Panasonic Aj Hd150 Operating Instructions Manual
Have a look at the manual Panasonic Aj Hd150 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 92
– 92 –
RS-232C interface
3) Return format [VTR → controller (PC)]
The following responses are made to the command. If necessary, more than one response is made.
When the communication has terminated normally
1. The receive completion message is returned.
[ACK]
06h
2. The execution completion message is returned.
[STX] [command] [data] [ETX]
02h XX XX XX XX-XX 03h
•[command]: This is the message (data) which is returned or the execution completion message identifier.
•[data]: This is the...](http://img.usermanuals.tech/thumb/58/67769/w64_aj-hd150_en_om_d-91.png "Page 92
– 92 –
RS-232C interface
3) Return format [VTR → controller (PC)]
The following responses are made to the command. If necessary, more than one response is made.
When the communication has terminated normally
1. The receive completion message is returned.
[ACK]
06h
2. The execution completion message is returned.
[STX] [command] [data] [ETX]
02h XX XX XX XX-XX 03h
•[command]: This is the message (data) which is returned or the execution completion message identifier.
•[data]: This is the...")
![Page 93
– 93 –
5. Command table
(1) Commands relating to operation control
•As for the return (completion) message, [ACK] is first returned when data is received, and the execution message is
subsequently returned. It is only the execution message which is listed in this table.
•In the case of commands not listed in the table, ER001 (invalid command) is returned after [ACK] has been returned.
VTR
operationSend commandReturn (completion)
messageSupplementary notes
[STX] OSP [ETX] STOP
[STX] OSP [ETX]This command...](http://img.usermanuals.tech/thumb/58/67769/w64_aj-hd150_en_om_d-92.png "Page 93
– 93 –
5. Command table
(1) Commands relating to operation control
•As for the return (completion) message, [ACK] is first returned when data is received, and the execution message is
subsequently returned. It is only the execution message which is listed in this table.
•In the case of commands not listed in the table, ER001 (invalid command) is returned after [ACK] has been returned.
VTR
operationSend commandReturn (completion)
messageSupplementary notes
[STX] OSP [ETX] STOP
[STX] OSP [ETX]This command...")
![Page 94
– 94 –
VTR
operationSend commandReturn (completion)
messageSupplementary notes
[STX] OBF [ETX] STANDBY
OFF[STX] OBF [ETX]This command is setting the VTR to standby OFF.
[STX] OSR:data [ETX] SHTL
REVERSE[STX] OSR [ETX]This is the reverse direction shuttle command.
data = n:
0:
1:
2:
3:
4:
5:
6:
7:
8:
9:
A:speed data
STILL
×0.03
×0.1
×0.2
×0.5
×1
×1.85
×4.1
×9.5
×16
×32: This speed differs according to the setting selected for
setup menu No. 101 (SHTL MAX).
: This speed differs according to the...](http://img.usermanuals.tech/thumb/58/67769/w64_aj-hd150_en_om_d-93.png "Page 94
– 94 –
VTR
operationSend commandReturn (completion)
messageSupplementary notes
[STX] OBF [ETX] STANDBY
OFF[STX] OBF [ETX]This command is setting the VTR to standby OFF.
[STX] OSR:data [ETX] SHTL
REVERSE[STX] OSR [ETX]This is the reverse direction shuttle command.
data = n:
0:
1:
2:
3:
4:
5:
6:
7:
8:
9:
A:speed data
STILL
×0.03
×0.1
×0.2
×0.5
×1
×1.85
×4.1
×9.5
×16
×32: This speed differs according to the setting selected for
setup menu No. 101 (SHTL MAX).
: This speed differs according to the...")
![Page 95
– 95 –
(2) Commands relating to inquiries
•As for the return (completion) message, [ACK] is first returned when data is received, and the execution message is
subsequently returned. It is only the execution message which is listed in this table.
•In the case of commands not listed in the table, ER001 (invalid command) is returned after [ACK] has been returned.
VTR
operationSend commandReturn (completion)
messageSupplementary notes
[STX] QCD [ETX] CTL/TC
DATA
REQUEST
[STX] CD data [ETX]This command is...](http://img.usermanuals.tech/thumb/58/67769/w64_aj-hd150_en_om_d-94.png "Page 95
– 95 –
(2) Commands relating to inquiries
•As for the return (completion) message, [ACK] is first returned when data is received, and the execution message is
subsequently returned. It is only the execution message which is listed in this table.
•In the case of commands not listed in the table, ER001 (invalid command) is returned after [ACK] has been returned.
VTR
operationSend commandReturn (completion)
messageSupplementary notes
[STX] QCD [ETX] CTL/TC
DATA
REQUEST
[STX] CD data [ETX]This command is...")
Printed in Japan VQT8432F0300H1040-100@P PANASONIC BROADCAST & DIGITAL SYSTEMS COMPANY DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 EASTERN ZONE One Panasonic Way 4E-7, Secaucus, NJ 07094 (201)348-7621 Mid-Atlantic/New England: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338-6835 Central Region: 1707 N Randall Road E1-C-1, Elgin, IL 60123 (847) 468-5200 WESTERN ZONE: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 Dallas Region: 6226 Abington Way, Houston, TX 77008 (713) 802-2726 No. CA/Northwest Region: 5870 Stoneridge, #3, Pleasanton, CA 94588 (925) 416-5108 Government Marketing Department: 52 West Gude Drive, Rockville, MD 20850 (301) 738-3840 PARTS INFORMATION & ORDERING: 9:00 a.m. – 5:00 p.m. (EST) (800) 334-4881/24 Hr. Fax (800) 334-4880 TECHNICAL INFORMATION: Emergency 24 Hour Parts & Service (800) 222-0741 TRAINING INFORMATION: Digital System Products - (201) 392-6852 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010 Panasonic de Mexico S.A. de C.V. Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico, D.F. (52) 1 951 2127