Panasonic Aj D700 Operating Instructions Manual

LENS ADJ Screen
This page performs the lens adjustments. The ON/OFF status for each item is indicated by displaying an asterix (*) or period (.)
in front of the item on the screen.
– LENS ADJ –
*F2.8 ADJItemVariable VF
rangedisplayRemarks
*F16 ADJF2.8 ADJENGVoltage is output only when selected by
the cursor (arrow).
F16 ADJ
ENGVoltage is output only when selected by
the cursor (arrow).

*: ON
·: OFF
When using a lens which allows the lens iris open or close end to be adjusted, set
either “F2.8 ADJ” or...

Setting Menu Screens
MENU SELECT 2/3 Screen
This page performs the menu page display ON/OFF settings. The ON/OFF status for each item is indicated by displaying an
asterix (*) or period (.) in front of the item on the screen.
– MENU SELECT 2/3 –Item
.FUNCTION1/5
.FUNCTION 2/5FUNCTION 1/5.FUNCTION3/5
.FUNCTION4/5
.FUNCTION5/5
.TIME/DATE
FUNCTION2/5
.LOW SETTING
.MID SETTING
.HIGH SETTING
FUNCTION 3/5
*: ONFUNCTION 4/5
·: OFF
FUNCTION 5/5
TIME/DATE
LOW SETTING
MID SETTING
HIGH SETTING
Variable
range
ON...

MENU SELECT 3/3 Screen
This page performs the menu page display ON/OFF settings. The ON/OFF status for each item is indicated by displaying an
asterix (*) or period (.) in front of the item on the screen.
– MENU SELECT 3/3 –Item
.LEVEL 1/6
.LEVEL 2/6LEVEL 1/6.LEVEL 3/6
.LEVEL 4/6
.LEVEL 5/6 .LEVEL 6/6
LEVEL 2/6
.VF OPERATION.LENS ADJ
LEVEL 3/6
*: ONLEVEL 4/6
·: OFF
LEVEL 5/6
LEVEL 6/6
VF OPERATION
LENS ADJ
Variable
range
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
VF
display
ENG
ENG
ENG
ENG...

AUTO SHADING Screen
Setting Menu Screens 

If trouble is detected immediately after the power is turned on or durin\
g operation, the display window (LCD), WARNING lamp,
Warning System 

Warning System 

Error Codes
When an error occurs in the unit for some reason or other, the following error codes appear in the
display window.
ContentsCode
No.
8
9
A
B
C
D
E
F
Solenoid trouble
The servo is not locked.
Condensation has occurred.
Supply reel trouble
Take-up reel trouble
Capstan trouble
Cylinder trouble
Loading trouble
Maintenance
Condensation
If the unit is moved from a cold location to a warm location or used in areas with high humidity, the
moisture in the air may adhere as water droplets on the head...

Maintenance
Cleaning the Video Heads
Use the AJ-CL12MP cleaning cassette when head cleaning is required. Improper use of the
cleaning cassette may damage the video heads. Therefore, read the Handling Instructions for the
cleaning tape carefully before use.
Cleaning the Viewfinder
Do not use thinner or other solvents to remove dirt from the viewfinder.
Wipe the lens with lens cleaner available on the market.
Absolutely do not wipe the mirror. If dirt, etc. has adhered to the mirror, remove it using a air...

Inspections Before Shooting
Perform the following inspections before shooting to check that all systems are operating properly.
Checking the image with a color monitor is recommended.
Inspection Preparations
2
1
3
4
2
1Insert a charged battery pack.
2Set the POWER switch to ON and check that the HUMID display does not appear and that
five or more bars of the remaining battery level display are lighted.
If the HUMID display appears, wait until the display goes off.
If five or more bars of the remaining...

Inspections Before Shooting
Inspecting the Viewfinder
1
2
3
4
5
6
7
8
9
Adjust the position of the viewfinder.
Check that the color bar appears on the viewfinder screen, and then adjust the BRIGHT,
CONTRAST and PEAKING controls so that the color bar appears clearly on the viewfinder.
Check the following items.
(1) Set the MENU SET/OFF switch to SET and check that the setting menu appears on the
viewfinder screen.
(2)Press the PAGE button and check that the setting menu page changes.
(3)Press the...