Panasonic Aac Wma Mp3 Cd Player Receiver Cq C7205 Operating Instructions

							CQ-C7205U/C7105U7
English
General
Radio
FM1, FM2, FM3, AM (aOperating Instructions)
Source Selection
(SOURCE)
The source changes as follows every time
[SOURCE]is pressed.
Player
When loading CD (aOperating Instructions)
When loading a disc containing compressed
audio files (aOperating Instructions)
AUX 1
Device connected to the AUX terminal of the this unit
System-up Connector
Device connected to the System-up Connector of this
unit
¡When optional devices are connected:
Shift to connected devices
¡When an expansion module is connected:
The devices connected to the ports 1 to 4 are
activated in sequence after shifting to AUX2 (devices
connected to the AUX terminal of the expansion
module).
When connecting DVD Changer (apage 8, 10)
When connecting CD Changer (apage 8)
When connecting iPod (apage 12)
When connecting XM Receiver (apage 14)
When connecting Sirius receiver (apage 17)
When connecting Expansion Module
$6@46@@FOHRYE
 
 
 

 .

Ö”´ 
						

							8CQ-C7205U/C7105U
Disc Changer(When CDs or MP3 discs are loaded)
Connected an optional CD changer or an optional DVD changer can be controlled by this unit.
1Load a magazine (discs).
When a magazine is already loaded, press
[SOURCE]to select the CD changer mode.
The unit recognizes the magazine and starts playing
automatically.
2Select a desired portion.
Disc selection
[}] (DISC): Next disc
[{] (DISC): Preceding disc
Folder up/Down
Only for DVD Changer
Hold down for 2 sec. or more.
[}] (FOLDER): Next folder
[{] (FOLDER): Preceding folder
Track/File selection
[7]: Next track/file
[6]: Preceding track/file (press twice)
Note: Hold down for fast forward/reverse.
Pause
Press[BAND] (y/ 5).
Press again to cancel.
Disc numberTime
lights when the changer is
connected. Play Mode indicators
lights when each mode is
activated.
(CD changer)
Changer indicator
Operation Flow CD Changer Mode Display
(DVD changer)
(Disc Random, Only for CD changer)
(Disc Repeat)
(Disc Scan, Only for CD changer)
Track/file
(Folder Repeat, Only for MP3 files)
$6@46@@FOHRYE
 
 
 

 .

Ö”´ 
						

							CQ-C7205U/C7105U9
English
Disc Changer 
(When CDs or MP3 discs are loaded)
Notes:
¡When CX-DP880U or CX-DH801U is connected, a CD-RW
disc is playable.
¡Trouble may occur while playing CD-Rs. Refer to the section
on “Notes on CD/CD Media (CD-ROM, CD-R, CD-RW)”. 
(aOperating Instructions)¡This unit does not support the following through the CD
changer.
¡MP3 playback.
Random and Repeat play can be set.
1Press [MENU]to display the menu dis-
play.
For using the remote
control, hold down
[SEL] (MENU)for 2
sec. or more.
2Turn [VOL]to select a function to be
adjusted.
For using the remote
control, use [}]or
[{].
3Press [PUSH
SEL]to adjust.
For using the remote control, use [BAND](SET).
4Press [MENU]to close the menu
screen.
For using the remote control, hold down [SEL]
(MENU)for 2 sec. or more.
RANDOM
¡CD-DA
RANDOM playback of the selected disc (DVD changer)
RANDOM playback of all discs in the magazine (CD
changer)
¡MP3 disc 
RANDOM playback of the selected folders
: Off (default)
: Random playback
DISC RANDOM (Only for CD changer)
: Off (default)
: Random playback (from selected disc)
REPEAT
: Off (default)
: Playing the current track/file repeatedly
DISC REPEAT (Only for CD-DA disc)
: Off (default)
: Playing the current disc repeatedly
FOLDER REPEAT (Only for MP3 disc)
: Off (default)
: Playing the current folder repeatedly
Play Mode Selection
One-touch operation is available for selecting a track
playing style by use of [RANDOM]or [REPEAT]. 
RANDOM, REPEAT
Press the button. Press again to cancel.
DISC RANDOM, DISC REPEAT, FOLDER REPEAT
Hold down the button for 2 sec. or more. 
Hold down again to cancel.
SCAN play
You can find your favorite file by playing first 10-sec. of
each file.
SCAN (CD changer: All tracks, DVD changer:
from selected disc)
Press [SCAN]. Press again to cancel.
DISC SCAN (1st file in each disc, only for CD
changer)
Hold down [SCAN]for 2 sec. or more. Hold down
again to cancel.
Direct Access
A disc can be directly selected.
Example: disc number 5
1Press [#](NUMBER).
2Press [5].
3Press [SET]. 
Note: To suspend direct
selection, press [DISP](Display).
Random, Repeat Play (Disc Changer Menu Display)
(RANDOM, REPEAT)
Functions Only by 
Remote Control Unit
$6@46@@FOHRYE
 
 
 

 .

Ö”´ 
						

							10CQ-C7205U/C7105U
Disc Changer (When DVDs or VCDs are loaded)
Connected an optional DVD changer (CX-DH801U) can be controlled by this unit.
1Load a magazine (discs).
When a magazine is already loaded, press
[SOURCE]to select the DVD changer mode.
The unit recognizes the magazine and starts playing
automatically.
Notes:
¡For DVD operations other than the above (i.e. DVD
menu, closed caption, etc.), use the remote con-
trol unit supplied with the DVD changer.
¡The remote control unit supplied with the DVD
changer does not work properly when you aim it
at this unit.
¡When using the remote control unit supplied with
the DVD changer, aim it at the monitor display
(CY-V7100U).
2Select a desired portion.
Disc selection
[}] (DISC): Next disc
[{] (DISC): Preceding disc
Chapter/Track selection
[7]: Next chapter/Next track
[6]: Preceding chapter/ Preceding track
(press twice)
Note: Hold down for fast forward/reverse.
Pause
Press[BAND] (y/ 5).
Press again to cancel.
Disc numberTime
lights when the changer is
connected. Play Mode indicators
lights when each mode is
activated.
Chapter number
Changer indicator
(Disc Repeat)
(Chapter Repeat)
(Title Repeat)
Operation Flow DVD Changer Mode Display
Disc type
$6@46@@FOHRYE
 
 
 

 .

Ö”´ 
						

							CQ-C7205U/C7105U11
English
Disc Changer
(When DVDs or VCDs are loaded) 
Repeat play can be set.
1Press [MENU]to display the menu dis-
play.
For using the remote
control, hold down
[SEL] (MENU)for 2
sec. or more.
2Turn [VOL]to select a function to be
adjusted.
For using the remote
control, use [}]or
[{].
3Press [PUSH
SEL]to adjust.
For using the remote control, use [BAND](SET).
4Press [MENU]to close the menu
screen.
For using the remote control, hold down [SEL]
(MENU)for 2 sec. or more.
¡For a DVD insertion
CHAPTER REPEAT
: Off (default)
: Playing the current chapter repeatedly
TITLE REPEAT
: Off (default)
: Playing the current title repeatedly
Note:The unit may not operate for some DVDs.
¡For a VCD insertion
REPEAT
: Off (default)
: Playing the current track repeatedly
DISC REPEAT
: Off (default)
: Playing the current disc repeatedly
Notes:
¡The unit may not operate for some VCDs.
¡The unit may not operate for a disc with the play back
function activated.
Play Mode Selection
One-touch operation is available for selecting a chapter
playing style by use of [REPEAT].
CHAPTER REPEAT, REPEAT
Press the button. Press again to cancel.
TITLE REPEAT, DISC REPEAT
Hold down the button for 2 sec. or more. Hold
down again to cancel.
Direct Access
A disc can be directly selected.
Example:disc number 5
1Press [#](NUMBER).
2Press [5].
3Press [SET].
Note: To suspend direct selection, press [DISP]
(DISPLAY).
Random, Repeat Play (DVD Changer Menu Display)
(RANDOM, REPEAT)
Functions Only by Remote Control Unit
$6@46@@FOHRYE
 
 
 

 .

Ö”´ 
						

							12CQ-C7205U/C7105U
iPod Control
Connection of the optional direct cable for iPod (CA-DC300U) allows users to operate the iPod including file selection and file
sequence change with the buttons on this unit.
1Connect the iPod.
2Press [SOURCE]to select the iPod
mode. Playback starts.
Note: If playback does not start, press [BAND]
(y/ 5).
3Select a desired portion.
File Selection
[7]: Next file
[6]: Beginning of the current file 
For the previous file, press twice.
Note: Hold down for fast forward/reverse.
Pause
Press[BAND] (y/ 5).
Press again to cancel.
Current fileTime
lights when the direct cable
for iPod (CA-DC300U) is
connected.
*Even when the iPod itself
is not connected, this
indicator will also light.
This indicates that the main
unit normally operates. Play Mode indicators
lights when each mode is activated.
(iPod 1)
iPod number The type with which playback data is classified is
selectable.
1Press [}] (LIST)to call up the play
mode selection screen.
2Turn [VOL]to select the play mode.
: Playback by playlist
: Playback by artist
: Playback by album
For using the remote control, use [}]or [{].
Note: When the []]button is pressed, the regular
screen appears.
3Press [PUSH SEL]to determine the
selection.
For using the remote control, use [BAND](SET).
4Turn [VOL]to select the portion to play.
Notes:
¡For selecting ARTIST, the ALBUM selection
screen appears after selecting an artist name.
¡When the []]button is pressed, the previous
screen appears.
5Press [PUSH SEL]to determine the
selection.
For using the remote control, use [BAND](SET).
Note: Files without an album name or an artist
name are not playable in the playing mode of the
album or artist display respectively.
Operation Flow Playing Mode selection iPod Mode Display
(iPod 2)
(Random)
(Repeat)(Album Random)
$6@46@@FOHRYE
 
 
 

 .

Ö”´ 
						

							CQ-C7205U/C7105U13
English
iPod Control
Notes:
¡The iPod equipped with a dock connector is exclusively
connectable. Further information about the controllable
iPod is described below.
Controllable iPod/software version
¡3rd generation iPod/ver. 2.3
¡4th generation iPod/ver. 3.1.1
¡5th generation iPod/ver. 1.1.2 
(Video playback is not supported.)
¡iPod Photo/ver. 1.2.1
¡iPod mini/ver. 1.4.1
¡iPod nano/ver. 1.2
* Operation check has been completed with software available at
the end of October, 2006. We do not guarantee the operation
with our future products or upgraded software.
¡The shuffle function of iPod corresponds to the RANDOM
function of this unit.
¡Please make sure to detach the iPod after turning off the car
engine (turning the ACC to OFF). The iPod may not shut down
while still connected, which may result in battery depletion.
¡Please do not connect iPod accessories such as an iPod
remote control or headphones while connecting iPod with
the unit. The unit may not operate correctly.
¡Connect this unit after turning down the volume of the iPod.
¡“NO iPod” appears until the iPod is recognized after con-
necting the iPod, turning on the power of the main unit, or
performing source selection on the main unit side. This indi-
cates there is nothing wrong with the main unit.
¡We do not guarantee all the operations of connectable devices.
Random and Repeat play can be set.
1Press [MENU]to display the menu dis-
play.
For using the remote
control, hold down
[SEL] (MENU)for 2
sec. or more.
2Turn [VOL]to select a function to be
adjusted.
For using the remote
control, use [}]or
[{].
3Press [PUSH
SEL]to adjust.
For using the remote control, use [BAND](SET).
4Press [MENU]to close the menu
screen.
For using the remote control, hold down [SEL]
(MENU)for 2 sec. or more.
RANDOM (Shuffle)
: Off 
: From all available files
ALBUM RANDOM
: Off
: From files in the selected album
REPEAT
: Off
: Playing the current file repeatedly
Note:All files are played back even at REPEAT-off
setting. (ALL REPEAT)
TEXT
Text display
: Name/Title (default)
: Album/Title
: Disabled
Note:The title may not be displayed correctly if it is
longer than 250 alphanumeric characters.
Play Mode Selection
One-touch operation is available for selecting a track
playing style by use of [RANDOM]or [REPEAT]. 
RANDOM, REPEAT
Press the button. Press again to cancel.
ALBUM RANDOM
Hold down the button for 2 sec. or more. Hold
down again to cancel.
Random, Repeat Play (iPod Menu Display)
(RANDOM, REPEAT)
Functions Only by
Remote Control Unit
$6@46@@FOHRYE
 
 
 

 .

Ö”´ 
						

							14CQ-C7205U/C7105U
XM Receiver
Preparation
Connecting XM receiver
¡Connect the optional XM receiver (XMD-1000) with
optional Digital Adapter.
Getting Started
It is required to sign up to become an XM Satellite Radio
subscriber. After checking your XM Satellite Radio ID,
sign up on the XM’s website or by calling them.
1Check of XM Satellite Radio ID
¡Write down the ID indicated on the lower right of your
XM receiver (XMD-1000).
¡Check the ID shown by tuning your XM Radio to
channel 0. (Refer to “Channel Selection” on page 15.)
RADIO ID display
2Activate the XM Satellite Radio
Select either of the below to sign up.
¡Web site: http://www.xmradio.com/activation
¡Phone number: 1-800-852-9696
XMD 1000
L/C1144XXXXXXXM RADIO ID : XXXXXXXXXM RADIO ID
$6@46@@FOHRYE
 
 
 

 .

Ö”´ 
						

							CQ-C7205U/C7105U15
English
XM Receiver
1Press [SOURCE]to select the XM
Satellite Radio mode.
2Press [BAND]to select a band.
Notes:
¡Connect the optional XM receiver (XMD-1000).
¡To connect the XM receiver (XMD-1000), it is
required to use an optional extension cord that is
produced by XM exclusively for Panasonic prod-
ucts.
¡“RADIO ID” is displayed with channel 0.
¡“UPDATING” is displayed during the update of the
identification code.
¡“LOADING” is displayed during the acquisition of
audio data or information.
3Select a channel.
Channel selection
[]] (TUNE): Preceding channel
[[] (TUNE): Next channel
Preset channel selection
[{] (P-SET: Preset): Lower preset channel
[}] (P-SET: Preset): Higher preset channel
Notes:
¡Direct selection can be executed with [1]to [6]
buttons on remote control.
¡A preset station is selectable by turning [VOL]
and pressing [PUSH SEL]while the preset list
screen is present on the monitor.
¡The volume is not adjustable while the preset list
screen is present on the monitor.
Up to 6 channels can be preset in XM1 to XM3
respectively.
Preset channelscan be simply called up by pressing [}]
(P-SET) or [{] (P-SET).
Note:Direct selection can be executed with [1]to [6]
buttons on remote control.
1Tune into a channel.
2Hold down [}]or [{]for 2 sec. or
more.
3Turn [VOL]to select a preset number.
4Hold down [PUSH SEL]for 2 sec. or
more, and the channel is written on the
selected preset number.
Preset number/channel number blinks once.
Notes:
¡In step 2, a channel can be registered by holding
down the numeric button [1]to [6]for 2 sec. or more.
¡To stop presetting channels, press [DISP: DISPLAY].
¡The operation above allows users to replace the cur-
rent channel with the channel preset in the selected
number while selecting a preset channel.
¡The channel may be different between when the chan-
nel is preset and when the channel is called up
because channel preset is performed using Service ID.  
XM Receiver
Mode DisplayArtist name/Song title 
BandPreset Number
Channel number/name
indicates the satellite
receiver is ready.
Operation Flow Channel Preset
(P-SET: PRESET)
$6@46@@FOHRYE
 
 
 

 .

Ö”´ 
						

							16CQ-C7205U/C7105U
Selection by Category
Functions Only by
Remote Control Unit
Direct Access
A channel can be directly selected.
Example: channel number 5
1Press [#](NUMBER).
2Press [5].
3Press [SET].
Note:To suspend direct selection, press [DISP]
(DISPLAY).
You can toggle the category on and off every time you
hold down [BAND]for 2 sec. or more. If the category is
set to on, the unit operates as follows for each button:
Do not set Category to ON while receiving Channel 1.
Failure to observe this disables channel change. 
Channel selection
[]] (TUNE): Preceding channel in current category
[[] (TUNE): Next channel in current category
Category selection
[{] (P-SET: Preset): Preceding category
[}] (P-SET: Preset): Next category
TEXT Setting (XM Receiver Menu Display)
1Press [MENU]to display the menu dis-
play.
For using the remote
control, hold down
[SEL] (MENU)for 2
sec. or more.
2Press [PUSH SEL]to adjust.
For using the remote
control, use [BAND]
(SET).
3Press [MENU]to close the menu
screen.
For using the remote control, hold down [SEL]
(MENU)for 2 sec. or more.
TEXT
Text display
: Enabled (default)
: Disabled
lights when category is set to on.
XM Receiver (continued)
$6@46@@FOHRYE
 
 
 

 .

Ö”´