Panasonic 42" Class 1080p Lcd Hdtv Tc 42ld24 Operating Instructions

							11
 
 Press to return to 
the previous screen
Auto channel setup (ANT/Cable setup) Select the connected Antenna in terminalANT/Cable setupStep 3 of 6
Select “Not used” when viewing TV via
Satellite receiver or Cable box. Note: Select
“Cable” when viewing via Cable DTA Box.
CableAntenna Not used
ANTENNA
Cable In
ANTENNACable In
OK
RETURN
Select
 select
 OK
Not used: Go to  (Label 
inputs)
Select “Not used” when no wire is connected to the “Antenna/Cab\
le” terminal.  Typical when a Cable/Satellite box is connected to a TV input.  Prevents accidental tuning to an unavailable signal.
 Select “Start”Auto program
Step 4 of 6
Start scanning for channels via the TV’s
built-in tuner. Select “Skip” when viewing TV
channels via Satellite receiver or Cable box.
StartSkip
OK
RETURN
Select
 select
 OK
Skip: Go to  (Label inputs)
Start scanning the channels 
(Available channels are automatically set.)
Auto programProgressNumber of analog channels
Number of digital channels
Press RETURN to quit
8%10
0
RETURN
 Complete the Auto program setup Completion message is displayed when the Auto program scan is successfully 
completed.
Auto program
Auto program completed. Press OK to continue.
Number of analog channels
Number of digital channels10
0
OK
RETURN
OKIf there is no available 
channel, return to  -  
(ANT/ Cable setup).
“Not used” will be selected.
 Operation of the EXIT button during “First time setup”
Press the button once to display confirmation screen. Press again to clo\
se 
confirmation screen.
[EXIT confirmation screen]
Are you sure you want to exit the First Time Setup?
To repeat the First Time Setup, select“First time setup” in the Setup Menu.Ye s NoYes  Exit “First time setup”  
No  Return to the original screen.
UD@-@ME@FOH@›@JOEC


 UD@-@ME@FOH@›@JOEC


 






 
						

							12
Note
 About broadcasting systems
 Analog (NTSC):
     Conventional 
broadcasting
 Digital (ATSC):
     New 
programming 
that allows 
you to view 
more channels 
featuring 
high-quality video 
and sound
Select the Input labels (Label inputs) 
Select NEXT then press OK to go to the next step.Label inputs
Step 5 of 6
Press RIGHT to select a label for each input.
Example: DVD, Blu-ray, etc. or “Not used”. 
Press OK to customize the label.Edit
Blu-ray, DVD ...
HDMI HDMI
RETURN
ChangeSelect HDMI 3
Component
Video 1
Video 2
PC
Next HDMI 1
HDMI 2
ABC
Delete
abcRGBY
[email protected] - ,LAST
 select
 setorOK
RETURN
Select
ABC
Delete
abcRGBY
1 @.4 GHI7 PQRS2ABC5 JKL8 TUV3 DEF6 MNO9 WXYZ0 - ,LAST
Blu-rVideo 2
NEXTGAGA
Follow the instructions on 
screen to complete the 
following operations.
Label:  [BLANK] Not used/Blu-ray/DVD/DVD REC/HOME THTR/GAME/COMPUTER/
VCR/CABLE/SATELLITE/DVR/CAMERA/MONITOR/AUX/RECEIVER/MEDIA 
CTR/MEDIA EXT/OTHER
Adjust the Clock (Set clock) 
Select NEXT then press OK to go to the next step.Step 6 of 6
Edit
RETURN
ChangeSelect09
Set clock--
----
--
--Day
Hour
Minute
Next Year
Month
Current year.
 select
 setOK
RETURN
Select09 
10Minute
Next10or
Follow the instructions on 
screen to complete the 
following operations.
Complete the First time setup 
Completion message is displayed when you have successfully completed the\
 
First time setup.
OK
RETURN
Setup is complete. Enjoy your  Panasonic VIERA TV.
Press OK to exit.
First Time Setup (Continued)
UD@-@ME@FOH@›@JOEC


 UD@-@ME@FOH@›@JOEC


 






 
						

							13
Various menus allow you to make settings for the picture, sound, and othe\
r functions so that you can enjoy 
watching TV best suited for you.
 Press to exit from a menu screen
 Press to return to the previous 
screen
 
Display the menu
  Shows the functions that can be adjusted.  Some functions will be disabled depending on  the type of input signal.
Edit
RETURN
ABC Delete
abc
Menu
RGBY
[email protected] - ,LASTChangeSelect
Select or enter the name of the device
connected to the HDMI 1 terminal.
Input labels
HDMI 2
HDMI 3
Video 1
Video 2
PC HDMI 1
Component
Menu structure
Menu bar
Press OK to move to the Menu items.
Menu items
Press OK to proceed to the next 
screen if available.
Help information
Operation guide
(example: Input labels)
Select the menu
Custom
Menu
20
Picture 1/2
Picture mode
Back light
0
Contrast Reset to defaults
 select
 next
Select the item
Custom
Menu
Resets all picture adjustments to factory
default settings except for “Advanced
picture”.
0
0
0
0
0
20
Picture
1/2
Brightness
Color
Tint
Sharpness Picture mode
Back light
Contrast Reset to defaults
(example:  Picture menu)
select
Adjust or select
Vivid
Menu
Selects from preset picture modes.
200
0
0
0
0
Picture1/2
Brightness
Color
Tint
Sharpness Picture mode
Back light
Contrast Reset to defaults
(example:  Picture menu)
adjust
or 
select
How to Use Menu Functions
UD@-@ME@FOH@›@JOEC


 UD@-@ME@FOH@›@JOEC


 






 
						

							14
How to Use Menu Functions
 Menu list
MenuItem Adjustments/Configurations (alternatives)
Picture
Reset to defaults*Resets all picture adjustments to factory default settings except for “\
Advanced picture”.
Picture modeBasic picture mode (Vivid/Standard/Cinema/Game/Custom)
Back lightAdjusts the luminance of the back light.
Contrast, Brightness,
Color, Tint, SharpnessAdjusts color, brightness, etc. for each picture mode to suit your taste
• Display range
  Contrast/Brightness/Color/Sharpness: 0 - 100
  Tint:         -50 - +50
Color temp.Selects a choice of Cool (blue), Normal, or Warm (red) color.  (Cool/Normal/Warm)
A.I. pictureControls dark areas without affecting the black level or brightness in the overall picture 
(Off/On) 
C.A.T.S.Adjusts the brightness and gradation according to the ambient lighting c\
ondition.  (Off/On)
Video NRReduces noise, commonly called snow. Leave it off when receiving a strong signal.  (Off/On)
Aspect adjustmentsScreen formatChanges the format (aspect ratio). (FULL/H-FILL/JUST/4:3/ZOOM)
Lets you choose the aspect depending on the format of received signal.
HD size
Selects between 95 % (Size 1) or 100 % (Size 2) for the scanning are\
a with High-definition 
signal. (Size 1/Size 2)
Select “Size 1” if noise is generated on the edges of the screen.
• Size 1: Selected item for “HD size”. Scanning 95 %
• Size 2: Selected item for “HD size”. Scanning 100 %
H sizeAdjusts the horizontal display range to reduce noise of both side edges \
of an image.  (Size 1/Size 2)Size 2: Adjusts the image size according to the aspect mode for to reduce noise.\
Zoom 
adjustmentsAdjusts vertical alignment and size when aspect setting is “ZOOM”
PC adjustmentsSets PC display
Advanced picture3D Y/C filter Minimizes noise and cross-color in the picture. (Off/On) 
Color matrixSelects image resolution of component-connected devices  (SD/HD)
• SD:  Standard Definition       HD:  High Definition
• Only used with 480p video signal.
MPEG NRReduces noise of specific digital signals of DVD, STB, etc. (Off/On)
120HzImproved moving picture quality by reducing motion blur. (Off/Weak/Strong) 
Black levelSelects Dark or Light. Valid only for external input signals.  (Dark/Light)
3:2 pulldownAdjusts the picture recorded in 24 fps for optimum quality. (Off/On/Auto)
Audio
Reset to defaults*Resets Bass, Treble, and Balance adjustments to factory default settings.
BassIncreases or decreases the bass response.
TrebleIncreases or decreases the treble response.
BalanceEmphasizes the left / right speaker volume.Advanced audioSurroundEnhances audio response when listening to stereo. (Off/On)
Volume levelerMinimizes volume disparity after switching to external inputs.
TV speakersSwitches to “Off” when using external speakers (Off/On)
• “Surround” and “Volume leveler” do not work if “Off” is selected.
HDMI 1 in
HDMI 2 in
HDMI 3 inThe default setting is “Digital” for the HDMI connection. (Digita\
l input signal) 
Select audio input terminal when DVI cable is connected. (Analog audio \
input signal)
(Digital/Component/Video 1/Video 2)
TimerSleep, Timer 1-5The TV can automatically turn On/Off at the designated date and time
LockLocks the channels and programs.Closed 
caption
Closed captionDisplays subtitles (Closed caption).
  In the AV mode, the Audio and Setup menus give fewer options.
 *  Confirmation screen is displayed. Select “Yes” and press OK to reset.
UD@-@ME@FOH@›@JOEC


 UD@-@ME@FOH@›@JOEC


 






 
						

							15
(Continued)
 Menu list
MenuItem Adjustments/Configurations (alternatives)
Setup
Channel surf modeSets the mode to select the channel with the Channel up/down button.
(All/Favorite/Digital only/Analog only)
• Favorite: Only channels registered as FAVORITE.
LanguageSelects the screen menu language.
ClockAdjusts the clock.
ANT/Cable setupSets channels.
Input labelsSelects the terminal and label of the external equipment.
VIERA Link settingsVIERA LinkControls the equipment connected to HDMI terminals  (Off/On)
• “Power off link”, “Power on link”, “Energy saving mode”, “Unsel\
ected device energy save” 
and “Default speakers” cannot be selected if “Off” is set.
Power on linkSets “Power on link” of the HDMI connected equipment  (No/Yes)
Power off linkSets “Power off link” of the HDMI connected equipment (No/Yes)
Energy saving 
modeSets “Energy saving mode” of the HDMI connected equipment.  (Quick start/Save)
Unselected 
device energy 
saveSets “Unselected device energy save” of the HDMI connected equipme\
nt.
(No (stay on)/Yes (with prompt)/Yes (no prompt))
Default speakersSelects the default speakers (TV/Theater)
ECO/energy saving
Power saveReduces screen brightness to lower power consumption. Eye-friendly for v\
iewing in a dark 
room. (Standard/Saving)
No signal for 10 
minutes
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION 
continue for more than 10 minutes.  (Stay on/Power TV off)
Note
• Not in use when “Auto power on”, “On/Off Timer” or “Lock” is set, or while “SD mode” or 
“Digital Channel” is selected.
• “No signal for 10 minutes was activated” will be displayed for abo\
ut 10 seconds when 
the TV is turned on for the first time after the power was turned off by “No signal for 10 
minutes”.
• The on-screen display will flash 3, 2 and 1 to indicate the last three (\
3) remaining minutes 
prior to the shut-off.
No activity for 3 
hours
To conserve energy, the TV automatically turns off when no operation of remote and side 
panel key continues for more than 3 hours.  (Stay on/Power TV off)
Note
• Not in use when “Auto power on” or “On/Off Timer” is set, or while “PC input” is selected.
• “No activity for 3 hours was activated” will be displayed for abou\
t 10 seconds when the TV 
is turned on for the first time after the power was turned off by “No activity for 3 hours”.
• The on-screen display will flash 3, 2 and 1 to indicate the last three (\
3) remaining minutes 
prior to the shut-off.
Advanced  setup
Auto power onTurns TV On automatically when the cable box or a connected device is turned O\
n  (No/Yes)
TV AC cord must be plugged into this device. TV comes on every time the power is restored.
• The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto \
power on” is set.
Image viewer 
auto playSet “Thumbnail” or “Slideshow” to play back SD cards automat\
ically. 
(Slideshow/Thumbnail/Set later/Off)
First time setupRestart first time setup from “Language” setting.
AboutDisplays TV version and software license.
Reset to defaultsPerforming Reset will clear all items set with Setup, such as channel se\
ttings.
 Sub menu list
Menu Item Adjustments/Configurations (alternatives)
Setup 
SUB MENUChannel surf modeSets the mode to select the channel with Channel up/down button. 
(All/Favorite/Digital only/Analog only)
Set favoriteSets favorite channels.
Edit CH captionChanges the station identifier.
Signal meterChecks the signal strength if interference or freezing occurs on a digit\
al image.
UD@-@ME@FOH@›@JOEC


 UD@-@ME@FOH@›@JOEC


 






 
						

							16
FA Q
Before requesting service or assistance, please follow these simple guid\
es to resolve the problem.
If the problem still persists, please contact your local Panasonic deale\
r or Panasonic Service Center for assistance.
For additional assistance, please contact us via the website at: 
www.panasonic.com/contactinfo
www.panasonic.ca
White spots or 
shadow images 
(noise)
  Check the position, direction, and connection of the antenna.
Interference or 
frozen digital 
channels
(intermittent sound)
  Change the direction of antenna for digital channels.
  Check “Signal meter”. If the signal is weak, check the 
antenna and consult your local 
dealer.
The LCD panel moves 
slightly when it is 
pushed with a finger. 
A clattering sound 
might be heard
This is not a malfunction.
  There is some looseness around the panel to prevent damage to the 
panel.
The remote control does 
not work
 Are the batteries installed correctly? Are the batteries new?
Pictures from external 
equipment are distorted when 
the unit is connected via HDMI
 Is the HDMI cable connected properly? Turn Off the TV unit and equipment, then 
turn them On again.
 Check an input signal from the equipment. Use equipment compliant with 
EIA/CEA-861/861B.
When the channel is 
changed on an STB that 
is connected with HDMI, 
“HDMI” may be displayed on 
the top left of the screen
 This is not a malfunction.
Recording does not 
start immediately
 Check the settings of the recorder. For 
details, read the manual of the recorder.
UD@-@ME@FOH@›@JOEC


 UD@-@ME@FOH@›@JOEC


 






 
						

							17
ProblemActions
Screen
SoundOther
If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry \
out the 
suggested check. If this does not solve the problem, please contact your\
 local Panasonic dealer, quoting the model 
number and serial number (both found on the rear of the TV).
Some spots remain 
bright or dark
  The LCD panel is made up of a few million pixels and is 
produced with advanced technology through an intricate 
process. Sometimes a few pixels may be bright or dark. 
These pixels do not indicate a defective panel and will 
have no impact on the performance of the TV.
Chaotic image, noisy Check nearby electrical products.
(car or motorcycle ignition systems, fluorescent lamp, etc.)
No image is 
displayed on screen  Check Picture menu  Check the cable connections.  Check that the correct input has been selected.
Only spots are displayed 
instead of images  Check the channel settings.  Check the antenna cables.
Neither image nor
sound is produced
  Is the power cord plugged into the outlet?  Is the TV unit turned On?  Check Picture menu and volume.  Check the AV cable connections.  Check that the correct input has been selected.
Black Box appears  Change settings of Closed caption (CC).
No sound is produced
  Are the speakers’ cables connected correctly?  Is “Sound Mute” active?  Is the volume set to the minimum?  Is “TV speakers” set to “Off”?  Change “SAP” settings.  Check “HDMI 1 in”, “HDMI 2 in” or “HDMI 3 in” settings\
.
Sound is unusual
  Set “SAP” setting to “Stereo” or “Mono”.  Check the HDMI device connected to the unit.  Set the audio setting of the HDMI device to“Linear PCM”.
  If digital sound connection has a problem,select analog sound connection.
Unknown sound heard
1-  Sounds from TV 
cabinet
2- Tick/Click sound
3- Buzzing sound1- Changes in the temperature and humidity of the room may cause 
the TV’s cabinet to expand or contract and produce metallic 
sounds. This is not a sign of faulty operation or a malfunction.
2- When the TV is powered on, an electrical component in the  TV activates producing a tick/click sound. This is not a sign of 
faulty operation or a malfunction.
3- Electrical circuits are active while the TV set is on.  This is not a sign of faulty operation or a malfunction.
The main unit is hot.
  The main unit radiates heat and some of the parts may 
become hot. This is not a problem for performance or 
quality.
  Set up in a location with good ventilation.
 
Do not cover the ventilation holes of the TV with a tablecloth, 
etc., and do not place on top of other equipment.
UD@-@ME@FOH@›@JOEC


 UD@-@ME@FOH@›@JOEC


 






 
						

							18
PANASONIC CONSUMER ELECTRONICS COMPANY,
DIVISION OF:
PANASONIC CORPORATION OF NORTH AMERICA
One Panasonic Way
Secaucus, New Jersey 07094
Panasonic LCD TelevisionsLimited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials \
or workmanship, Panasonic Consumer 
Electronics Company (referred to as “the warrantor”) will, for t\
he length of the period indicated on the chart below, 
which starts with the date of original purchase (“warranty period”\
), at its option either (a) repair your product with new or 
refurbished parts, (b) replace it with a new or a refurbished equivale\
nt value product, or (c) refund your purchase price. 
The decision to repair, replace or refund will be made by the warrantor.
LCD TV CATEGORIES PARTSLABORSERVICE
Up to 42” (diagonal) 1 (ONE) YEAR1 (ONE) YEAR Carry-In
46” (diagonal) and larger On-Site
During the “Labor” warranty period there will be no charge for lab\
or. During the “Parts” warranty period, there will
be no charge for parts. 
You must carry-in your product or arrange for on-site service during the \
Limited Warranty period. If non-rechargeable 
batteries are included, they are not warranted. This warranty only applies to products purchased and serviced in the 
United States or Puerto Rico. This warranty is extended only to the original purchaser of a new produc\
t which was not 
sold “as is”. A purchase receipt or other proof of the original purchase date is requir\
ed for warranty service.
On-Site or Carry-In Service
For On-Site or Carry-In Service in the United States and Puerto Rico cal\
l 1-877-95-VIERA (1-877-958-4372).
On-site service where applicable requires clear, complete and easy access to the product by the authorized servicer 
and does not include removal or re-installation of an installed product.\
 It is possible that certain on-site repairs will not 
be completed on-site, but will require that the product or parts of the \
product, at the servicer’s discretion be removed for 
shop diagnosis and/or repair and then returned.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NO\
T COVER normal 
wear and tear or cosmetic damage, nor does it cover markings or retained\
 images on the LCD panel resulting from 
viewing fixed images (including, among other things, non-expanded stand\
ard 4:3 pictures on wide screen TVs, or 
onscreen data in a stationary and fixed location). The warranty ALSO DOES NOT COVER damages which occurred in 
shipment, or failures which are caused by products not supplied by the w\
arrantor, or failures which result from accidents, 
misuse, abuse, neglect, bug infestation, mishandling, misapplication, al\
teration, faulty installation, set-up adjustments, 
misadjustment of consumer controls, improper maintenance, power line sur\
ge, lightning damage, modification, or 
commercial use (such as in a hotel, office, restaurant, or other business), rental use of the product, servic\
e by anyone 
other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE 
USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes 
damages for lost time, cost of having someone remove or re-install an in\
stalled unit if applicable, or travel to and from the 
servicer. The items listed are not exclusive, but are for illustration only.)  ALL EXPRESS AND IMPLIED WARRANTIES, 
INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED 
WARRANTY.
Some states do not allow the exclusion or limitation of incidental or co\
nsequential damages, or limitations on how
long an implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have othe\
rs rights which vary from state to state.
If a problem with this product develops during or after the warranty per\
iod, you may contact your dealer or
Service Center. If the problem is not handled to your satisfaction, then write to the \
warrantor’s Consumer Affairs
Department at the addresses listed for the warrantor.
PARTS AND SERVICE (INCLUDING COST OF AN ON-SITE SERVICE CALL, WHERE APPLICABLE) WHICH
ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY.
Limited Warranty (for U.S.A. and Puerto Rico only)
UD@-@ME@FOH@›@JOEC


 UD@-@ME@FOH@›@JOEC


 






 
						

							19
Customer Services Directory (for U.S.A. and Puerto Rico)
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; 
purchase Parts and Accessories; or make Customer Service and Literature requests by visitin\
g our Web 
Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-877-95-VIERA (958-4372)
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
■ For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books on line for all Panasonic Products by \
visiting our Web 
Site at:
http://www.pstc.panasonic.com
or, send your request by E-mail to: 
[email protected]
You may also contact us directly at: 
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday - Friday 9\
 am to 9 pm, EST.)
Panasonic Service and Technology Company
20421 84th Avenue South,
Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)
■ For hearing or speech impaired TTY users, TTY: 1-866-605-1277
UD@-@ME@FOH@›@JOEC


 UD@-@ME@FOH@›@JOEC









 
						

							20
Limited Warranty (for Canada)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in m\
aterial and workmanship under normal use and 
for a period as stated below from the date of original purchase agrees t\
o, at its option either (a) repair your product with 
new or refurbished parts, (b) replace it with a new or a refurbished e\
quivalent value product, or (c) refund your purchase 
price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.
Viera TV (42” & over) In-home service One (1) year, parts (including panel) and labour.
Viera TV (under 42”) Carry-in service One (1) year, parts (including panel) and labour.
In-home Service will be carried out only to locations accessible by road\
s and within 50 km of an authorized Panasonic 
service facility.
In-home service requires clear, complete and easy access to the product by the Authorized Servicer and does not 
include removal or re-installation of an installed product. If removal i\
s required to service the product, it will be at the 
discretion of the Servicer and in no event will Panasonic Canada Inc. or\
 the Servicer be liable for any special, indirect or 
consequential damages.
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic 
brand product mentioned above sold by an authorized Panasonic dealer in \
Canada and purchased and used in Canada, 
which product was not sold “as is”, and which product was delivere\
d to you in new condition in the original packaging. 
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR 
OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS 
REQUIRED
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NO\
T COVER normal 
wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or 
failures which are caused by products not supplied by Panasonic Canada I\
nc., or failures which result from accidents, 
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty \
installation, set-up adjustments, misadjustment 
of consumer controls, improper maintenance, power line surge, lightning \
damage, modification, introduction of sand, 
humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or 
service by anyone other than a Authorized Servicer, or damage that is attributable to acts of God. Dry cell batteries are \
also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, 
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL 
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY 
EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to\
 and from the 
Authorized Servicer, loss of or damage to media or images, data or other memory or recorded\
 content. This list of items 
is not exhaustive, but for illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or l\
imitation of incidental or consequential damages, or 
the exclusion of implied warranties, so the above limitations and exclus\
ions may not be applicable. This warranty gives 
you specific legal rights and you may have other rights which vary depen\
ding on your province or territory.
WARRANTY SERVICE
For product operation and information assistance,  please contact: 
    Our Customer Care Centre:  1-800 #:    1-866-330-0014
           Email link: “Contact us  → email” on www.vieraconcierge.ca
For product repairs,  please contact Viera Customer Care Agent using the above contact info.
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in th\
e original carton. Include details of the defect claimed, and proof of date of original pur\
chase.
UD@-@ME@FOH@›@JOEC


 UD@-@ME@FOH@›@JOEC