Home
>
Panasonic
>
Recording Equipment
>
Panasonic Administrator Console Wj Nd300 Operating Instructions
Panasonic Administrator Console Wj Nd300 Operating Instructions
Here you can view all the pages of manual Panasonic Administrator Console Wj Nd300 Operating Instructions. The Panasonic manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.
Page 11
Special Days Operable Operable Time Table Operable Operable Program Operable Operable Schedule Basic Setup Operable Operable Terminal Setup Operable Operable Site Alarm Setup Operable Operable Command Alarm Setup Operable Operable Event 11 Setting Items The following setting items can be operated using this software. The tables below show the available setting items when using this software and when using a web browser respec- tively. Refer to the Setup Instructions (PDF) of the network disk recorder....
Page 12
Administrator Edit and User Edit/Delete are operable on the User Regist. window. User Mng. Basic Setup Host Regist. User LevelOperable Operable Host Edit/Delete is operable on the Host Regist. window. OperableOperable Operable Operable User Regist. Operable Operable FTP Setup Operable Operable Mail Setup Operable Operable Panasonic Alarm Protocol Operable Operable Comm Basic Setup Operable Operable DNS Setup Operable Operable DDNS Setup Operable Operable Proxy Setup Operable Operable SNMP Setup Operable...
Page 13
13 Data Delete Save/LoadOnly HDD Auto Delete is operable. It is impossible to delete data in the recording area manually. Not operableOperable Operable Config Not operable Operable Partition Information Not operable Not operable Network Information Not operable Not operable Disk End Mode HDD Capacity WarningOperable OperableOperable Operable Maintenance Product Information Operable Temperature inside the unit will not be displayed.Operable Disk Information Only Warning for Disk Life Time is operable. It...
Page 14
![Page 14
14
Screenshot 1
Operate using the buttons on the tool bar on the opera-
tion window.
Step 1
Click the [Download] button on the tool bar.
Download the Setting Values
It is also possible to download the setting values and save it as a setup file.
Important:
•It is impossible to download the setting values while starting up the network disk recorder or during performing
the system check of the network disk recorder.
•When trying to download the setting values, entering the Administrator password of the...](http://img.usermanuals.tech/thumb/58/69478/w300_wj-nd300_console_en_om_d-13.png "Page 14
14
Screenshot 1
Operate using the buttons on the tool bar on the opera-
tion window.
Step 1
Click the [Download] button on the tool bar.
Download the Setting Values
It is also possible to download the setting values and save it as a setup file.
Important:
•It is impossible to download the setting values while starting up the network disk recorder or during performing
the system check of the network disk recorder.
•When trying to download the setting values, entering the Administrator password of the...")
14 Screenshot 1 Operate using the buttons on the tool bar on the opera- tion window. Step 1 Click the [Download] button on the tool bar. Download the Setting Values It is also possible to download the setting values and save it as a setup file. Important: •It is impossible to download the setting values while starting up the network disk recorder or during performing the system check of the network disk recorder. •When trying to download the setting values, entering the Administrator password of the...
Page 15
![Page 15
15
Screenshot 3
The Download window will be displayed.
Step 7
After confirming that the displayed address is correct,
click the [Start Download (D)] button.
Downloading of the setting values will start.
Screenshot 4
The Download Completed window will be displayed
when download is completed.
Step 8
Click the [OK] button.
Important:
When download is started while the setup file is being edited, the following window will be displayed.
When the [Yes] button is clicked, the setup file currently
being edited...](http://img.usermanuals.tech/thumb/58/69478/w300_wj-nd300_console_en_om_d-14.png "Page 15
15
Screenshot 3
The Download window will be displayed.
Step 7
After confirming that the displayed address is correct,
click the [Start Download (D)] button.
Downloading of the setting values will start.
Screenshot 4
The Download Completed window will be displayed
when download is completed.
Step 8
Click the [OK] button.
Important:
When download is started while the setup file is being edited, the following window will be displayed.
When the [Yes] button is clicked, the setup file currently
being edited...")
15 Screenshot 3 The Download window will be displayed. Step 7 After confirming that the displayed address is correct, click the [Start Download (D)] button. Downloading of the setting values will start. Screenshot 4 The Download Completed window will be displayed when download is completed. Step 8 Click the [OK] button. Important: When download is started while the setup file is being edited, the following window will be displayed. When the [Yes] button is clicked, the setup file currently being edited...
Page 16
![Page 16
16
Upload the Setup File
Screenshot 1
Operate using the buttons on the tool bar on the opera-
tion window.
Step 1
Click the [Upload] button on the tool bar.
It is also possible to upload the created/edited setup file to the network disk recorder.
Important:
•When trying to upload the setup file, entering the Administrator password of the network disk recorder will be
required. Refer to the Setup Instructions (PDF) for further information.
•When the camera settings (Camera - NW Camera Setup) are changed,...](http://img.usermanuals.tech/thumb/58/69478/w300_wj-nd300_console_en_om_d-15.png "Page 16
16
Upload the Setup File
Screenshot 1
Operate using the buttons on the tool bar on the opera-
tion window.
Step 1
Click the [Upload] button on the tool bar.
It is also possible to upload the created/edited setup file to the network disk recorder.
Important:
•When trying to upload the setup file, entering the Administrator password of the network disk recorder will be
required. Refer to the Setup Instructions (PDF) for further information.
•When the camera settings (Camera - NW Camera Setup) are changed,...")
16 Upload the Setup File Screenshot 1 Operate using the buttons on the tool bar on the opera- tion window. Step 1 Click the [Upload] button on the tool bar. It is also possible to upload the created/edited setup file to the network disk recorder. Important: •When trying to upload the setup file, entering the Administrator password of the network disk recorder will be required. Refer to the Setup Instructions (PDF) for further information. •When the camera settings (Camera - NW Camera Setup) are changed,...
Page 17
![Page 17
17
Screenshot 2
The Upload window will be displayed.
Step 2
Enter the address of the network disk recorder to which
the setup file is to be uploaded.
Step 3
Enter the HTTP port number of the network disk
recorder.
Step 4
Enter the Adminisrator password of the network disk
recorder.
Step 5
When any settings of the following items are not to be
uploaded, check the Mask Setup Data checkbox and
click the [Property Settings] button.
When all of the settings are to be uploaded, go to step 8
after confirming...](http://img.usermanuals.tech/thumb/58/69478/w300_wj-nd300_console_en_om_d-16.png "Page 17
17
Screenshot 2
The Upload window will be displayed.
Step 2
Enter the address of the network disk recorder to which
the setup file is to be uploaded.
Step 3
Enter the HTTP port number of the network disk
recorder.
Step 4
Enter the Adminisrator password of the network disk
recorder.
Step 5
When any settings of the following items are not to be
uploaded, check the Mask Setup Data checkbox and
click the [Property Settings] button.
When all of the settings are to be uploaded, go to step 8
after confirming...")
17 Screenshot 2 The Upload window will be displayed. Step 2 Enter the address of the network disk recorder to which the setup file is to be uploaded. Step 3 Enter the HTTP port number of the network disk recorder. Step 4 Enter the Adminisrator password of the network disk recorder. Step 5 When any settings of the following items are not to be uploaded, check the Mask Setup Data checkbox and click the [Property Settings] button. When all of the settings are to be uploaded, go to step 8 after confirming...
Page 18
![Page 18
18
Screenshot 4
The Mask Setup window will be closed.
Step 8
When using a proxy server, check the Use a Proxy
Server checkbox and enter the address and the port
number.
Step 9
Click the [OK] button after completing the settings.
Screenshot 5
The Upload window will be displayed.
Step 10
After confirming that the displayed address is correct,
click the [Start Upload (U)] button.
Uploading of the setup file will start.
Screenshot 6
The Upload Completed window will be displayed when
upload is completed.
Step...](http://img.usermanuals.tech/thumb/58/69478/w300_wj-nd300_console_en_om_d-17.png "Page 18
18
Screenshot 4
The Mask Setup window will be closed.
Step 8
When using a proxy server, check the Use a Proxy
Server checkbox and enter the address and the port
number.
Step 9
Click the [OK] button after completing the settings.
Screenshot 5
The Upload window will be displayed.
Step 10
After confirming that the displayed address is correct,
click the [Start Upload (U)] button.
Uploading of the setup file will start.
Screenshot 6
The Upload Completed window will be displayed when
upload is completed.
Step...")
18 Screenshot 4 The Mask Setup window will be closed. Step 8 When using a proxy server, check the Use a Proxy Server checkbox and enter the address and the port number. Step 9 Click the [OK] button after completing the settings. Screenshot 5 The Upload window will be displayed. Step 10 After confirming that the displayed address is correct, click the [Start Upload (U)] button. Uploading of the setup file will start. Screenshot 6 The Upload Completed window will be displayed when upload is completed. Step...
Page 19
![Page 19
19
Open the Setup File
Screenshot 1
Operate using the buttons on the tool bar on the opera-
tion window.
Step 1
Click the [Open] button on the tool bar.
Open the saved setup file as follows.
Screenshot 2
The Open window will be displayed.
Step 2
Select the desired setup file and click the [Open] button.
The setup file will open and the operation window will be
displayed.
Important:
When opening a setup file while other setup file is
being edited, the following window will be displayed.
When the [Yes]...](http://img.usermanuals.tech/thumb/58/69478/w300_wj-nd300_console_en_om_d-18.png "Page 19
19
Open the Setup File
Screenshot 1
Operate using the buttons on the tool bar on the opera-
tion window.
Step 1
Click the [Open] button on the tool bar.
Open the saved setup file as follows.
Screenshot 2
The Open window will be displayed.
Step 2
Select the desired setup file and click the [Open] button.
The setup file will open and the operation window will be
displayed.
Important:
When opening a setup file while other setup file is
being edited, the following window will be displayed.
When the [Yes]...")
19 Open the Setup File Screenshot 1 Operate using the buttons on the tool bar on the opera- tion window. Step 1 Click the [Open] button on the tool bar. Open the saved setup file as follows. Screenshot 2 The Open window will be displayed. Step 2 Select the desired setup file and click the [Open] button. The setup file will open and the operation window will be displayed. Important: When opening a setup file while other setup file is being edited, the following window will be displayed. When the [Yes]...
Page 20
![Page 20
20
Save the Setup File
Screenshot 1
Operate using the buttons on the tool bar on the opera-
tion window.
Step 1
Click the [Save As] button on the tool bar after editing
the setup file. Save the edited setup file as follows.
Screenshot 2
The Save As window will be displayed.
Step 2
Designate the file name and the directory where the file
is to be saved.
Step 3
Click the [Save] button to save the setup file.
The setup file will be saved.
Notes:
•The setup file will be saved as an xml format file...](http://img.usermanuals.tech/thumb/58/69478/w300_wj-nd300_console_en_om_d-19.png "Page 20
20
Save the Setup File
Screenshot 1
Operate using the buttons on the tool bar on the opera-
tion window.
Step 1
Click the [Save As] button on the tool bar after editing
the setup file. Save the edited setup file as follows.
Screenshot 2
The Save As window will be displayed.
Step 2
Designate the file name and the directory where the file
is to be saved.
Step 3
Click the [Save] button to save the setup file.
The setup file will be saved.
Notes:
•The setup file will be saved as an xml format file...")
20 Save the Setup File Screenshot 1 Operate using the buttons on the tool bar on the opera- tion window. Step 1 Click the [Save As] button on the tool bar after editing the setup file. Save the edited setup file as follows. Screenshot 2 The Save As window will be displayed. Step 2 Designate the file name and the directory where the file is to be saved. Step 3 Click the [Save] button to save the setup file. The setup file will be saved. Notes: •The setup file will be saved as an xml format file...