB, 21 dB, 24 dB, 27 dB or 30 dB can be set. H. DTL LEVEL 0 : 6 : 63 USER ENGFor setting H.DTL (detail) level. V. DTL LEVEL 0 : 16 : 63 USER ENGFor setting V.DTL (detail) level. DTL CORING 0 : 2 : 15 USER ENGFor setting DTL coring. H. DTL FREQ 0 : 2 : 29 USER ENGFor selecting H.DTL...