Panasonic Admin Console Wjmpu955a Operating Instructions

Configuration 
 
 
107   
1. To add a tour sequence, click the green Add Tour button 
 
The following panel will appear. 
 
 
 
MPU955A Admin Console will automatically assign the next available ID.   
 
2. Fill in an area and local number 
 
Be aware that changing the area may affect other configured 
components such as alarm target assignments. 
 
3. Give the tour a descriptive name 
 
4. Add a camera in the Sequence of Steps 
 
Double-click on a camera ID in the list on the right.  It will...

Configuration 
 
 
108  To enter the same value in several steps, highlight desired cells using the click 
and drag method.  Type in a value and press the enter key.  All highlighted cells 
will be filled with the typed value. 
 
6. Type a dwell time in seconds for each step 
 
7. Double-click on AUX1 or AUX2 to change its setting from none (blank), to 
On, Off, or On/Off as desired, and if available 
 
8. To add a step in the middle of a sequence, highlight a step and 
click the Insert Step button 
 
A...

Configuration 
 
 
109  Replicating a Tour Sequence Definition 
 
1. Highlight a configured Tour Sequence ID and click the 
Replicate Tour button 
 
A confirmation message will appear asking “Are you sure you want to REPLICATE this 
Tour within this Area?” and explaining the replication rules: 
 
[1] Records will be generated according to ID. 
 
[2] ID will be incremented to the next available value. 
 
[3] Local # will be incremented from a specified base value you assign. 
 
[4] If a record already...

Configuration 
 
 
110  To modify the replicated Tour Sequences, use the Edit Tour button. 
 
The Other tab on the Tour Sequences window shows the Alarms that the selected Tour 
Sequence ID is associated with. 
 
 
  

Configuration 
 
 
111 
Group Presets 
 
A Group Preset carries its own ID, and is created from MPU955A Admin Console to 
include a list of camera-monitor connections.  An operator selecting a Group Preset is 
able to display a preset series of camera views over several monitors at one time.  Each 
camera-monitor connection must also include a camera-preset position. 
 
Group Presets must be carefully planned, keeping in mind that they may be used as 
elements of Group Sequences.  Keeping camera-monitor...

Configuration 
 
 
112  
2. Add, edit, delete, and replicate Group Presets, as necessary, using the four buttons 
at the bottom of this window. 
 
 
 GROUP PRESETS – Definition 
Field Data 
ID  Unique record number identifying a single Group Preset assembling several camera-
monitor pairs that an operator can view at one time.  MPU955A Admin Console assigns this 
ID as a Group Preset is added. 
MPU955A Admin Console automatically generates this number in consecutive order.  Upon 
adding Group Presets,...

Configuration 
 
 
113  1. To add a group preset, click the green Add Preset button 
 
The following panel will appear. 
 
 
 
MPU955A Admin Console will automatically assign the next available ID. 
 
2. Fill in the area and local number 
 
3. Give the group preset a descriptive name 
 
4. Add camera to monitor pairs to the Set of View section by clicking on the 
ID numbers for each as needed  
 
Double-click on a camera and a monitor from the lists on the right.  It will automatically 
insert that...

Configuration 
 
 
114  6. To add a step in the middle of a sequence, highlight a step and 
click the Insert View button  
 
A blank row will appear before the highlighted step. 
 
7. To delete a step, highlight a step and click the Delete View 
button 
 
The entire row will be deleted. 
 
After adding all desired steps, click the green check mark to continue, or the red X to 
cancel 
 
Add, edit, delete, or replicate group presets as needed. 
 
When changing the area of an existing Group Preset, notice...

Configuration 
 
 
115   
Replicating a Group Preset Definition 
 
1. Highlight a configured Group Preset ID and click the Replicate 
Preset button 
 
A confirmation message will appear asking “Are you sure you want to REPLICATE this 
Preset within this Area?” and explaining the replication rules: 
 
[1] Records will be generated according to ID. 
 
[2] ID will be incremented to the next available value. 
 
[3] Local # will be incremented from a specified base value you assign. 
 
[4] If a record already...

Configuration 
 
 
116  Group Presets existing within the specified range will not
 be overwritten. 
 
6. To modify the replicated Group Presets, use the Edit Preset button 
 
The Other tab on the Group Presets window displays the Group Sequences associated 
with the selected Group Preset ID.