Panasonic Aj D750_200dpi Operating Instructions Manual

PREROLL button
This is used for feeding and cueing the tape for manual editing.
When it is pressed, the tape travels to the preroll point where it stops.
The preroll time can be set on-screen.
When this button is pressed together with the IN or OUT button, the tape can be cued to
the IN or OUT point entered.
When the AUDIO ENTRY on the setup menu No.311 is set to 1, IN point has been
entered at the point where the PREROLL button is pressed even if the IN point has not
been entered.
AUTO EDIT button...

Controls and their functions (continued)

Time code buttons
These are used to set the TC or UB value.
SHIFT:When setting the TC or UB value, first press this button to stop the data
running.
Change the digit now flashing on the display.
Each time the button is pressed, the flashing moves to the right by one digit,
and when it reaches the right-most digit, it returns to the left-most digit.
When it is kept depressed, the flashing moves consecutively.
ADJ:This is used to change the numeral of the digit now...

Volume control
This is used to adjust the headphones volume and the monitor output volume.
Whether the headphones output and monitor output volumes are to be linked or kept
separate can be set on-screen menu. (Note that the headphones output volume is
normally linked.)
When the volumes are kept separate, the monitor output is set to the unity value (preset
value).
MONITOR SELECT switches
These are used to select the audio signals output to the monitor L/R channels.
Each time the “L” button is pressed,...

Controls and their functions (continued)

ENCODER CONTROL switch
This selects whether the adjustments to the video output signals are to be performed by
the unit or by an external encoder/remote controller.
REMOTE: The adjustments to the video output signals are performed by the external
encoder/remote controller.
LOCAL:The adjustments to the video output signals are performed by the unit.
VIDEO LEVEL control and switch
When the ENCODER CONTROL switch is at LOCAL, the video level can be adjusted.
When it...

REC INHIBIT switch
This selects whether to enable or inhibit the recording on the cassette tape.
ON:The recording on the cassette tape is inhibited.
The REC INHIBIT lamp on the front panel now lights.
OFF: The recording on the cassette tape is enabled provided that the cassette’s
accidental erasure prevention mechanism has been set to the recording enable
position.
MENU button
When this is pressed, the on-screen menu appears on the TV monitor using VIDEO OUT
3 connector, and the setup menu No. appears...

Controls and their functions
Connector area
-16- 

Controls and their functions (continued)

ANALOG COMPONENT VIDEO OUT connector
The analog component video signal is output from this connector.
ANALOG COMPOSITE VIDEO OUT connectors
The analog composite video signals are output from these connectors.
The video signal with signals superimposed on it can be output from the VIDEO OUT3
connector.
The superimpose function can be set ON or OFF on the setup menu No. 006 (SUPER).
DIGITAL AUDIO IN/OUT connector
This I/O connector is for digital audio signals...

Connections when one unit is used
Set the CONTROL switch on the front panel to LOCAL.
Analog video input
(component) connectors
Analog audio input connectors
Reference input connectors
Digital audio/video
input connector.
(option)
Analog audio output
connectorsDigital audio
input connector
Digital audio/video output
connectors (option)
Active through output
connector (option)
Audio monitor
output connectorsDigital audio output
connector
Video monitor output connectors
(composite × 3, component)
-19- 

Connections when 2 units are used (deck to deck)
Source machine:Set the CONTROL switch on the front panel to REMOTE.
Recorder:Set the CONTROL switch on the front panel to LOCAL.
ReferenceSignal
generator
Source machineOFF
Remote control signal (9P)
Recorder
ON
To audio monitorTo videoTo audio monitorTo video
device
monitor devicedevicemonitor
device
Digital video/audio signal (option)
(Digital audio)
Analog video signal (component)
-20-