Panasonic 3 Ccd Color Camera Ccu Gp Us932cu Operating Instructions

FRONT SW
(Button operation
via front face)
11
ON
HD
PROGRE.
NOT USE
FRONT SW OFF
SD 
INTER.
NOT USE
RS–232C
DC 12V IN RS–232C S–VIDEO RGB/Y P b P r
1
2
3
4OUTVIDEO  SYNC
IN
ON1234
!4
!5
!7
@0
@1 !3!6
!9!8
ON
HD
PROGRE.
NOT USE
FRONT SWON1234
OFF
SD 
INTER.
NOT USE
RS–232COUTVIDEO  SYNC SDI
IN
DC 12V IN RS–232C S–VIDEO RGB/YPbPr
1
2
3
412
!5 !4
@2!7
!8 !9 @0
@1!6
 GP-US932CUS, GP-US932CUSE  GP-US932CU, GP-US932CUE

!3HDMI output connector [HDMI] (* only for GP-
US932CU, GP-US932CUE)
This connector is...

@2SDI output connector [SDI] 
(* only for GP-US932CUS, GP-US932CUSE)
This connector provides HD-SDI or SD-SDI output sig-
nals.
Important:
• Please use a high quality cable compatible with
HD-SDI. !812 V DC power connector [DC 12V IN]
This connector is used to connect an external DC
power supply of 12 volts (2 A or more).
Important:
• A class 2 power supply of 12 V DC (10.8 to 13.2
volts) shall be used.
Compatible connector
HR10A-7P-4S (73) manufac-
tured by HIROSE ELECTRIC
CO., LTD. (as of October...

The following shows how to mount the camera on the tripod (locally procured).
The tripod socket can be mounted on either top or bottom of the camera head.
 
13
Tripod socket
Camera mounting base
(locally procured)
Attach the camera cable 
to the camera mounting base.
Installation/Connection
Caution:
ONLY CONNECT THIS TO 12 V DC CLASS 2 POWER SUPPLY.
Be sure to connect the grounding lead to the GND terminal.
Important:
• The tripod and CCU shall be horizontally placed.
• When the camera head is mounted on...

xTurn a C-mount lens clockwise to engage the lens with
the lens mount section.
How to mount lens
Important:
• Be sure to turn off the power of the CCU before mounting a lens.
• A lens whose projection length of the lens mount section is 4 mm or less shall
be used.
• The recommended lens aperture ranges from F2.2 to F16. Selection of less
than F2.2 of the lens aperture may result in image blurring.
• When a zoom lens is used, focus adjustment method varies with the lens. For
further information, refer to...

Setup items Description Page
qCAMERA ID Specifies the camera title. Through this item, a camera title is created
with alphanumeric and symbol characters, and displayed on the
screen.
wELC Specifies the ELC function.
eSHUTTER Specifies the electronic shutter speed.
rGAIN Adjusts the gain.
tSENS UP Specifies electronic sensitivity enhancement.
yOUTPUT SEL Specifies the output signal.
uSCENE FILE Registers the settings of details, gamma, hue, etc.
DTL MODE Specifies the details.
RED DTL Adjusts the...

vTo return to the camera image screen after storing the
settings, move the cursor to END and press the [SEL]
button.
The settings can be stored even if the power of the
CCU is turned off.Basic operations
The description below explains how to operate the SETUP
menu basically.
First of all, the explanation provides how to display the
SETUP menu on the connected monitor used for adjust-
ment.
Important:
• The following functions are not available when the cam-
era head is not connected. 
• Startup of white...

1. Camera title setting [CAMERA ID]
This item specifies the camera title. The camera title that
indicates the camera location and other information about
the camera is created with alphanumeric, symbol, and
katakana characters and displayed on the screen. The
camera title is named with up to 16 characters.
Follow the procedure below to specify the camera title.
zSet CAMERA ID to ON and press the [SEL] button.
→The title creation screen appears.
Note:
• Even if CAMERA ID is set to OFF, pressing the [SEL]...

MANU:The detection area can be manually specified.
(page 18)
AUTO:The dark areas are automatically covered and
only the bright areas are automatically detected.
cMove the cursor to PEAK/AVE and use the [e] and
[f] buttons to adjust the detection level.
When the cursor is moved to P, the peak value (maxi-
mum) is detected. When the cursor is moved to A, the
average value is detected.
Manual setup of detection area
The detection area is manually specified.
zSelect MANU for AREA on the ELC CONT screen
and...

19
3. Electronic shutter setting [SHUTTER]
The electronic shutter speed is specified. The speed is
selectable from the following.
OFF (default),1/100 (1/120*), 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000, and MANU
Select MANU, and press [SEL] button. The SHUTTER
screen appears to adjust the shutter speed in detail.
Adjustable speed range: 3/562 (2/562*) – 552/562
* The value is for GP-US932CUE/GP-US932CUSE.
Note:
• When the shutter speed is specified, be sure to set both
ELC and SENS UP to OFF. (pages...

zMove the cursor to DTL MODE on the SCENE FILE
screen and press the [SEL] button.
→The DTL MODE screen appears.
xMove the cursor to “PATTERN”, select a pattern from
among “1”, “2” and “3”, and press the [SEL] button.
→The settings of “DTL BAND” and “DTL LEVEL” are
applied to “USER”.
The band and level can be manually adjusted in
“USER”. Perform adjustment on an as-needed basis.
Be sure to view the monitor when the adjustment is per-
formed.
Note:
• The band and level can also be adjusted directly with-...