Panasonic 39"40"50" Class 1080p Led Lcd Tv Tc 40as520 Owners Manual

							10English
  Removing the pedestal from the TV
 Be sure to remove the pedestal in the following way 
when using the wall-hanging bracket or repacking the 
TV.
 1  Remove the assembly screws 
 from the TV.
 2  Lift the TV from the pedestal.
 3  Remove the assembly screws 
 from the bracket.
 
 Warning
 Do not disassemble or modify the pedestal. ●   Otherwise, the TV may fall over and become 
damaged, and personal injury may result.
 Caution
 Do not use any pedestal other than that provided 
with this TV

.
●   Otherwise, the TV may fall over and become 
damaged, and personal injury may result.
 Do not use the pedestal if it becomes warped or 
physically damaged. ●   If you use the pedestal when it is physically damaged, 
personal injury may result. Contact your nearest 
Panasonic Dealer immediately

.
 During set-up, make sure that all screws are 
securely tightened. ●   If sufficient care is not taken to ensure screws are 
properly tightened during assembly

, the pedestal will 
not be strong enough to support the TV, and it might 
fall over and become damaged, and personal injury 
may result.
 When removing the pedestal, do not remove the 
pedestal by any methods other than the specified 
procedure. (p. 10) ●   Otherwise, the TV and/or pedestal may fall over and 
become damaged, and personal injury may result.
 
 
■ Moving the TV
 Before moving the TV, disconnect all cables.
●   Move the TV with at least two people.
●  TC-39AS530U/TC-50AS530U
 
A
C
D1
 
B
3
2
 Bottom view
  
						

							11English
 Power cord connections
●  TC-40AS520U
 Back of the  TV
 
●   TC-39AS530U/TC-50AS530U
 Back of the  TV
 
    Insert the Power Cord into the TV
 
 Power Cord  Connect after all other connections have been made.
 Insert the power cord plug (included) firmly 
into place.
 Important:●   Disconnect the power cord plug from the wall out 
first.
●   The included power cord is for use with this unit 
only

.
   Connections
 Please refer to eHELP (p. 18) for other connections 
(VIERA Link connection etc.).
 Connection Panels
 
1
2 /
5
6
4 /
3
 Back of the TV
 1 USB1/2
 2 HDMI1/2
 3  Digital audio out
 4 Component/Video terminal
 5  Antenna cable in
 6 Ethernet connector ●   For 
, ,  connections, please refer to p. 12
 
  VHF/UHF Antenna
 • NTSC (National Television System Committee): 
Analog television system
 • ATSC (Advanced Television Systems Committee): 
Digital TV Standards include digital high-definition 
television (HDTV), standard-definition television 
(SDTV), data broadcasting, multi-channel surround 
sound audio and interactive television.
  
						

							12English
  AV cable connection
 
    To use HDMI terminals
 
    (for best HD picture)
 (Set-top-box / DVD recorder / Blu-ray Disc player / 
Camcorder / etc.)
 
 
 
 HDMI cable
 
   AV Equipment (e.g. Blu-ray Disc player)
 For devices with DVI output
 
    Audio cable
 
 HDMI-DVI Conversion cable
 
   AV Equipment (e.g. Blu-ray Disc player)
    To use COMPONENT terminals
 (DVD recorder / Blu-ray Disc player / etc.)
 
  Component cable
 
   AV Equipment (e.g. Blu-ray Disc player)
 Antenna connection
 
 Back of the TV
  VHF/UHF Antenna or 
Cable TV
 Cable
●   You need to subscribe to a cable TV service to enjoy 
viewing their programming.
●   A high-definition connection can be made using an 
HDMI or Component V

ideo cable. (p. 12)
 Note
●   When using a Cable box, external equipment and 
video cables shown in this manual are not supplied 
with the 

TV.
●   For additional assistance, visit us at:
 www

.panasonic.com/support
 www.panasonic.ca/english/support 
						

							13English
 
■ About built-in wireless LAN
● 
 To use the built-in wireless LAN, using an access 
point is recommended.
●   To use the built-in wireless LAN in the access point 
mode, up to 7 devices are connectable. But the 
transfer rate will vary according to communication 
environment or connected equipments.
●   Do not use the built-in wireless LAN to connect to any 
wireless network (SSID *
1) for which you do not have 
usage rights. Such networks may be listed as a result 
of searches. However, using them may be regarded 
as illegal access.
●   Check that the Access point supports WPS *
2.
 (If it does not support WPS, the encryption key of the 
Access point is required when configuring settings.)
●   Follow the instructions on the Access point setup 
screen and configure the appropriate security 
settings.
 For more details on setting of 

Access point, please 
refer to operating manual for the Access point.
●   We recommend using 11n (5 GHz) for the wireless 
system between the built-in wireless LAN and 

Access 
point.
 Communication is also possible with 11a, 11b, and 
11g, but the communication speed may be slower.
●   If the wireless system of the Access point is changed, 
devices that could connect by wireless LAN may no 
longer be able to connect.
●   Data transmitted and received over radio waves may 
be intercepted and monitored.
●   Keep the TV away from the following devices as 
much as possible:
 Wireless LAN, microwaves, and other devices that 
use 2.4 GHz and 5 GHz signals. Otherwise, the 

TV 
failures such as malfunction may occur due to the 
radio wave interference.
●   When noises occur due to the static electricity, etc., 
the 

TV might stop operating for the protection of the 
devices. In this case, turn the TV Off with power On / 
Off switch, then turn it On again.
 * 1     SSID is a name for identifying a particular wireless 
network for transmission.
 * 2     WPS: Wi-Fi Protected Setup
    To use COMPOSITE terminals
      (for SD picture)
 (Camcorder / Game system / DVD recorder / etc.)
 
  VIDEO cable
 
   AV Equipment (e.g. Camcorder)
 Note
●   In some cases, it is not possible to connect 
depending on the type of cable or equipment.
●   The Green terminal is shared for both the 
COMPONENT

 and COMPOSITE (VIDEO IN) 
connection. When using COMPOSITE (VIDEO IN) 
connection, the Yellow connector (VIDEO) should be 
inserted into Green connection.
 Network connection
●   To enable the network service functions, you need to 
connect the 
TV to a broadband network environment. 
If you do not have any broadband network services, 
please consult your retailer for assistance.
●    Prepare the Internet environment for wired connection 
or wireless connection.
 
■ Wired connection
   TV
 Internet environment
  LAN cable (Shielded)
 
■ Wireless connection
 
 Internet 
environment
  Built-in wireless LAN
 
 Access point 
						

							14English
  
Identifying Controls
 TV controls/indicators
 
 Front of the TV 1
 2
 3
 1  Power indicator (On: red, Off: no light)
 2  C.A.T.S. (Contrast Automatic Tracking System)
 3  Remote Control sensor Maximum range for remote is 23 feet (7 meters) from 
front of TV set
 
 
 Back of the TV
 1
 2
 4  3
 1  Changes the input mode  Selects Menu and Submenu entries
 (Press and hold down for MENU function)
 2  Selects channels in sequence
 3 Volume up/down
 4 POWER button
 • An image of the control panel is displayed on the 
screen while in use.
 Note
●   The TV consumes a small amount of electric energy 
even when turned of

f.
●   Do not place any objects between the TV remote 
control sensor and remote control.
 Panasonic does not guarantee operation and 
performance of peripheral devices made by other 
manufacturers; and we disclaim any liability or 
damage arising from operation and/or performance 
from usage of such other maker’s peripheral devices.
 Audio connection
 
 
  Optical cable
 
 DIGITAL AUDIO IN
 
 e.g. Amplifier with speaker system
 
 HDMI cable
 
 HDMI OUT (ARC)
 HDMI connection is available if connected audio 
equipment has ARC (Audio Return Channel) function. 
						

							15English
 
17 Returns to Home Screen
 
18 Displays Home Screen
 
19 Selects source to watch
 
20 Selects/OK/Change
 
21 Go back to previous menu
 22 Sound mute On/Off
 
23 Channel up/down, when viewing from ANT/Cable  source
 
24 Numeric keypad to select any channel or press to enter alphanumeric input in menus
 
25 Accesses NETFLIX service directly
 • This service requires an Internet connection.
 • This service might be stopped or the conditions 
changed without notice.
  26 Media player
 
27 Displays eHELP (built-in manual) (p. 18)
 Installing the remote’s batteries
 
 Pull open
 Hook
 
 
 Note the correct  polarity (+ or -)  Close
 Caution
●   Incorrect installation may cause battery leakage and 
corrosion, resulting in damage to the remote control.
 • Do not mix old and new batteries.
 • Do not mix different battery types (such as alkaline 
and manganese batteries).
 • Do not use rechargeable (Ni-Cd) batteries.
●   Do not burn or break batteries.
 Remote Control
 
 
1
2
3
4
5
6
7
8
9
10 11
12 13
14
15
16
17
18
19
23 22 21 20
26
27 25 24
 1  Set Sleep timer
 2  Switches TV On or Off (Standby)
 3  Switches surround sound setting
 4 Displays Menu
 5  Displays or removes the information banner
 6  Displays Apps (application) list
 7  Displays Option Menu for special functions (when 
available)
 8  Colored buttons (used for various functions)
 9 Volume up/down
  10 Use for digital channels
 
11 External equipment operations
 *      Functions are switched depending on connected 
external equipment and operation.
 
 :  Press and hold to skip backward/
forward.
  12 Switches to previously viewed channel or input
 
13 Closed caption On/Off
 
14 Selects Secondary Audio Programming
 
15 Operates the Favorite channel list function
 
16 Changes aspect ratio and zoom 
						

							16English
●  Complete first time setup
 Completion screen is displayed.
 3  Select type of Home Screen
 The “Tutorial” for “my Home Screen” starts.
 Follow the instruction of the “Tutorial” to select desired 
“Home Screen”.
 Example: Home Screen Selection
 
 Example: Lifestyle Screen
 
 • “Home Screen” is displayed as the start-up screen 
when the TV is turned on or the HOME button is 
pressed.
   First Time Setup
 The first time setup screen is displayed only when the 
TV is turned on for the first time, after the power cord is 
inserted into a wall outlet.
 1  Turn the TV on with the POWER 
button
 (TV)
 
 or
 (Remote)
 
 2  Setup the following items
●   Select your language
●   Select your country
●   Select your viewing mode 
(Be sure to select “Home Use”)
 If you select “Store Demonstration” by mistake, 
confirmation screen will be displayed.
 T

o display the “Set viewing mode” screen again 
in order to select “Home Use”, perform one of the 
following actions:
 • Press and hold down the rear POWER button for 
at least five seconds.
 • Unplug the power cord for 30 seconds and then 
plug it in again.
●   Configure Network connection
 Follow the instructions on screen to complete the 
Network connection.
●   ANT/Cable setup
 Set up based on how your 

TV programming is 
connected. Select “Yes” if you are connected to a 
Cable, Satellite or Fiber Optic box. Select “No” if you 
are connected to the Antenna/Cable In with a coaxial 
wire into the screw-on connector. In this case you will 
need to scan for channels that are available in your 
area.
●   Adjust the Clock
 Select the clock mode and adjust other settings.
 When “Auto” is selected, clock will be set 
automatically according to 

Time zone and DST. The 
TV must be connected to the Internet to use this 
feature.  
						

							17English
  
Operations
 Turn power on
  or
 (Remote)
 (TV)
 The last viewed Home Screen is displayed each time 
the TV is turned on.
 Example: Lifestyle Screen
 
 Example: Selected content screen
 
● 
 To return to “Home Screen” at any time.
 
●  You can customize “Home Screen” and display 
desired information, access specific features easily
, 
select the default “Home Screen”, etc. For details, 
follow the on-screen instructions or refer to the 
eHELP (Using my Home Screen > my Home Screen 
> Settings).
 Watching TV
 Select the TV viewer from “Home 
Screen”
 
  select
 
 access
 To watch TV via a Cable box, Satellite receiver, or 
any other source (DVD, DVR, gaming device, etc.), 
press the INPUT button and select the appropriate 
input. 
 To access each feature
 Access “Apps list” and select a feature
 
  Example: Apps  list
 
●   Apps are the applications (features) of the TV.
●   For operations of each feature and the setup of “Apps 
list”, follow the on-screen instructions or refer to the 
eHELP

 (Using my Home Screen > Using Apps list). 
						

							18English
  
Frequently Asked 
Questions (FAQ)
 How can I confirm that my TV is working properly?
 ●   The TV has a built-in Self Test. On the remote control, 
press MENU and scroll down and select HELP

 to 
access the TV SELF TEST. Run the test and follow 
the on screen instructions.
 
 Why doesn’t the remote control work?
  ●   Check that the batteries are fresh, are of the same 
type and are installed with the correct polarity (+ & -).
●   To operate other devices, such as changing channels 
when using Cable or Satellite boxes, or operating 
non-Panasonic Blu-ray players, use the remote 
supplied with the device.
 
 Why is there no picture or just a blue, black or 
snowy screen being displayed?
  ●   Ensure that the power cord is plugged in and the TV 
is turned on (front red LED light should be on, not 
blinking).
●   Press the INPUT button on the remote to select the 
correct input source.
●   Ensure all connections are correct and secure.
●   When using external video source, such as a Cable/
Satellite box or DVD player

, ensure that the device is 
on and functioning correctly.
●   Press MENU on the TV’s remote control. If the menu 
is displayed, then the 

TV is working; recheck above 
steps.
 
 The display panel moves slightly and clattered 
sound is heard when it is pushed with a finger.
  ●   There is a little gap around the panel to prevent 
damage to the panel. 

This is not a malfunction.
 
 Why is the screen blank and the power indicator 
blinking?
  ●   The TV has gone into shutdown mode to protect 
itself. 

Try unplugging it for a few minutes and 
connecting it again. If there was a temporary power 
surge on the AC line it may now be OK. If the blinking 
returns, visit www.panasonic.com/support (U.S.A.) or 
www.panasonic.ca/english/support (Canada).
   Using eHELP 
(Built-in Manual)
 eHELP is a built-in manual that explains how to easily 
operate the TV’s features. Press the eHELP button to 
access the guide.
 1 Display eHELP
 
 [First Page]
 
 When you enter eHELP again after exiting, the 
confirmation screen is displayed while the TV is turned 
on. You can select “First Page” or “Last Page”.
 2  Select the desired page from the  menu
 
 Categories  Menus
 
  select
 
 next
 
 
  select
 
 next
 
 Submenus  Desired page
 
  select
 
   next 
(If available)
 
 scroll up/down 
(If available the scroll 
bar appears.)
 
  To return to the previous menu/
layer
 
  To exit eHELP
 
 
 To display the menu related to 
the description (only for some 
descriptions)  
						

							19English
 Power cord plug
 Wipe the plug with a dry cloth at regular intervals.
 Note:  Moisture and dust can lead to fire or electrical shock.   Care and Cleaning
 First, unplug the power cord plug from 
the wall outlet.
 Display panel
 The front of the display panel has been specially treated. 
Wipe the panel surface gently using only a cleaning 
cloth or a soft, lint-free cloth.
●   If the surface is particularly dirty after cleaning up the 
dust, soak a soft, lint-free cloth in diluted, mild liquid 
dish soap (1 part mild liquid dish soap diluted by 
100 times the amount of water), and then wring the 
cloth to remove excess liquid. Use this cloth to wipe 
the surface of the display panel, then wipe it evenly 
with a dry cloth of the same type until the surface is 
dry

.
●   Do not scratch or hit the surface of the panel with 
fingernails or other hard objects. Furthermore, avoid 
contact with volatile substances such as insect 
sprays, solvents, and thinner; otherwise, the quality of 
the surface may be adversely af

fected.
 Cabinet
 If the cabinet becomes dirty, wipe it with a soft, dry cloth.●   If the cabinet is particularly dirty, soak the cloth in 
diluted, mild liquid dish soap and then wring the cloth 
dry

. Use this cloth to wipe the cabinet and then wipe it 
dry with a dry cloth.
●   Do not allow any mild liquid dish soap to come into 
direct contact with the surface of the 

TV. If water 
droplets get inside the unit, operating problems may 
result.
●   Avoid contact with volatile substances such as insect 
sprays, solvents, and thinner; otherwise, the quality of 
the cabinet surface may be adversely af

fected or the 
coating may peel off.
●   Do not let articles made from rubber or PVC be in 
contact with the 

TV for long periods of time.
 Pedestal
 Cleaning
●   Wipe the surfaces with a soft, dry cloth. If the unit is 
particularly dirty

, clean it using a cloth soaked with 
water to which a small amount of mild liquid dish 
soap has been added and then wipe with a dry cloth. 
Do not use products such as solvents, thinner, or 
household wax for cleaning, as they can damage the 
surface coating.
 Note:  If using a chemically-treated cloth, follow the  instructions supplied with the cloth.
●   Do not attach sticky tape or labels, as they can make 
the surface of the pedestal dirty

. Do not allow long-
term contact with rubber, vinyl products, or the like. 
(Doing so will cause deterioration.)