Panasonic Administrator Console Wj Nd300 Operating Instructions

							Special Days Operable Operable Time Table Operable Operable
Program Operable Operable Schedule
Basic Setup Operable Operable
Terminal Setup Operable Operable
Site Alarm Setup Operable Operable
Command Alarm Setup Operable Operable Event
11
Setting Items
The following setting items can be operated using this software.
The tables below show the available setting items when using this software and when using a web browser respec-
tively.
Refer to the Setup Instructions (PDF) of the network disk recorder.
Quick Setup Menu
Settings menu Settings menu
Display Setup
Camera SetupThis software
Only the settings relating to time &
date is operable.
It is impossible to set the clock.
Operable
It is impossible to perform the set-
tings of the connected cameras.Web browser
Operable
Operable
Rec & Event Setup
Network SetupOperable
OperableOperable
Operable
This software Web browser
System
Basic Setup Operable Operable
Time & Date Only the settings relating to time &
date is operable.
It is impossible to set the clock.Operable
Recording
REC Setup Operable Operable
Emergency REC Operable Operable
Advanced Setup Menu 
						

							Administrator Edit and User
Edit/Delete are operable on the
User Regist. window. User Mng.
Basic Setup
Host Regist.
User LevelOperable
Operable
Host Edit/Delete is operable on the
Host Regist. window.
OperableOperable
Operable
Operable User Regist. Operable Operable
FTP Setup Operable Operable
Mail Setup Operable Operable
Panasonic Alarm Protocol Operable Operable
Comm
Basic Setup Operable Operable
DNS Setup Operable Operable
DDNS Setup Operable Operable
Proxy Setup Operable Operable
SNMP Setup Operable Operable
NTP Setup Operable Operable
12
Camera
NW Camera Setup Operable
It is impossible to perform the set-
tings of the connected cameras.Operable
Group Setup Operable Operable
Sequence Setup Operable Operable
Settings menu This software Web browser 
						

							13
Data Delete
Save/LoadOnly HDD Auto Delete is operable.
It is impossible to delete data in the
recording area manually.
Not operableOperable
Operable
Config Not operable Operable Partition Information Not operable Not operable
Network Information Not operable Not operable
Disk End Mode
HDD Capacity WarningOperable
OperableOperable
Operable
Maintenance
Product Information Operable
Temperature inside the unit will
not be displayed.Operable
Disk Information Only Warning for Disk Life Time is
operable.
It is impossible to display informa-
tion of HDD such as available disk
space of the built-in HDD or HDD of
the extension unit.Operable
Settings menu This software Web browser 
						

							14
Screenshot 1
Operate using the buttons on the tool bar on the opera-
tion window.
Step 1
Click the [Download] button on the tool bar.
Download the Setting Values
It is also possible to download the setting values and save it as a setup file.
Important:
•It is impossible to download the setting values while starting up the network disk recorder or during performing
the system check of the network disk recorder.
•When trying to download the setting values, entering the Administrator password of the administrator of the net-
work disk recorder will be required. Refer to the Setup Instructions (PDF) for further information.
Screenshot 2
The Download window will be displayed.
Step 2
Enter the address of the network disk recorder from
which the setting values are to be downloaded.
Step 3
Enter the HTTP port number of the network disk
recorder.
Step 4
Enter the Administrator password of the network disk
recorder.
Step 5
When using a proxy server, check the Use a Proxy
Server checkbox and enter the address and the port
number.
Step 6
Click the [OK] button after completing the settings.  
						

							15
Screenshot 3
The Download window will be displayed.
Step 7
After confirming that the displayed address is correct,
click the [Start Download (D)] button.
Downloading of the setting values will start.
Screenshot 4
The Download Completed window will be displayed
when download is completed.
Step 8
Click the [OK] button.
Important:
When download is started while the setup file is being edited, the following window will be displayed.
When the [Yes] button is clicked, the setup file currently
being edited will be overwritten by the setting values to be
downloaded.
When the setup file currently being edited is to be saved,
click the [No] button to cancel downloading of the setting
values. Save the edited setup file first and then start the
download. 
						

							16
Upload the Setup File
Screenshot 1
Operate using the buttons on the tool bar on the opera-
tion window.
Step 1
Click the [Upload] button on the tool bar.
It is also possible to upload the created/edited setup file to the network disk recorder.
Important:
•When trying to upload the setup file, entering the Administrator password of the network disk recorder will be
required. Refer to the Setup Instructions (PDF) for further information.
•When the camera settings (Camera - NW Camera Setup) are changed, there may be possibilities that images
from the camera cannot be displayed. At the default setting, the setting values of NW Camera Setup are set as
a masked item. (The setting values will not be uploaded.)
•When the network settings (Comm - Basic setup) are changed, connection error may occur on the network
disk recorder.
At the default setting, the setting values of Basic setup are set as a masked item. (The setting values will not be
uploaded. Refer to the next page for further information.)
•Do not upload the setup file to the same network disk recorder from two or more PCs simultaneously using this
software. Otherwise, an error may occur on the network disk recorder.
•When the setting for Line Speed (Comm - Basic setup - Line Speed) is changed, the network disk recorder
will restart.
•It is impossible to upload the setup file during starting up the network disk recorder or while performing the sys-
tem check of the network disk recorder. 
						

							17
Screenshot 2
The Upload window will be displayed.
Step 2
Enter the address of the network disk recorder to which
the setup file is to be uploaded.
Step 3
Enter the HTTP port number of the network disk
recorder.
Step 4
Enter the Adminisrator password of the network disk
recorder.
Step 5
When any settings of the following items are not to be
uploaded, check the Mask Setup Data checkbox and
click the [Property Settings] button.
When all of the settings are to be uploaded, go to step 8
after confirming that the Mask Setup Data check box is
not checked.
Screenshot 3
The Mask Setup window will be displayed.
Step 6
Check the checkbox next to the setup item not to be
uploaded.
Note:
At the default setting, the setting values of the
Camera– NW Camera Setup and Comm –
Basic Setup are set as a masked item.
Step 7
Click the [OK] button. 
						

							18
Screenshot 4
The Mask Setup window will be closed.
Step 8
When using a proxy server, check the Use a Proxy
Server checkbox and enter the address and the port
number.
Step 9
Click the [OK] button after completing the settings.
Screenshot 5
The Upload window will be displayed.
Step 10
After confirming that the displayed address is correct,
click the [Start Upload (U)] button.
Uploading of the setup file will start.
Screenshot 6
The Upload Completed window will be displayed when
upload is completed.
Step 11
Click the [OK] button. 
						

							19
Open the Setup File
Screenshot 1
Operate using the buttons on the tool bar on the opera-
tion window.
Step 1
Click the [Open] button on the tool bar.
Open the saved setup file as follows.
Screenshot 2
The Open window will be displayed.
Step 2
Select the desired setup file and click the [Open] button.
The setup file will open and the operation window will be
displayed.
Important:
When opening a setup file while other setup file is
being edited, the following window will be displayed.
When the [Yes] button is clicked, the newly opened
setup file will overwrite the setup file currently being
edited.
When the setup file currently being edited is to be
saved, click the [No] button to cancel to open the
setup file. Save the edited setup file first and then
open the desired setup file. 
						

							20
Save the Setup File
Screenshot 1
Operate using the buttons on the tool bar on the opera-
tion window.
Step 1
Click the [Save As] button on the tool bar after editing
the setup file. Save the edited setup file as follows.
Screenshot 2
The Save As window will be displayed.
Step 2
Designate the file name and the directory where the file
is to be saved.
Step 3
Click the [Save] button to save the setup file.
The setup file will be saved.
Notes:
•The setup file will be saved as an xml format file
(extension: xml).
•The following characters cannot be used for a file
name.
\, /, :, *, ?, “, , |
Important:
Do not edit the setup file using any other software such as a text editor. Otherwise, it may be impossible to open
or upload the setup file with this software.
Any problem occurring which is caused by the edited setup file using other software is not covered by the war-
ranty.