Home
>
Panasonic
>
Digital Camera
>
Panasonic 720p Multi Purpose Digital Camera Ak Hc900p Operating Instructions
Panasonic 720p Multi Purpose Digital Camera Ak Hc900p Operating Instructions
Here you can view all the pages of manual Panasonic 720p Multi Purpose Digital Camera Ak Hc900p Operating Instructions . The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 1
Before attempting to connect, operate or adjust this product, please read these instructions completely and save this manual for future use. Model AK-HC900P 720P Multi-purpose Digital Camera
Page 2
2 FCC Note: This device complies with Part 15 of the FCC Rules. To assure continued compliance follow the attached instal- lation instructions and do not make any unauthorized modifications. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are de- signed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses,...
Page 3
3 CONTENTS For Your Safety ................................ 2 Preface ............................................. 4 Features ........................................... 4 Precautions ...................................... 5 Major Operating Controls and Their Functions ......................... 6, 7 How to Install .................................... 8 _How to set the lens .................... 8 _How to install on the camera housing, pan/tilt head, tripod, etc. .................................. 8 How...
Page 4
4 Preface Thank you very much for purchasing the multi-purpose digital camera. New 2/3q 1 million-pixel CCD is employed. [1280(H) k720(V)] ≥1 million-pixel CCD is 2/3q in size, being compact and light-weight. The camera section is equipped with a high picture quality digital signal pro- cessing LSI. ≥ 10 Bit, 74 MHz high picture quality digital processing after the process circuit. ≥ New type CCD flaw correcting function. ≥High reliability, multi-function, and im- provement of maneuverability are real-...
Page 5
5≥Refer any servicing to qualified service personnel. ≥Handle the camera with care. ≥Protect the precision made lens by plac- ing the lens cap over when the camera is not in use. If the lens is not installed, pro- tect the surface of the prism by placing the body cap into the lens mount hole. ≥Use a mild blower or lens cleaning tissue designed for coated lenses, to clean the surface of the lens or prism in the event that it should become dirty. ≥Use a dry cloth to clean the camera if it is dirty. In case...
Page 6
6 Major Operating Controls and Their Functions _Front Panel _Top and Bottom Panels 5Cooling Fan ≥Do not block or obstruct the ventilation during operation. It may otherwise cause inter- nal heating or fire. ≥The life of this fan is approximately 50,000 hours (at room temp. 25eC). Replace the fan as needed. (When the room temperature is higher than 35eC, replace the fan earlier.) Be sure to ask the dealer for the replacement. 3 4 1 2 LENS 5 6 6 7 1 2 3 4 5 6 789 10 11 12 Pin No. 1 2 3 4 5 6 Signal...
Page 7
7 8Breaker [BREAKER] If the breaker is operated due to over-current or the like, check the cause and eliminate the trouble, then press the breaker button. 9Zoom/Focus Connector [ZOOM/FOCUS] Used to connect the zoom/focus control cables of lens. 6Camera mounting hole (1/4-20UNC) 7Camera mounting hole (3/8-16UNC) The screw holes can be used to secure the camera for installing it on camera housing, and when using a pan/tilt head or a tripod. Major Operating Controls and Their Functions _Side Panel :SDI...
Page 8
8 BREAKER ZOOM/ FOCUS SDI OUT1 2 1 /F720PROGRESSIVE How to Install _How to set the lens ≥Standard 2/3q bayonet type (B4 mount) lens of any makers can be used*. 1Turn the lens fixing ring knob counterclockwise to remove the lens mount cap. 2Set the lens in place, and turn the lens fixing ring knob clockwise to precisely fix the lens. 3Connect the lens cable to the lens connector. 4Connect the remote (zoom/focus control) cable to the zoom/focus connector on the rear panel. * Note that there are some lenses...
Page 9
9 O I BREAKER ZOOM/ FOCUS SDI OUT1 2 1 /F AK-HC900P YPbPr D-sub 15-pin D-sub 15-pin How to Set Up the System (Connection) _Connection of remote control box ≥Use multi-cable for the connection of HD controller AK-HRP900 and this unit. HD-SDI Multi-cable (5m) AK-HDMLTCA05Coaxial Cable (5C-FB) HD Monitor * 1 To be sold in September 2002 1Before connecting the cables, be sure to set the Power Switch of AC Adaptor and HD Controller to OFF. 2Connect the multi-cable to the interface connector of the camera,...
Page 10
10 O I BREAKER ZOOM/ FOCUS SDI OUT1 2 1 /F HD-SDI D-sub 15-pin D-sub 15-pin Multi-cable (5m) AK-HDMLTCA05Coaxial Cable (5C-FB) AC Adaptor AW-PS505 HD Controller AK-HRP900* 1 HD Monitor Multi-purpose Digital Camera Control System Configuration 1 Remote controllable lensMulti-purpose Digital Camera AK-HC900P *1 To be sold in September 2002 External sync signal (3 value sync) Remote (zoom/focus control) cable DC Power Cable