Panasonic Admin Console Wjmpu955a Operating Instructions

Configuration 
 
 
137   
There are four user levels having varying restrictions as follows: 
 
Level 1: Access to all areas of the MPU955A Admin Console configuration, setup, and 
management. 
 
 
 
Level 2:  Access for modification of all configuration, setup, and management areas 
except GX Device and Account Manager. 
 
 
 
Level 3:  Can view databases, log manager, and get the current configuration from the 
MCPU.  No access to the AC Log or Account Manager, and unable to change 
configurations....

Configuration 
 
 
138  Level 4:  Can only view the Log Manager.  No access to any other area of MPU955A 
Admin Console. 
 
 
4. Click the green check mark to save 
 
You will remain in the “Add” mode, allowing you to enter information about another 
MPU955A Admin Console user. 
 
5. To exit the “Add” mode, click the red X 
 
You will exit the add mode. 
 
6. To edit a configured AC user, highlight a user name and click the “Edit 
Record” button 
 
You may also double-click on an AC user name on the list...

Configuration 
 
 
139 
Help 
 
An on-line help file introduces the MPU955A Admin Console software and allows for a 
keyword search of topics.  Select the Contents… command from the Help menu. 
 
 
 
Help is also available from any of the MPU955A Admin Console windows by pressing 
the F1 key on the computer’s keyboard.  This will display information about the window 
from which F1 was pressed.  
 
On-line help is available to guide an administrator through software installation, creating 
and configuring...

Appendix A 
 
 
140 
Appendix A 
 
This appendix outlines, by category, the various fields and the valid values for those 
fields in the table that appears when the Advanced Config button is selected on the GX 
Device screen, and the GX Details window appears. 
 
Choose which details you wish to view using the drop-down menu in the upper left 
corner of the screen. A description for each field within each detail category follows. 
 
Alarm Notification 
 
 ALARM NOTIFICATION 
Field Data 
Mode Description:...

Appendix A 
 
 
141 
 ALARM NOTIFICATION 
Field Data 
Alarm  
Retransmission 
Timer Description: Specifies a retry timer for an alarm notification. When GX device does not 
receive a response of an alarm notification packet, it sends the same packet after this timer 
expires. 
Validation: decimal numeral 0-255 
Default Setting: 10 
Control Site Description: Specifies IP address of the camera control site. 
Validation: 0 for WJ-MPU955A, 1 for other device. When this value is set to 1, Control 
Address is...

Appendix A 
 
 
142 
 DIGITAL SYSTEM SETUP 
Field Data 
NTP Port No. Description: Specifies a NTP server port number. 
Validation: hexadecimal numeral 0000 -FFFF 
Default Setting: (None) 
NTP Time Interval Description: Specifies a NTP sequence time in hex format. The time unit is in hours. 
Validation: hexadecimal numeral 01 - 18 
Default Setting: 1 
Host Name Description: Specifies a host name of the device. It is a string up to 64 characters. 
Validation: Within 64 characters. 
Default Setting: (None)...

Appendix A 
 
 
143 
 ENCODER 
Field Data 
Port Description: Specifies a local control port for the device. 
Validation: decimal format, 1 - 1024 
Default Setting: Automatically assigned. 
Note: This port number is the same as the port number of the CAMERA page, and it is necessary to 
associate it. 
Audio Description: Specifies the audio mode for the device. 
Validation: 0 = OFF, 1 = ON 
Default Setting: 0 
Video & Audio 
Encryption Description: Specifies the video stream classification. 
Validation: 0...

Appendix A 
 
 
144 
 ENCODER 
Field Data 
Comment Description: A string to put comment notes. 
Validation: Within 16 characters. 
Default Setting: (None) 
 
 
Decoder 
 
 DECODER 
Field Data 
Device ID Description: GX device identifier is a local physical number that is uniquely identified within a 
system domain. Its format is shown as below: 
        _ _ _ _  _ X X X  device id (by rotary SW of an decoder front panel) 
        X X X X X _ _ _   device type  
Validation: Device type [0x0F000 encode,...

Appendix A 
 
 
145 
 DECODER 
Field Data 
Background Color Description: Specifies the background color of character on the monitor. 
Validation: 0 = OFF, 1=ON 
Default Setting: 0 
Latency Buffer Description: Specifies decode buffer memory size for network latency. The Memory size is in 
Mbits 
Validation: 0, 0.5, 1, 2, 4, 8, 16, 32 
Default Setting: 0 
Comment Description: A string to put comment notes. 
Validation: Within 16 characters. 
Default Setting: (None) 
 
 
Digital Input 
 
 DIGITAL INPUT...

Appendix A 
 
 
146  Digital Output 
 
 DIGITAL OUTPUT 
Field Data 
Device ID Description: GX device identifier is a local physical number that is uniquely identified within a 
system domain. Its format is shown as below: 
        _ _ _ _  _ X X X  device id (by rotary SW of an encoder front panel) 
        X X X X X _ _ _   device type  
Validation: Device type [0x0F000 encode, 0x1F000 decoder, other reserved] 
Default Setting: 0x0F000XXX 
XXX is the value registered in Address[SW1] of the previous page...