Panasonic Administrator Console Wj Nd300 Operating Instructions

							21
Create a Setup File Newly
Screenshot 1
Operate using the buttons on the tool bar on the opera-
tion window.
Step 1
Click the [New] button on the tool bar.
Screenshot 2
The version selection window will be displayed.
Step 2
Select the version of the WJ-ND300 currently in use.
Step 3
Click the [OK] button.
A new setup file will be created and the top page of the
operation window will be displayed. Create a setup file newly as follows. The default setting values will be applied for a newly created setup file.
Important:
When creating a new setup file while the other setup file is being edited, the following window will be displayed.
When the [Yes] button is clicked, the newly opened
setup file will overwrite the setup file currently being edit-
ed (with the default setting values).
When the file currently being edited is to be saved, click
the [No] button to cancel creation of a new setup file.
Save the edited setup file first and then create a new
setup file. 
						

							Convert the Version of the Setup File Format
Screenshot 1
Operate using the buttons on the tool bar on the opera-
tion window.
Step 1
Click the [Version conversion] button on the tool bar. It is possible to convert the version of the setup file format.
Version conversion is available only when the version of the WJ-ND300 in use is 2.xx.
Screenshot 2
The version conversion window will be displayed.
Step 2
Select Upgrade.
Step 3
Click the [OK] button.
Screenshot 3
The confirmation window will be displayed.
Step 4
Click the [Yes] button.
Version conversion will start.
Screenshot 4
When version conversion is completed, the following
window will be displayed.
Step 5
Click the [OK] button.
22 
						

							23
Change the Password
Screenshot 1
Operate using the buttons on the tool bar on the opera-
tion window.
Step 1
Click the [Password] button on the tool bar. Change the login password as follows.
Screenshot 2
The Change Password window will be displayed.
Step 2
Enter the current password in the Old Password (O)
box.
Step 3
Enter the desired password to be used as a new pass-
word in the New Password (N) box.
Enter up to 8 alphanumeric characters.
Step 4
Enter the new password in the Confirm New Password
(C) box for confirmation.
Screenshot 3
When the password is changed successfully, the follow-
ing window will be displayed.
Step 5
Click the [OK] button.
Step 6
Click the [OK] button on the displayed confirmation win-
dow. 
						

							24
Incorrect password. The entered Administrator Password of the network disk
recorder is incorrect. Enter the correct Administrator Password. File error. Check whether the write protection is applied for the folder in
which this software is to be installed or not. Check also the
available disk space. If this error occurs continuously, restart
this software.
Upgrade the setup menu of the WJ-ND300 to
version 2.0 or later.
Since WJ-ND300 series differs from the version
of a setup under edit, it cannot upload.The setup file whose version is 2.xx is about to be uploaded to
the WJ-ND300 whose setup menu version is 3.xx, or vice
versa. The setup file is about to be uploaded/downloaded to the WJ-
ND300 whose setup menu version is older than version 2.0.
Upgrade the setup menu of the WJ-ND300 to version 2.0 or
later.
Cannot open setup file.
Cannot open setup file. 
(Incorrect type (NTSC/PAL).)It is impossible to open the file because the file is corrupted.
It is impossible to open a file of this type since the television
system (NTSC/PAL) is different.
When opening a file
Message Cause
Error Messages
Cannot load language data.(Label.txt is dam-
aged.) Will show in English text.
Starting failure. The registry value may be
changed. Please reinstall.The initial display setup file is broken. The broken part of the
file will be displayed in English. Re-install this software to fix
this problem.
It may be possible that the registry values have been changed.
Re-install this software to fix this problem.
At startup
Communication error. It may be possible that the entered address is incorrect, con-
nection to the network disk recorder has been disconnected, or
no reply from the network disk recorder. Check if the entered
address is correct or not. If the entered address is correct,
check the connection of the network disk recorder. If it is possi-
ble to monitor live images using a web browser, it may be pos-
sible that timeout has occurred because the processing perfor-
mance of the recorder has temporarily slipped. Check if alarm
signals are being supplied continuously or not, and retry
uploading. 
Memory error. Processing failed because of memory shortage. Close other
applications and retry. If it fails again, restart the PC.
When downloading/uploading
Message Cause Message Cause 
						

							25
•Is the same IP address provided to other devices?
Refer to a system administrator for further informa-
tion. •Are you accessing the wrong IP address?
Check the connection as follows:
>ping IP address of this unit
If there is a reply from this unit, the connection is nor-
mal.
If not, check the settings of the IP address and the
subnet mask. •Is the valid IP address set?
Refer to a system administrator for further informa-
tion. •Is the connection indicator of the 10/100BASE-T port
lit? When it is not lit, connection to a LAN is not estab-
lished or a network is not working correctly. Confirm
that the connection indicator of the 10/100BASE-T
port is lit. Refer to a system administrator if it is not lit. 
Reference 
pages Cause/solution
•Is the Ethernet cable firmly connected to the 10/100
BASE-T port? Confirm the cable is firmly connected.–
Troubleshooting
Before asking for repairs, check the symptoms with the following table. 
Contact your dealer if a problem cannot be solved even after checking and trying the solution or a problem is not
described below, and when having a problem with installations.
Symptom
Cannot access from this
software.
–
Operating
Instructions/
Setup
Instructions
–
Operating
Instructions/
Setup
Instructions
•Are there contradictions between the address and the
network subnet to be accessed? 
Or is Use Proxy Server for the settings of the brows-
er checked?
When accessing this unit in the same subnet, entering
the address of this unit in the Don’t Use Proxy For
These Addresses box is recommended. Operating
Instructions/
Setup
Instructions 
						

							26
6, 723
Cannot login.
The installer started up at
startup of this software, or
the message window saying
that it is necessary to re-
install this software was dis-
played. 
Reference 
pages Cause/solutionSymptom
•Are the correct password entered? 
Confirm the correct password.
•It may be possible that the initial setup files have been
removed, edited, or moved from their original directo-
ry path.
Re-install this software following the displayed instruc-
tions, or re-install after uninstalling the software. 
						

							For U.S., Canadian and Puerto Rican fields:
Panasonic System Solutions Company, 
Unit Company of Panasonic Corporation of North America
Security Systems
www.panasonic.com/security
For customer support, call 1.877.733.3689
Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey 07094
Zone Office
Eastern: Three Panasonic Way, Secaucus, New Jersey 07094
Central: 1707 N. Randal Road, Elgin, IL 60123
Southern: 1225 Northbrook Parkway, Suwanee, GA 30024
Western: 6550 Katella Ave., Cypress, CA 90630
Panasonic Canada Inc.5770 Ambler Drive,Mississauga, 
Ontario, L4W 2T3 Canada (905)624-5010
http://www.panasonic.ca
Panasonic Sales Company
Division of Panasonic Puerto Rico Inc.
San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina
P.R. 00985(809)750-4300
© 2006 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. N0106-2066 V8QB6425CN       Printed in Japan
For European and other fields:
Matsushita Electric Industrial Co., Ltd.
Osaka, Japan
http://panasonic.net/