Panasonic 720p Multi Purpose Digital Camera Ak Hc900p Operating Instructions

							21
   PED,GAMMA,FLARE
   M PED                :+027
   R PED                :+000
   B PED                :+000
   M GAMMA              :0.45
   R GAMMA              :+00
   B GAMMA              :+00
   R FLARE              :010
   G FLARE              :000
   B FLARE              :017
   GAMMA                :ON
   FLARE                :ON°° °°
Setting of Menu Items
!Maintenance menu
2Pedestal, gamma, flare adjustment
menu
M PED: Master pedestal can be adjusted
only by turning the control panel VR.
The R, G, B pedestal can be totally ad-
justed.
R, B PED: R, B pedestal adjustment.
Besides the master pedestal adjustment,
R, B pedestal can be independently ad-
justed.  It is not related to DATA REF.  The
numeral display after normal ending of
ABB is “0” for both of R, B.
M GAMMA: Master gamma adjustment.
The R, G, B gamma can be totally ad-
justed.
R, B GAMMA: R, B gamma adjustment.
Besides the master gamma adjustment,
R, B gamma can be independently ad-
justed.
R FLARE: R flare adjustment
G FLARE: G flare adjustment
B FLARE: B flare adjustment
GAMMA: Gamma ON/OFF setting
FLARE: Flare ON/OFF setting 
						

							22
   KNEE,WHITE CLIP
   M KNEE POINT         :95.00%
   R KNEE POINT         :+00.00%
   B KNEE POINT         :+00.00%
   M KNEE SLOPE         :95.00%
   R KNEE SLOPE         :+000
   B KNEE SLOPE         :+000
   A.KNEE POINT         :95.00%
   A.KNEE LVL           :108
   WHITE CLIP LVL       :109%
   KNEE                 :MANU
   WHITE CLIP           :ON°° °°
Setting of Menu Items
!Maintenance menu
3Knee&white clip adjustment menu
M KNEE POINT: Master knee point ad-
justment.
G, B, R knee point can be totally adjusted.
R, B KNEE POINT: R, B knee point ad-
justment.
Besides the master knee point adjust-
ment, R, B knee point can be independ-
ently adjusted.
M KNEE SLOPE: Master knee slope ad-
justment.
G, B, R knee slope can be totally ad-
justed.
R, B KNEE SLOPE: R, B knee slope ad-
justment.
Besides the master knee slope adjust-
ment, R, B knee slope can be indepen-
dently adjusted.
A. KNEE POINT: Auto knee point setting.
Knee point in auto knee mode is set.
A. KNEE LVL: Auto knee level.
WHITE CLIP LVL: White clip level ad-
justment.
Video level with white clipped is set.
KNEE: KNEE mode (OFF/MANU/AUTO)
OFF: Knee function is turned OFF
MANU: Knee function is adjustable with
menu.
AUTO: Auto knee function is executed.
WHITE CLIP: White clip operation set-
ting.
With it ON, white clip is effective. 
						

							23
   R/B GAIN
   R GAIN               :+000
   B GAIN               :+000°°°°
   DTL
   DTL                  :ON
   TOTAL DTL LVL        :+00
   H DTL LVL            :11
   CRISP                :02
   LVL DEPENDENT        :2
   PEEK FREQUENCY       :10
   KNEE APERTURE        :ON
   KNEE APA.LVL         :10
   SLIM DTL             :OFF
   DTL(+)               :+00
   DTL(-)               :+00
   DTL CLIP             :0
   DTL SOURCE           :(B+G)/2 °° °°
Setting of Menu Items
!Maintenance menu
4Gain adjustment menu
The gain of R, B GAIN is adjusted.
The difference from the state of being
white-balanced can be adjusted.
≥The numeral value displayed after nor-
mal ending of AWB is “0” for both of R,
B.
5Detail adjustment menu
DTL: Setting of valid/invalid of detail func-
tion.
TOTAL DTL LVL: Horizontal and verti-
cal detail level adjustment.
H DTL LVL: Horizontal DTL component
is adjusted independently of DTL ad-
justed by TOTAL DTL.
CRISP: It functions to eliminate slight
detail component and to reduce the noise
level.
LVL DEPENDENT: It suppresses the de-
tail of low brightness level.  The bright-
ness level to be suppressed is adjusted
here.
PEAK FREQUENCY: It lifts up the detail
component, and selects the central fre-
quency.
KNEE APERTURE: It functions to em-
phasizes the detail component of the por-
tion with knee applied.
KNEE APA.LVL: It sets the degree of
knee aperture.
SLIM DTL: It validates the function of
slimming the portion where the detail is
thick and emphasized. 
						

							24
   DTL
   DTL                  :ON
   TOTAL DTL LVL        :+00
   H DTL LVL            :11
   CRISP                :02
   LVL DEPENDENT        :2
   PEEK FREQUENCY       :10
   KNEE APERTURE        :ON
   KNEE APA.LVL         :10
   SLIM DTL             :OFF
   DTL(+)               :+00
   DTL(-)               :+00
   DTL CLIP             :0
   DTL SOURCE           :(B+G)/2 °° °°
   GAIN,AUTO IRIS
   LOW GAIN             :0dB
   MID GAIN             :9dB
   HIGH GAIN            :18dB
   A.IRIS LVL           :082
   A.IRIS PEAK/AVG      :075
   A.IRIS WINDOW        :NORM1
   IRIS MODE            :LENS
   IRIS GAIN            :06°° °°
Setting of Menu Items
!Maintenance menu
5Detail adjustment menu (continued
from previous page)
DTL (i): Setting of DTL at the edge in
positive direction.
DTL (j): Setting of DTL at the edge in
negative direction.
DTL CLIP: Setting of clip level of DTL
edge.
DTL SOURCE: Setting of video source
[G, R, (3G+R) /4, (2G+R+B) /4, (G+B/2)]
to create the detail.
6 Master gain, auto iris setting menu
LOW GAIN: LOW setting of master gain.
MID GAIN: MID setting of master gain.
HIGH GAIN: HIGH setting of master gain.
≥The above GAIN setting is able to set -
6 to + 18 dB in 3 dB step.
A.IRIS LVL: Setting of the intended con-
vergence level of auto iris.
A.IRIS PEAK/AVG: Setting of the detec-
tion ratio of peak value and average value
of the quantity of light when auto iris is
operated.
A.IRIS WINDOW: Setting of the detect-
ing position of auto iris.
IRIS MODE: Auto iris mode setting:
(LENS/CAM).
IRIS GAIN: Iris  loop gain adjustment. 
						

							25
   S GAIN 1
   TOTAL GAIN           :62dB
   ANLG GAIN            :36dB
   PIX MIX              :06dB
   V MIX                :OdB
   FRAME MIX            :20dB
   H DTL LVL            :00
   CRISP                :0
   LEVEL DEPENDENT      :5
   PEAK FREQUENCY       :2
   M GAMMA              :0.45
   MASTER PED OFFSET    :-043
   R PED OFFSET         :-046
   B PED OFFSET         :-045°° °°
°
H FRAME MODE
 
  1.SCAN REVERSE        :OFF ° °
Setting of Menu Items
7Super gain, Detail, Pedestal-offset
level setting menu
TOTAL GAIN: Total gain in analog, pixel
addition, and memory addition is dis-
played.
ANLG GAIN: Gain setting in analog.
PIX MIX: Gain setting in horizontal pixel
addition.  Capable of setting 0/6 dB.
V MIX: Gain setting in vertical pixel addi-
tion.  Capable of setting 0/6 dB.
FRAME MIX: Gain setting in memory ad-
dition.  Capable of setting 0/6/12/15/20
dB.
H DTL LVL: DTL level setting of super
gain.
CRISP: Setting the function of reducing
noise level of super gain.  It is invalid
when DTL level is “0.”
LEVEL DEPENDENT: Setting of DTL
suppression at low lighting intensity of
super gain.
PEAK FREQUENCY: Setting of DTL
boost frequency of super gain.
M GAMMA: Gain setting in super gain.
Capable of setting 0/6 dB.
MASTER PED OFFSET: Setting of mas-
ter pedestal offset of super gain 1.
R PED OFFSET: Setting of R pedestal
offset of super gain.
B PED OFFSET: Setting of B pedestal
offset of super gain.
!Maintenance menu
8Setting menu in frame mode
SCAN REVERSE: Capable of changing
the right and left pictures, the top and bot-
tom pictures with each other, respectively.
(Super gain 1, 2, 3 are same menu.) 
						

							26
Setting of Menu Items
!Maintenance menu
9Color correction 1 menu
Adjustment of gain (saturation) and phase
of each color. < COLOR CORRECTION1 >
            SAT   PHASE
    R       +00    +00
    Mg      +00    +00
    B       +00    +00
    Cy      +00    +00
    G       +00    +00
    Y1      +00    +00
 < COLOR CORRECTION2 >
            SAT   PHASE
   R - Mg   +00    +00
  Mg - B    +00    +00
   B - Cy   +00    +00
  Cy - G    +00    +00
   G - Y1   +00    +00
  Y1 - R    +00    +00qZColor correction 2 menu
Adjustment of gain and phase of matrix. 
						

							27
   SETTING
   1.MODE
   2.SHUTTER
   3.H.PHASE°° °°
   MODE
 
   BLACK STRETCH        :OFF
   D5600K               :OFF
   ANLG OUTPUT SEL      :YPbPr
   CABLE COMPE          :0m
   SUP GAIN             :OFF
   CAM ID               :BAR
   CAM ID POSI          :0
   COLOR CORRECTION     :OFF°° °°
Setting of Menu Items
@Setting menu
-Menu for various settings.
1Camera mode setting menu
BLACK STRETCH: Setting of the func-
tion of expanding low-brightness analog
video level.
It is set by ON/OFF.
D5600K: It is able to make color tempera-
ture correction of about 5600 degrees of
electric color temperature correcting file.
It is set by ON/OFF.
ANLG OUTPUT SEL: Video output
YPbPr/RGB is changed over.  It is usu-
ally set to YPbPr.
CABLE COMPE: Setting of video cable
compensation.  It is able to set 0/25/50m.
SUP GAIN: It sets OFF/1/2/3 of MAX
GAIN.
CAM ID: Setting of camera ID display.
It is set by OFF/BAR/ON.
In BAR setting, CAM ID is displayed only
in BAR mode.
CAM ID POSI: It sets the display posi-
tion of camera ID.
0: top left, 1: top right, 2: down left, 3:
down right.
COLOR CORRECTION:Setting of ma-
trix ON/OFF. 
						

							28
   SHUTTER
   SHUTTER MODE         :OFF
   SHUTTER SPEED        :1/100
   SYNCHRO SCAN         :75.1°° °°
   H.PHASE
   H.PHASE-COARSE       :09
   H.PHASE-FINE         :40 °° °°
Setting of Menu Items
@ Setting menu
3Horizontal phase adjustment menu for
external reference signal
H.PHASE-COARSE: It is able to set the
horizontal phase in 15¨ step.
H.PHASE-FINE: Setting of 1-step fine
adjustment in the above phase adjust-
ment. 2Electronic shutter setting menu
SHUTTER MODE: It selects the shutter
operation.  ON/SYNCHRO/OFF can be
selected.
ON #
 Setting of normal discrete shutter
speed.
SYNCHRO #
 Setting of synchro scan
mode.
SHUTTER SPEED: Setting of normal
shutter speed.
SYNCHRO SCAN: Setting of synchro
scan mode.
Shutter speeds of 60 Hz to 120 Hz can
be continuously changed. 
						

							29
°°  CAM ID
ID:AKHC900°°
H FILE MENU
   FILE                 :USER1
   SAVE FILE?           :USER1
   SAVE                 :°°
H FILE MENU
   FILE                 :USER1
   SAVE FILE?           :USER1
   SAVE                 :°°
Setting of Menu Items
#Camera ID setting menu
$File managing and renewing menu
- File operation menu
     : blinking display.
1The file selected by FILE is loaded.
It can be selected from [PRESET/
USER1 / USER2 /CURRENT].
When desired to return to the previ-
ous data after loading other file, se-
lect “CURRENT.” 
						

							30
H FILE MENU
   FILE                 :USER1
   SAVE FILE?           :USER1
   SAVE                 :   °
  FILE MENU
   
   FILE                 :USER1
   SAVE FIL?            :USER1
   SAVE IN USER1.OK?
   YES
   NO°°
  FILE MENU
   
   FILE                 :USER1
   SAVE FIL?            :USER1
   SAVE IN USER1.OK?
   SAVE COMPLETE°°
Setting of Menu Items
$File managing and renewing menu
-File operation menu (continued)
2When saving the current data, two files
(USER1 /USER2) can be saved.
Select the file by “SAVE FILE?”
Select “USER1” and move the cursor
to SAVE and press the MENU key,
then the item menu is displayed.
3SAVE IN USER1. OK?
“YES” and “NO” are displayed.
Move the cursor from “NO” to “YES”
and check that “YES” blinks.
4When the menu key is pressed, “SAVE
COMPLETE” appears, then “SAVE” of
the file is completed.