Panasonic 58ghz Cordless Phone Manual

Programming
21
Programming using the direct commands
1
{MENU} i {#}
2Enter the desired feature code.
3Enter the desired setting code. i {Save}
LThis step may vary depending on the feature being programmed.
LTo exit the operation, press {OFF}.
Note:
LIn the following table, < > indicates the default settings.
FeatureFeature 
codeSetting codeSystem 
setting*1Page
Auto talk
*2{2}{0}{0}{1}: On {0}: –14
Date and time{1}{0}{1}–r13
Deregistration{1}{3}{1}––38
Dial lock{2}{5}{1}–r16
HS 
registration
(Handset...

Programming
22
*1 If “System setting” column is checked, you do not need to program the same item 
using another handset. (KX-TG4312)
*2 If you subscribe to Caller ID service and want to view the caller’s information after 
lifting up the handset to answer a call, turn off this feature.
*3 Turn this feature off if you prefer not to hear key tones while you are dialing or 
pressing any keys, including confirmation tones and error tones.
*4 If you select one of the melody ringer tones, the ringer tone will...

Programming
23
Special instructions 
for programmable 
settings
Night mode
Night mode allows you to select a span 
of time during which the handset will not 
ring for outside calls. This feature is 
useful for instances when you do not 
want to be disturbed, for example, while 
sleeping. Night mode can be set for each 
handset.
Important:
LSet the date and time beforehand 
(page 13).
LIf you have set the alarm, the alarm 
sounds even if the night mode is 
turned on.
Setting the start and end time
1{MENU}...

Programming
24
LIf you select “Once”, the setting 
changes to “Off” after the alarm 
sounds.
LWhen the ringer volume for outside 
calls is set to off (page 21), the alarm 
sound is heard at a low level.
TG4311BX.book  Page 24  Monday, November 10, 2008  9:32 AM 

Caller ID Service
25
Using Caller ID service
Important:
LThis unit is Caller ID compatible. To 
use Caller ID features, you must 
subscribe to Caller ID service. Contact 
your service provider/telephone 
company for details.
Caller ID features
When an outside call is being received, 
the phone number is displayed.
Caller information for the last 50 callers 
is logged in the caller list from the most 
recent call to the oldest.
LIf the unit cannot receive caller 
information, the following is displayed:...

Caller ID Service
26
2Press {V} to search from the most 
recent call, or {^} to search from the 
oldest call.
3To call back, press {C}.
To exit, press {OFF}.
Note:
LIf the item has already been viewed or 
answered:
–“Q” is displayed. (KX-TG4311)
–“Q” is displayed, even if the item 
was viewed or answered using 
another handset. (KX-TG4312)
LIf an arrow “→” is displayed after the 
number, the whole phone number is 
not shown. Press {>} to see the 
remaining numbers. To return to the 
previous display,...

Caller ID Service
27
LIf there is name information for the 
caller, go to step 5.
4Enter the name (16 characters max.; 
page 17). i {Next} i {Save}
5{OFF}
TG4311BX.book  Page 27  Monday, November 10, 2008  9:32 AM 

Voice Mail Service
28
Voice mail service
Voice mail is an automatic answering 
service offered by your service 
provider/telephone company. After you 
subscribe to this service, your service 
provider/telephone company’s voice 
mail system answers calls for you when 
you are unavailable to answer the phone 
or when your line is busy. Messages are 
recorded by your service 
provider/telephone company, not your 
telephone. Please contact your service 
provider/telephone company for details 
of this...

Intercom/Locator
29
Intercom
Intercom calls can be made between 
handsets.
Note:
LIf you receive an outside call while 
talking on the intercom, you hear 2 
tones.
To answer the call with the handset, 
press {OFF}, then press {C}.
LWhen paging a unit for an intercom 
call, the paged unit beeps for 1 
minute.
Making an intercom call
1
{INTERCOM}
LTo stop paging, press {OFF}.
2When you finish talking, press 
{OFF}.
Answering an intercom call
1
Press {C} to answer the page.
2When you finish talking, press...

Intercom/Locator
30
Handset locator
You can locate a misplaced handset by 
paging it.
1Base unit:
{LOCATOR}
LThe handset beeps for 1 minute.
2To stop paging:
Base unit:
Press {LOCATOR}.
Handset:
Press {OFF}.
Note:
LWhen the ringer volume for outside 
calls is set to off (page 21), the 
handset rings at a low level for paging.
TG4311BX.book  Page 30  Monday, November 10, 2008  9:32 AM