Panasonic 32"37"42"46.9" Class 1080p Lcd Hdtv Tc L32e5 Owners Manual

							Advanced
41
• 
Using Network services
IP address/DNS settings
  Select “IP/DNS setting mode” and set to “Automatic”
(When IP/DNS automatic acquisition in DHCP can be 
used)
IP address/DNS settingsIP setting modeIP address192.168.0.5Subnet mask255.255.255.0Default gateway192.168.0.254DNS setting modeAutomaticDNS192.168.0.20
AutomaticMenuPicture
Audio
Timer
Network
The acquired address is displayed.
 select
 OK
 Each IP address is acquired automaticallyIf you are using a broadband router, IP automatic 
acquisition in DHCP can be used under normal 
circumstances. If you are not sure, check with the person 
who installed the equipment, or check the instructions for 
each device.
 
■Manual setting
  Select “IP/DNS setting mode” and set to “Manual”
 Select the item and press OK
  Check the specifications of the broadband router and 
enter each IP address.
Or Enter each IP address as was specified by the 
provider
IP addressOK10I0  . 0  . 0  . 0
Proxy setting
Set only if specified by the provider. It is not required for normal household use.
 Select “Proxy setting”
MenuPicture
Audio
Timer
k
IP address/DNS settingsIP setting modeIP address192.168.0.5Subnet mask255.255.255.0Default gateway192.168.0.254DNS setting modeAutomaticDNS192.168.0.20Proxy setting Automatic
Network
 select
 OK
 Select item and press OK
 select
 OK
MenuPicture
AudioProxy settingProxy address
0
Proxy port
 Enter address or port number and press OK
 
■Proxy addressThis is the address of the relay server that is connected 
to the target server instead of the browser and sends 
data to the browser. Setting is only required if specified 
by the provider.
 
■Proxy portThis number is specified by the provider together with the 
Proxy address.
Network link
 
■Edit the name of this TVSets your favorite name for this TV. This name 
will be used to display the name of this TV on 
the screen of the other Network compatible 
equipment.
 Select “VIERA network name”
MenuPicture
Audio
Network
Network linkVIERA network nameDLNA remote controlEnable VIERA
DLNA remote volume controlNetwork remote controlEnable Enable
 select
 OK
  Edit the name and press OK
 
■Switches DLNA remote control (Disable/Enable)Switches DLNA remote control “Disable” or “Enable”
select
DLNA remote controlEnable 
 
■Volume setting in DMR operation  (Disable/Enable)Sets volume setting in DMR operation
•  Available only when “Enable” is selected in “DLNA remote 
control”
select
DLNA remote volume controlEnable
 
■Switches Network remote control (Disable/Enable)Switches remote control of network device like smartphone 
“Disable” or “Enable”.
select
Network remote controlEnable 
TC-L32_37_42_47E5_EN.indb   41 TC-L32_37_42_47E5_EN.indb   41 4/23/2012   11:28:00 AM
4/23/2012   11:28:00 AM 
						

							42
Online Movies settings
 Select “Online Movies settings”
 select
 OK
MenuPictureAudio
Timer Lock
Setup
Network
NetworkConnection testNetwork connectionWireless network settings
IP address/DNS settingsWireless (WiFi)
Software updateOnline Movies settings
Network status   Network link
New software noticeOn
 Select item and set to “Off”
    (Available services are displayed.)
    The items are not displayed on Online Movies screen.
Software update
 Select “Software update”
 select
 OK
MenuPicture Audio
Timer Lock
Setup
Network
NetworkConnection testNetwork connectionWireless network settings
IP address/DNS settingsWireless (WiFi)
Software updateOnline Movies settings
Network status   Network link
New software noticeOn
 Press OK to start the Software update screen
 Follow directions on the screen
 
●Set “Clock” first. (Press MENU -> Setup -> Clock)
New software notice
Displays new software update information when TV is turned on.
 Select “New software notice”
 Set the status (On/Off)
 select
 Change
MenuPicture
Audio
Timer Lock
Setup
Network
NetworkConnection testNetwork connectionWireless network settings
IP address/DNS settingsWireless (WiFi)
Software updateOnline Movies settings
Network status   Network link
New software noticeOn
Network status
 Select “Network status” and press OK
  Display current network status. 
●Displayed items differ depending on the type of network connection. 
(example)
Network statusNetwork connection Wi-Fi (Adapter) :
Network name (SSID) : :  ---
:
:
:
:
: XX-XX-XX-XX-XX-XX
:  ---.---.---.---
:  ---.---.---.---
:  ---.---.---.---
:  ---.---.---.---
:
: 0
Wireless type
Security type
Encryption type
Connection status
Signal strength
MAC Address
IP address
Subnet mask
Default gateway
DNS
Proxy address
Proxy port
TC-L32_37_42_47E5_EN.indb   42 TC-L32_37_42_47E5_EN.indb   42
4/23/2012   11:28:01 AM
4/23/2012   11:28:01 AM 
						

							Advanced
43
• 
Using Network services
 
Using  EASY IPTV
This function allows you to access VOD (Video-on-demand) services, easily with selecting the icon. 
●You need broadband environment to use this service.
RETURN
EXIT
OKMENUINTERNET
 
■Press to exit from 
a menu screen
 EXIT
 
■Press to go back to 
the previous screen
 RETURN
Preparations 
●Network connections (p. 39) 
●Network settings (p. 40-42)
Display the Online Movies screen
Select the item and press OK
OK
 select
 view
(example)
Depending on the usage conditions, it may take a while to read all the d\
ata.
•  The services are subject to change without notice.
•  Not all VOD services are available depending on the country and area.
 
●Displayed items can be changed by Online Movies settings. (p. 42)
 
■Using USB keyboard 
●Keyboard type (p. 53) 
●Operate USB keyboard/Entering characters (p. 23)
Other settings
In  
■Adjust the Picture and Audio
 Display “Menu”
200
0
0
0
0
Vivid
Picture 1/2
Brightness
Color
Tint
Sharpness Picture mode
Back light
Contrast Reset to defaults
OK
 select
 adjust
MENU
 Select the item
Menu
Picture
Audio
VIERA LinkOK
 select
 OK
example: Picture menu
Picture menu/Audio menu 
(p. 49-50)
 
■Use VIERA Link function
Recorder
TV
VIERA Link control
Speaker output
Back to TVOK
 select
 change Set
VIERA Link menu (p. 36)
TC-L32_37_42_47E5_EN.indb   43 TC-L32_37_42_47E5_EN.indb   43 4/23/2012   11:28:01 AM
4/23/2012   11:28:01 AM 
						

							44
Using  DLNA feature
You can share the contents (Photo, Video, Music, etc.) stored in DLNA Certified media server with your home network system.
VIERA TOOLS
R
OPTION
INFO
RETURN
EXIT
OK
 
■Press to exit from 
a menu screen
 EXIT
 
■Press to go back to 
the previous screen
 RETURN
Preparations 
●Network connections (p. 39) 
●Network settings (p. 40-42)
Display VIERA TOOLS
VIERA TOOLS
Select the “DLNA”
OK select
 next
(example)
Select serverDisplay available server.
DLNA server
 
RETURN
SERVER1
A5g SERVER2
SERVER3
3Info
OK
Select
SUB
MENU
Available DLNA servers Total listed number
(DLNA server list)
OK
 select
 next
 
●To display Information
 INFO
Select contentsDisplay contents of selected server.
Size:
Screen format 3648x2736
JPEG DLNA server
SERVER1 > Photos > All photos
 
wohsedilS
P0001022008-10-05 09:54P0001352008-11-20 13:18P0001802008-12-07 11:31P0002142008-12-10 15:20P0002512008-12-19 12:39P0002762008-12-25 14:06P0002932009-01-06 13:52M100252009-01-12 15:56M100422009-01-20 10:08M100542009-01-28 14:48M100782009-02-09 19:5828RETURNInfo
OK
Select
SUB
MENU
(File list)Contents type
Thumbnail
OK
 select
 next
 
●To display Information
 INFO
 
●To display “Slideshow 
settings” (p. 29) (photo 
only) 
 R
 
●To display Optional 
menu 
 OPTION
View/PlaySee “Using Media player” to operate. (p. 26-31)
TC-L32_37_42_47E5_EN.indb   44 TC-L32_37_42_47E5_EN.indb   44 4/23/2012   11:28:02 AM
4/23/2012   11:28:02 AM 
						

							Advanced
45
VIERA TOOLS
R
RETURN
EXIT
OK
Y
 
■Press to exit from 
a menu screen
 EXIT
 
■Press to go back to 
the previous screen
 RETURN
Preparations 
●Network connections (p. 39)  
●Network settings (p. 40-42) 
●Before connecting the Network camera to the TV, please complete “IP setting” and run 
“Connection test”
With all connected equipment turned on
Display “VIERA Link” menu
This function is not available depending on your country or area you sel\
ect. (p. 15)
VIERA TOOLSOK select
 next
(example)
 
●If there is no registered camera displayed, please set it in Network Cam\
era settings. 
(p. 45)
 
●There is also an option to start with sensor detection.
Select “Network camera”
Network camera
TV
VIERA Link control
Speaker output
Back to TVOK
 select
 OK
View
4 split screen 
●Default camera setting (p. 45)
Select OK
RETURN4 cam / 8 cam
Camera name Camera 1
Model  BL-C210A
Multi screen(1/4) select
 OK to Single screen
OK
R
9 split screen
Select OK
RETURN1-94 cam / 8 cam
Camera name Camera 1
Model  BL-C210A
Multi screen(1/9) select
 OK to Single screen
OK
YRETURN
Single screen Navigation area
Preset position
Home position1-90Pan
Tilt RETURN
Single screen
Camera name 
Camera 1
Model  BL-C210A
Preset position
Home position1-90
Pan
Tilt RETURN
Note
 
●A number of VIERA-compatible network cameras can be found at the followin\
g sites:http://www.panasonic.com/
http://panasonic.net/pcc/products/netwkcam/
 
●For more details on setting and operation of the Network camera, please \
also read 
the operating manuals for the Network camera.
 Network Camera
You can operate the Network camera from the TV remote and also check the images from the Network 
camera on 
your TV.  
●VIERA Link control only with the TV’s remote control (p. 37)
• 
Using Network services
TC-L32_37_42_47E5_EN.indb   45 TC-L32_37_42_47E5_EN.indb   45 4/23/2012   11:28:04 AM
4/23/2012   11:28:04 AM 
						

							46
Editing and  Setting Channels
 Auto program (Set automatically)
Automatically searches and adds available channels to the memory.
 Select “ANT in” Select a  scanning mode (p. 16)
  Select “Cable” or “Antenna”
Or select “Not used”.Auto programAll channels
Analog only
Digital onlyMenuPicture
Audio
Timer
Network
OK next
 select Select “Auto program”
CableANT/Cable setupANT in
Auto program
Manual program
Signal meterMenuPicture Audio
Network
OK next
 select 
●After the scanning is completed, select “Apply”.
(see p. 47 ). 
●All previously saved channels are erased.
R
RETURN
EXIT
OKMENU
G
JKLGHIMNO
TUVPQRSWXYZ
ABCDEF
,
@
 
■Press to exit from 
a menu screen
 EXIT
Display the menu
MENU
Select “Setup”
MenuSetup
1/2
ANT/Cable setupInput labels
Closed caption
VIERA Link settings
ECO/energy saving Channel surf mode
Language
ClockAllPicture
Audio
Timer Lock
Setup
Network
OK
 select
 next
Select “ANT/Cable setup”
MenuSetup 1/2
ANT/Cable setupInput labels
Closed caption
VIERA Link settings
ECO/energy saving Channel surf mode
Language
ClockAllPicture
Audio
Timer Lock
Setup
Network
OK
 select
 next
The current channel settings can be changed according to your needs and \
reception conditions.  
ANT/Cable setup and operation
TC-L32_37_42_47E5_EN.indb   46 TC-L32_37_42_47E5_EN.indb   46 4/23/2012   11:28:06 AM
4/23/2012   11:28:06 AM 
						

							Advanced
47
• 
Editing and Setting Channels
Manual program (Set manually)
Use this procedure when changing the channel setup or 
changing the channel display.
Also, use this to add or skip channels from the channel 
list manually. 
You can select a channel tuning mode (Digital only/
Analog only) in “Channel surf mode” (p. 52) Edit
 
●Caption
---
80-101
Edit CH caption
Caption ChannelOK
RETURN
Delete
ABC  → abc
@ 
D A
Select
OK change
 set or
JKLGHIMNOTUV,PQRSWXYZ
ABCDEF@
 Select “Edit”Manual programEdit
Cancel
Apply
Caption Favorite Add
2 ...
...
Ye s
3 ...
...
Ye s
4 ...
...
Ye s
5 ...
...
Ye s
6Y
ChannelOK select
 nextCaption
Select or edit the station identifier. 
(maximum 7 characters available)RETURN
 
●Favorite Select the item to editSet favorite 1/326-112OK
 select
 set
RETURN
Select
RETURNOK
Manual programEdit
Cancel
Apply
Caption Favorite Add
2 ...
...
Ye s
3 ...
...
Ye s
4 ...
...
Ye s
5 ...
...
Ye s
6 ...
...
Ye s
7 ...
...
Ye s
8 ...
...
Ye s
9 ...
...
Ye s
Channel
Prev.page Next page
GR
Caption
Favorite
Add
Proceed to 
next page
Go back to the previous 
page
OK
 select the item  to edit (Caption/
Favorite/Add)
 nextSet favorite Select the number
 
●Caption:
Changes the station 
identifier
 
●Favorite:
Registers channels to the 
Favorite List
 
●Add:
Adds or skips channels
 
●Add
Press OK to select “Yes (add)” or “No 
(skip)”RETURN
 Move the cursor to a channel numberManual programEdit Cancel
Apply
Caption Favorite Add
2 ...
...
Ye s
3 ...
...
Ye s
4Y es
ChannelOK
 select
 press OK to tune 
to the channel.
 Select “Apply”
l programCancel
Apply
Caption Favorite Add ...
...
Ye selOK select
 OK
To cancel the EditManual programEdit Cancel
Apply
Caption Favorite Add
2 ...
...
Ye s
3 ...
...
Ye s
4 ...
...
Ye s
5 ...
...
Ye s
ChannelOK select
 next 
Changes will be lost. Continue?Ye s
NoOK
 OK
(returns to “ANT/
Cable setup”)
 select  “Yes”
 Signal meter (Check signal strength)
Check the signal strength if interference is found or freezing occurs on\
 a digital image.
--Signal  meterChannel
Signal  strength
Current 86%
Peak level 98%
Tune manually
MenuPicture
Audio
Timer Lock
Setup
Network
Signal intensity 
JKLGHIMNOTUV,PQRSWXYZ
ABCDEF@
 or OK change  channel
 OK
 
●If the signal is weak, check the antenna.
If no problem is found, consult your local 
dealer.
Note
 
●Not available if “Cable” is selected in “ANT in”
(see p. 46).
 
●Available only for digital antenna channels.
TC-L32_37_42_47E5_EN.indb   47 TC-L32_37_42_47E5_EN.indb   47 4/23/2012   11:28:07 AM
4/23/2012   11:28:07 AM 
						

							48
 How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and othe\
r functions so that you can enjoy 
watching TV best suited for you.
RETURN
EXIT
MENU
 
■Press to exit from 
a menu screen
 EXIT
 
■Press to go back to 
the previous screen
 RETURN
Display the menu
MENU 
●Shows the functions that can be adjusted. 
●Some functions will be disabled depending on the 
type of input signal.
Menu structure
00
0
Audio
Balance
Advanced audio
Preferred language and audio for hearing or
visually impaired, if offered during digital
broadcast. (Available only in the U.S.)
DTV language and SAP settings
Bass
Treble Reset to defaults
Menu
Picture
Audio
Timer Lock
Setup
Network
RETURNSelect OK
Menu bar
Press OK to move to the Menu items.
Menu items
Press OK to proceed to next screen if available.
Help information
Operation guide
(example: Audio)
Select the menu
Menu
Picture Audio
Timer Lock
Setup
Network
Picture settings
Audio settings
Network settings
Timer (Sleep, On/Off timer)
Lock (Channel, Game, Program, etc.)
Setup (other settings)
Adjust or select a menu item
Vivid+80+95
+50
+50 0
+50
Picture 1/2
Brightness
Color
Tint
Sharpness Picture mode
Back light
Contrast Reset to defaults
Menu
Picture
Audio
Timer Lock
Setup
Network
OKadjust 
or 
select
(example: Picture menu)
TC-L32_37_42_47E5_EN.indb   48 TC-L32_37_42_47E5_EN.indb   48 4/23/2012   11:28:09 AM
4/23/2012   11:28:09 AM 
						

							Advanced
49
• 
How to Use Menu Functions
 
●“Reset to defaults” will be grayed out if no changes are made in t\
he following menus:
“Picture”, “PC adjustments”, “Audio” and “Closed ca\
ption”.
   Picture settings
Adjust the image or picture quality
Settings Items Item Description
 Reset to defaults
Resets all picture adjustments to factory default settings except for “\
Advanced picture”.
 Picture mode VividProvides enhanced picture contrast and sharpness for viewing in a well-l\
it room.
StandardRecommended for normal viewing conditions with subdued room lighting.
CinemaFor watching movies in a darkened room. It provides a soft, film-like pi\
cture.
Custom (Photo)Customizes each item according to your taste.
Photo is displayed in JPEG menu.
GameFor playing video games.
 Back light Adjusts the luminance of the back light.
 Contrast, Brightness,
Color, Tint, 
SharpnessAdjusts the color, brightness, etc. for each picture mode to suit your taste
• Display range Contrast/Brightness/Color/Sharpness  : 0 - 100
    Tint  : -50 - +50
 Color temp.Cool/Normal/WarmSelects a choice of Cool (blue), Normal, or Warm (red) color. 
Color mgmt. Off/OnOn: Enhances green and blue color reproduction, especially outdoor scene\
s.
 A.I. picture  Off/On Controls dark areas without affecting the black level or brightness in the overall picture.
 C.A.T.S. Off/OnAutomatically adjusts the screen brightness according to the ambient lig\
hting condition. 
 Video NR Off/OnReduces noise, commonly called snow. Leave it off when receiving a strong signal.
•  Some menus are grayed out depending on the input signal or condition.
(e.g. “Zoom adjustments” will be grayed out if the aspect is not \
set to Zoom.)
 Aspect
adjustments Screen format FULL/H-FILL/
JUST/4:3/ZOOM
Changes the format (aspect ratio). 
Lets you choose the aspect depending on the format of 
received signal. (p. 55)
HD sizeSize 1/Size 2Selects between 95 % (Size 1) or 100 % (Size 2) for the scanning 
area with High-definition signal.
Select “Size 1” if noise is generated on the edges of the screen.
 
●Size 1: Selected item for “HD size”. Scanning 95 % 
●Size 2: Selected item for “HD size”. Scanning 100 %
H size Size 1/Size 2Adjusts the horizontal display range to reduce noise of both side 
edges of an image.
Size 2: Adjusts the image size according to the aspect mode to 
reduce noise. (p. 55)
Zoom adjustmentsAdjusts vertical alignment and size when aspect setting is “ZOOM”.\
 PC adjustments Reset to defaultsResets PC adjustments.
SyncH & VThe H and V sync signals are input from the HD/VD connector. (p. 58)
On greenUses a synchronized signal on the Video G signal, which is 
input from the G connector. (p. 58)
Dot clock Alleviates the problem if a picture appears to be vertically-striped, fl\
ickers partially or is blurred.
H-positionAdjusts the horizontal position.
OK
V-positionAdjusts the vertical position.
OK
Clock phaseAlleviates the problem if the whole picture appears to flicker or is blu\
rred.
First adjust the Dot Clock to get the best possible picture, then adjust\
 the clock Phase 
so that a clear picture appears.
 
●It may not be possible to display a clear picture due to poor input sign\
als.
Input
resolutionSwitches to wide display. 
●VGA (640×480 pixels), WVGA (852×480 pixels), XGA (1,024×768 pixels),
WXGA (1,280×768 pixels)
 
●Options change depending on signals
H-frequency
V-frequencyDisplays the H (Horizontal)/V (Vertical) frequencies.
Display range
Horizontal: 15 - 110 kHz
Vertical:  48 - 120 Hz
TC-L32_37_42_47E5_EN.indb   49 TC-L32_37_42_47E5_EN.indb   49 4/23/2012   11:28:10 AM
4/23/2012   11:28:10 AM 
						

							50
Settings ItemsItem Description
HDMI settings HDMI/DVI RGB  range (HDMI 1-4)Auto/
Standard 
(16-235)/
Nonstandard
Prevents the blown out highlights and blocked up shadows when 
a wide-range signal is received. Selects between standard RGB 
range (16-235 bits) or non-compliance (0-255 bits).
Auto: Switches the RGB range (Standard (16-235)/Nonstandard) 
depending on the HDMI signal information.
Contents type
(HDMI 1-4)Off/Auto/Photo/
GraphicsSets content type to each HDMI input.
Auto: Switches content type automatically depending on the 
HDMI signal information.
Photo: Best setting for JPEG viewing.
Graphics: Best setting for On-Screen display of connected 
equipment.
•  Some menus are grayed out depending on the input signal or condition.
(e.g. “3:2 pulldown” will be grayed out if the input signal is hi\
gh definition or you are viewing photos, etc.)
 Advanced 
picture   3D Y/C filter  Off/On
Minimizes noise and cross-color in the picture. 
 Color matrix SD/HDSelects image resolution of component-connected devices.
SD: Standard Definition  HD: High Definition
Only used with 480p video signal.
 Block NR Off/OnReduces noise of specific digital signals of DVD, Cable box, etc. 
Mosquito NR Off/OnReduces HDTV flicker noise in the contoured sections of an 
image.
 Black level Dark/LightSelects Dark or Light. Valid only for external input signals. 
 3:2 pulldown Off/On/AutoAdjusts the picture recorded in 24 fps for optimum quality. 
  
Audio settings
Adjust Audio  quality
Settings Items Item Description
 Reset to defaults Resets Bass, Treble, and Balance adjustments to factory default settings.
Bass Increases or decreases the bass response.
Treble Increases or decreases the treble response.
Balance Emphasizes the left / right speaker volume.
 Advanced audio A.I. sound Off/On
Equalizes overall volume levels across all channels and 
external inputs.
Surround Off/OnEnhances audio L/R response when listening to stereo.
Bass boost Off/OnEnhances bass to provide powerful sound.
Volume levelerMinimizes volume disparity after switching to external inputs.
TV speakers Off/OnSwitches to “Off” when using external speakers.
Off: “A.I sound”, “Surround” and “Volume leveler” do not work if 
“Off” is selected.
HDMI 1-4 in Digital/ Component/
VideoThe default setting is “Digital” for the HDMI connection. (Digita\
l 
input signal) 
Select audio input terminal when DVI cable is connected. 
(Analog audio input signal)
DTV language 
and SAP 
settingsPreferred 
language
English/
Spanish/
FrenchSets language priority.
•  The setting in Preferred language takes precedence over 
Preferred audio type.
Preferred audio 
type Main Audio/
Hearing
Impaired/
Visually
ImpairedNarration settings for impaired users
Hearing Impaired: Activates closed captioning when available 
on broadcasts.
Visual Impaired: Activates the narration soundtrack when 
available on broadcasts.
•  For Digital TV only
TC-L32_37_42_47E5_EN.indb   50 TC-L32_37_42_47E5_EN.indb   50
4/23/2012   11:28:10 AM
4/23/2012   11:28:10 AM