Panasonic 42" Class 1080p Lcd Hdtv Tc 42ld24 Operating Instructions

							TM
Operating Instructions
42” Class 1080p LCD HDTV
(42.0 inches measured diagonally)
Manual de instrucciones
Televisión de alta definición de 1080p y 
clase 42” de LCD
(42.0 pulgadas medidas diagonalmente)
For more detailed instructions, refer to the Operating Instructions 
on the CD-ROM.
To view the Operating Instructions on the CD-ROM, you need a 
computer equipped with a CD-ROM drive, and Adobe® Reader® 
(Version 7.0 or later is recommended) installed on your computer.
Depending on the operating system or settings on your computer, the 
Operating Instructions may not start automatically.
In this case, open the PDF file under the “MANUAL” folder manually\
 to view 
the instructions.
Para obtener instrucciones más detalladas, consulte las instrucciones\
 
de manejo contenidas en el CD-ROM.
Para ver las instrucciones de manejo contenidas en el CD-ROM, se 
necesita un ordenador equipado con una unidad de CD-ROM, y que 
tenga instalado Adobe® Reader® (se recomienda la versión 7.0 o 
posterior).
Dependiendo del sistema operativo o de las configuraciones del ordenador\
, 
las  nstrucciones de manejo pueden no iniciarse automáticamente.
En tal caso, abra manualmente el archivo PDF en “MANUAL” carpeta p\
ara 
visualizar las instrucciones.
TQB2AA0580
Gracias por su decisión de comprar este producto marca Panasonic.Lea estas instrucciones antes de utilizar su televisor y guárdelas pa\
ra consultarlas en el futuro.Las imágenes mostradas en este manual tienen solamente fines ilustrat\
ivos.
Model No.
Número de modelo
TC-42LD24
Español
EnglishThank you for purchasing this Panasonic product.Please read these instructions before operating your set and retain them\
 for future reference.The images shown in this manual are for illustrative purposes only.
For assistance (U.S.A./Puerto Rico), please call: 
1-877-95-VIERA (958-4372) or visit us at www.panasonic.com/contactinfo 
For assistance (Canada), please call: 
1-866-330-0014  or visit us at www.vieraconcierge.ca
Para solicitar ayuda (EE.UU./Puerto Rico), llame al: 
1-877-95-VIERA (958-4372) ó visítenos en www.panasonic.com/contactinfo 
●  Safety Precautions .................................2
●  Accessories/Optional Accessory ............5
●  Basic Connection ...................................7
●  Identifying Controls ................................9
●  First Time Setup ...................................10
●   How to Use Menu Functions ................13
●  FAQ ......................................................16
●  Limited Warranty
(for U.S.A. and Puerto Rico only) .........18
●  

Customer Services Directory
(for U.S.A. and Puerto Rico) ................19
●  

Limited Warranty (for Canada) .............20
Please read before using the unit
Contents
UD@-@ME@FOH@›@JOEC


 UD@-@ME@FOH@›@JOEC


 






  
						

							2
ANTENNA
LEAD-IN WIRE
ANTENNA
DISCHARGE UNIT 
(NEC SECTION 810-20)
GROUNDING 
CONDUCTORS
 (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING 
ELECTRODE SYSTEM 
(NEC ART 250, PART H)
ELECTRIC 
SERVICE 
EQUIPMENT
GROUND CLAMP
EXAMPLE OF ANTENNA 
GROUNDING AS  PER 
(NEC) NATIONAL 
ELECTRICAL
CODE
Safety Precautions
Note to CATV System Installer
This reminder is provided to direct the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for 
proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding sy\
stem of the building, as 
close to the point of cable entry as practical.
Secure Ventilation
Slots and openings in the cabinet and the back or bottom are provided fo\
r ventilation, and to ensure reliable operation of the LCD 
TV and to protect it from overheating. These openings must not be blocked or covered. There should be at least 10 cm of space 
from these openings. The openings should never be blocked by placing the LCD TV on a bed, sofa, rug or other similar surface. 
This LCD TV should not be placed in a built-in installation such as a bookcase un\
less proper ventilation is provided.
Important Safety Instructions
1)  Read these instructions.
2)  Keep these instructions.
3)  Heed all warnings.
4)  Follow all instructions.
5)  Do not use this apparatus near water.
6)  Clean only with dry cloth.
7)  Do not block any ventilation openings. Install in accordance with the ma\
nufacturer’s instructions. 
8)  Do not install near any heat sources such as radiators, heat registers, \
stoves or other apparatus (including amplifiers) that 
produce heat.
9)  Do not defeat the safety purpose of the polarized or grounding-type plug\
. A polarized plug has two blades with one wider  than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are 
provided for your safety. If the provided plug does not fit into your outlet, consult an electri\
cian for replacement of the 
obsolete outlet. 
10)  Protect the power cord from being walked on or pinched particularly at p\
lugs, convenience receptacles, and  the point where they exit from the apparatus.
11)  Only use attachments / accessories specified by the manufacturer.
12)  Use only with the cart, stand, tripod, bracket or table specified by the\
 manufacturer, or sold with the  apparatus. When a cart is used, use caution when moving the cart / appar\
atus combination to avoid injury 
from tip-over.
13)  Unplug this apparatus during lightning storms or when unused for long pe\
riods of time.
14)  Refer all servicing to qualified service personnel. Servicing is require\
d when the apparatus has been damaged in any  way, such as power-supply cord or plug is damaged, liquid has been spilled \
or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, does not operate normall\
y, or has been dropped.
15)  Operate only from the type of power source indicated on the marking labe\
l. If you are not sure of the type of power supplied  to your home consult your television dealer or local power 
company.
16)  Follow all warnings and instructions marked on the LCD TV.
17)  Never push objects of any kind into this LCD TV through cabinet  slots as they may touch dangerous voltage points or short out 
parts that could result in a fire or electric shock. Never spill liquid \
of any kind on the LCD TV.
18)  If an outside antenna is connected to the television equipment,  be sure the antenna system is grounded so as to provide some 
protection against voltage surges and built up static charges. 
In the U.S. Section 810-21 of the National Electrical Code 
provides information with respect to proper grounding of the mast 
and supporting structure, grounding of the lead-in wire to an 
antenna discharge unit, size of grounding conductors, location of 
antenna discharge unit, connection to grounding electrodes, and 
requirements for the grounding electrode.
  
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
  
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service p\
ersonnel.
The lightning flash with arrowhead 
within a triangle is intended to tell the 
user that parts inside the product are a 
risk of electric shock to persons.
The exclamation point within a 
triangle is intended to tell the 
user that important operating and 
servicing instructions are in the 
papers with the appliance.
UD@-@ME@FOH@›@JOEC


 UD@-@ME@FOH@›@JOEC


 






 
						

							3
19)  An outside antenna system should not be located in the vicinity of overh\
ead power lines, other electric light, power circuits, or where it can fall into such power lines or circuits. When installing \
an outside antenna system, extreme care should be 
taken to keep from touching such power lines or circuits as contact with\
 them might be fatal.
20)  Unplug this LCD TV from the wall outlet and refer servicing to qualified service personn\
el under the following conditions:
  a.  When the power cord or plug is damaged or frayed.
  b.  If liquid has been spilled into the LCD TV.
  c.  If the LCD TV has been exposed to rain or water.
  d.  If the LCD TV does not operate normally by following the operating instructions.
       Adjust only those controls that are covered by the operating instruction\
s as improper adjustment of other 
controls may result in damage and will often require extensive work by a\
 qualified technician to restore the 
LCD TV to normal operation.
  e.  If the LCD TV has been dropped or the cabinet has been damaged.
  f.  When the LCD TV exhibits a distinct change in performance - this indicates a need for\
 service.
21) 
When replacement parts are required, be sure the service technician uses\
 replacement parts specified by the manufacturer that 
have the same characteristics as the original parts. Unauthorized substi\
tutions may result in fire, electric shock, or other hazards.
22)  WARNING:  TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING.
DO NOT PLACE LIQUID CONTAINERS (FLOWER VASES, CUPS, COSMETICS, ETC.) ABOVE THE SET 
(INCLUDING ON SHELVES ABOVE, ETC.).
23)  WARNING:  SMALL PARTS CAN PRESENT CHOKING HAZARD IF ACCIDENTALLY SWALLOWED. KEEP SMALL 
PARTS AWAY FROM YOUNG CHILDREN. 
DISCARD UNNEEDED SMALL PARTS AND OTHER OBJECTS, INCLUDING PACKAGING MATERIALS 
AND PLASTIC BAGS/SHEETS TO PREVENT THEM FROM BEING PLAYED WITH BY YOUNG CHILDREN, 
CREATING THE POTENTIAL RISK OF SUFFOCATION.
24)  CAUTION:  The Power switch on this unit will not completely shut off all power from AC outlet. Since the power cord serves 
as the main disconnect device for the unit, you will need to unplug it f\
rom the AC outlet to shut down all power. 
Therefore, make sure the unit has been installed so that the power cord \
can be easily unplugged from AC outlet 
in case of an accident. To avoid fire hazard, the power cord should also be unplugged from the AC outlet when 
left unused for a long period of time (for example, when on vacation).\
25)  CAUTION:  TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS PLUG WITH A RECEPTACLE OR OTHER OUTLET 
UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
26)  CAUTION:  USE WITH OTHER STAND MAY RESULT IN INSTABILITY POSSIBLY CAUSING INJURY.
27)  CAUTION:  DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME 
OR EQUIVALENT TYPE.
28)  CAUTION:  This LCD TV is for use only with the following optional accessory. Use with any other type of optional 
accessories may cause instability which could result in the possibility \
of injury.
(All of the following accessories are manufactured by Panasonic Corpora\
tion)
•  Wall-hanging bracket:  TY-WK3L2RWAlways be sure to ask a qualified technician to carry out set-up.
NOTE:    This equipment is designed to operate in North America and other countries where the broadcasting system and AC 
house current are exactly the same as in North America.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a\
 Class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection against harmf\
ul interference in a residential installation. 
This equipment generates, uses and can radiate radio frequency energy an\
d, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. Ho\
wever, there is no guarantee that interference will not occur 
in a particular installation. If this equipment does cause harmful inter\
ference to radio or television reception, which can be determined 
by turning the equipment off and on, the user is encouraged to try to correct the interference by o\
ne or more of the following 
measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject\
 to the following two conditions: (1) This device may 
not cause harmful interference, and (2) this device must accept any in\
terference received, including interference that may cause 
undesired operation.
FCC Caution:
To assure continued compliance, follow the attached installation instruct\
ions and use only shielded interface cables 
when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by 
Panasonic Corp. of North America could void the user’s authority to operate this device.
FCC Declaration of ConformityModel No. TC-42LD24
Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094
Contact Source: Panasonic Consumer Electronics Company 1-877-95-VIERA (958-4372)
email: [email protected]
UD@-@ME@FOH@›@JOEC


 UD@-@ME@FOH@›@JOEC


 






  
						

							4
CEA CHILD SAFETY NOTICES:  Flat panel displays are not always supported on the proper stands or
installed according to the manufacturer’s recommendations.  Flat panel displays that are inappropriately
situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and may cause
personal injury or even death.
The consumer electronics industry (of which Panasonic is a member) is committed to making home
entertainment enjoyable and safe. To prevent personal injury or death, be sure to follow the following safety
guidelines:
TUNE INTO SAFETY:
•One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use
of your flat panel display.
• Carefully read and understand all enclosed instructions for proper use of this product.
• Don’t allow children to climb on or play with furniture and television sets.
• Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.
• Remember that children can become excited while watching a program, especially on “larger than life”
flat panel displays.  Care should be taken to install the display where it cannot be pushed, pulled over,
or knocked down.
• Care should be taken to route all cords and cables connected to the flat panel display so that they
cannot be pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
• Use a mount that has been recommended by the display manufacturer and/or listed by an independent
laboratory (such as UL, CSA, ETL).
• Follow all instructions supplied by the display and wall mount manufacturers.
• If you have any doubts about your ability to safely install your flat panel display, contact your retailer
about professional installation.
• Make sure the wall where you are mounting the display is appropriate.  Some wall mounts are not
designed to be mounted to walls with steel studs or old cinder block construction.  If you are unsure,
contact a professional installer.
• A minimum of two people are required for installation.  Flat panel displays can be heavy.
The American Academy of Pediatrics discourages television viewing for ch\
ildren younger than 
two years of age.
This product incorporates the following software:
(1) software developed independently by or for Panasonic Corporation,
(2) software owned by a third party and licensed to Panasonic Corporat\
ion,
(3) software licensed under the GNU General Public License, Version 2 \
(GPL v2),
(4) software licensed under the GNU LESSER General Public License (LG\
PL) and/or,
(5) open source software other than software licensed under the GPL an\
d/or LGPL
For the software categorized as (3) or (4), please refer to the term\
s and conditions of GPL v2 and LGPL, as the 
case may be at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and\
 
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html In addition, soft\
ware categorized as (3) or (4) is 
copyrighted by several individuals and/or entities. Please refer to the \
copyright notice of those individuals at 
http://www.am-linux.jp/dl/DTV10UT/.
GPL/LGPL SOFTWARE IS DISTRIBUTED IN THE HOPE THAT IT WILL BE USEFUL, BUT\
 WITHOUT ANY 
WARRANTY, EXPRESS, IMPLIED OR STATUTORY, INCLUDING THE IMPLIED WARRANTIE\
S OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
For at least three (3) years from delivery of products, Panasonic will\
 give to anyone who contacts us at the 
address provided below, for a charge of no more than our cost of physica\
lly performing source code 
distribution, a complete machine-readable copy of the corresponding sour\
ce code covered under GPL v2/LGPL.
Contact Information
[email protected]
Source code is also freely available to you and any other member of the \
public via our website below.
http://www.am-linux.jp/dl/DTV10UT/
Safety Precautions (Continued)
UD@-@ME@FOH@›@JOEC


 UD@-@ME@FOH@›@JOEC


 






 
						

							5
Accessories/Optional Accessory
Accessories
Check you have all the items shown.
Accessories
Remote Control
Transmitter
 N2QAYB000485
Batteries for the
Remote Control
Transmitter (2)
 AA Battery
Operating Instructions (Book)
Operating Instructions (CD-ROM)
VIERA Concierge and Quick Start Guide
Installing the remote’s batteries
Open
Hook
Note the correct polarity
(+ or -). Close
Caution
  Incorrect installation may cause 
battery leakage and corrosion, 
resulting in damage to the remote 
control.
• Do not mix old and new batteries.
• Do not mix different battery types (such 
as alkaline and manganese batteries).
• Do not use rechargeable (Ni-Cd) 
batteries.
  Do not burn or break batteries.
Pedestal
  TBLX0164 (With BAG) / TBLA0540
Product Registration Card (U.S.A)
Optional Accessory
Wall-hanging bracket TY-WK3L2RW
WARNING
Please contact your nearest Panasonic dealer to purchase the recommended\
 
wall-hanging bracket. For additional details, please refer to the wall-h\
anging 
bracket installation manual.
Back of the TV
Holes for wall-hanging bracket 
installation
Screw for fixing the TV onto the 
wall-hanging bracket
(not supplied with the TV)
Depth of screw:
Minimum: 0.39” (10.0 mm)
Maximum:  0.67” (17.0 mm)
(View from the side)
7.9 ”
(200 mm)
7.9 ”
(200 mm)
  Customer assumes liability if mounting the unit themselves or if a Panas\
onic bracket is not used. Any damage resulting 
from not having a professional installer mount your unit will void your \
warranty.
  Always be sure to ask a qualified technician to perform any necessary se\
t-up. Incorrect fitting may cause equipment to fall, resulting in injury and product damage.
  Do not mount the unit directly below ceiling lights (such as spotlights\
, floodlights or halogen lights) which typically give o ff 
high heat. Doing so may warp or damage plastic cabinet parts.
  Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall  before hanging bracket.
  When using an angled-type wall hanging bracket, please ensure that there\
 is sufficient space for the connecting cables so that they do not press against the wall when the TV is tilted forward.
  For safety reasons, remove units no longer being used from their wall-mo\
unted locations. M6
How to assemble (p. 6)
UD@-@ME@FOH@›@JOEC


 UD@-@ME@FOH@›@JOEC










 
						

							6
AccessoriesAssembly screws 
(4 of each)
 
A
 XSS5+15FNK
  M5 x 15
B
 XYN4+F12FJK
  M4 × 12
Bracket (1)
 Base (1)
WARNING
Do not disassemble or modify the pedestal.
  Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
  Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
  If you use the pedestal when it is physically damaged, personal injury m\
ay result. Contact your nearest Panasonic  Dealer immediately.
During set-up, make sure that all screws are securely tightened.
  If sufficient care is not taken to ensure screws are properly tightened during\
 assembly, the pedestal will not be strong  enough to support the TV, and it might fall over and become damaged, and personal injury may res\
ult.
Location
Place the TV at a comfortable distance for viewing. Avoid placing it where sunlight or other bright light (including reflect\
ions) will 
fall on the screen. Use of some types of fluorescent lighting can reduce\
 remote control transmitter range. Adequate ventilation 
is essential to prevent an internal component failure. Keep away from ar\
eas of excessive heat or moisture.
Adjust the LCD panel 
to your desired angle.
b15° 15°a
(View from above) a: 17.8 ” (450 mm)
b: 12.2 ” (309 mm)
Note
  Ensure that the pedestal does not hang over the edge of the base even if\
 the TV swivels to the full rotation range.  Do not place any objects or hands within the full rotation range.
Attaching the pedestal to TV
■Assembling the pedestal■Set-up
   Fix securely with assembly 
 screws A. (Total 4 screws)   Tighten screws firmly.  
  Fix securely with assembly 
 screws . (Total 4 screws)
  Tighten screws firmly.
A
Bracket
Front
BaseB
B
Foam mat or thick 
soft cloth
UD@-@ME@FOH@›@JOEC


 UD@-@ME@FOH@›@JOEC


 






 
						

							7
To connect the antenna terminal
Basic Connection
Note
  Not all cables and external equipment shown in this book are supplied wi\
th the TV.  For more details on the external equipment’s connections, please refer to the operating manuals for the equipment.  For additional assistance, visit us at:   www.panasonic.comwww.panasonic.ca
ExampleConnecting Antenna (To watch TV)
Cable TV
VHF/UHF AntennaTV VHF/UHF Antenna
• NTSC (National Television System Committee):
Conventional broadcasting
• ATSC (Advanced Television Systems Committee):
Digital TV Standards include digital high-definition television (HDTV), 
standard-definition television (SDTV), data broadcasting, multi-
channel surround-sound audio and interactive television.
Cable
• You need to subscribe to a cable TV service to enjoy viewing their programming.
• You can enjoy high-definition programming by subscribing to a high-defini\
tion cable service. 
The connection for high-definition can be done with the use of an HDMI o\
r Component Video cable.
• To view high-definition programming select the correct video input. Power Cord
(Connect after all the 
other connections.)
Back of the TV
Cable TV
AC 110-127 V 60 Hz
VHF/UHF Antenna
or
UD@-@ME@FOH@›@JOEC


 UD@-@ME@FOH@›@JOEC


 






 
						

							8
High-Definition
 To use HDMI terminals
HDMI
AV OUT
e.g. Blu-ray Disc 
player
AV Equipment
 Connecting to the HDMI terminals will enable you to enjoy high-definitio\
n digital images and high-quality sound.  The HDMI connection is required for a 1080p signal.
 To use COMPONENT terminals
L
R Y
P
B
PR
COMPONENT
VIDEO OUT
AUDIO
OUT
white
red
green
blue
red
white
red
green
blue
red
white
red
green
bluerede.g. Blu-ray Disc 
player
AV Equipment
Standard-Definition
 To use COMPOSITE terminals
L
RCOMPOSITE
OUTyellow
w
hite
r
ed
yellow
white
red
yellow
white redor
e.g. DVD Recorder
AV Equipment
e.g. VCR
Note
  For more details on the external equipment’s connections, please refer to the operating manual for the equipment.
AV cable connections
Basic Connection (Continued)
UD@-@ME@FOH@›@JOEC


 UD@-@ME@FOH@›@JOEC


 






 
						

							9
Identifying Controls
TV controls/indicators
Remote control
Switches TV On or Off (Standby)
Changes the input mode
Displays Main Menu
Displays Sub Menu
Colored buttons 
(Use for various functions following
the instructions on screen.)
Volume up/down
Sound Mute On/Off
Changes aspect ratio
Switches to previously viewed channel 
or input modes
Operate the external equipment with
“VIERA Link control” function.
(Refer to the Operating Instructions
on the CD-ROM.)Closed Caption On/OffSelects Audio Mode for TV viewing
Exits from Menu screen
VIERA Link menu
Displays VIERA TOOLS
Viewing from SD Card
Selects/OK/Change
Returns to previous menu
Channel up/down
Displays or removes the channel 
banner
Operates the Favorite channel list 
function
Numeric keypad to select any channel 
or press to enter alphanumeric input in 
menus
Use for digital channels
C.A.T.S  (Contrast Automatic Tracking System)
Power indicator 
( on: red, off: no light)
Note
  The TV consumes a small amount of electric energy even when turned off.  Do not place any objects between the TV remote control sensor and remote control.
Changes the input mode
Chooses Menu and Submenu entries. Volume up/down Selects channels in sequence
Front of the TV
POWER button Menu navigations
Remote control sensor 
within about 23 feet 
(7 meters) in front of the 
TV set 
UD@-@ME@FOH@›@JOEC


 UD@-@ME@FOH@›@JOEC


 






 
						

							10
First Time Setup
or
Turn the TV On with the POWER button
or
(TV)(Remote)
Configure your viewing mode
 Select your languageLanguage / Idioma / Langue
EnglishEspañol Français select
 OK
 Select your viewing mode (Be sure to select “Home use”)Set viewing mode
Step 2 of 6
Please select your viewing environment.
Select “Home Use” when using this TV in your
home.
Home UseStore Demonstration
OK
RETURN
Select
 select
 OK
  Please confirm your selection (Home Use) before pressing OK button.
 If you select “Store Demonstration” by mistake in , 
confirmation screen will be displayed.
No
You are selecting the store demonstration mode.
If you select “Yes”, the picture mode will regularly reset
to “Vivid” and a Picture Refresh message will be displayed on the 
screen.Ye s select
 OK
  Select “No” and return to previous screen .  If you select “Yes”, Screen enters the store demonstration mode.
To display the “Set viewing mode” screen again as shown above and s\
elect 
“Home Use”, do one of the following:
• Press and hold down the side POWER button for at least five seconds\
.
• Unplug power cord for 30 seconds and plug it again.
Note
  is not available on  - .
  is not available on .
  When you have used  to turn the TV off, the next time you turn the TV on the 
“Language” settings will be displayed.
  If you use any other step other than  to turn the TV off, or if you used the EXIT 
button to quit before completing the settings, the next time you turn th\
e TV on “First 
time setup” will not be automatically displayed. 
• The settings up to that point are saved.
• You can reset the settings using “First time setup”. (p. 15)
  To change the setting (Language, ANT/Cable setup, Input labels, Clock) later, go to  the Menu screen (p. 15)
First time setup screen is displayed only when the TV is turned on for the first time after the power cord is 
inserted into a wall outlet and when “Auto power on” (p. 15) is \
set to “No”.
UD@-@ME@FOH@›@JOEC


 UD@-@ME@FOH@›@JOEC