Home > Panasonic > Processor > Panasonic 2k Processor Ajhdp2000 Operating Instructions

Panasonic 2k Processor Ajhdp2000 Operating Instructions

Here you can view all the pages of manual Panasonic 2k Processor Ajhdp2000 Operating Instructions . The Panasonic manuals for Processor are available online for free. You can easily download all the documents as PDF.

Page 11

11
2K Processor & HD-D5 VTR System Connections
Digital (AES/EBU) Audio input
HD Reference input
Dual-Link SDI Input
Dual-Link SDI output
Dual-Link SDI output
Single HD SDI Monitor output
Digital (AES/EBU) Audio output
Analog Audio output
Cue Audio output
Timecode output
Waveform output Analog Audio input
HD SYNC OUT
Cue Audio input
Timecode inputDIGITAL AUDIO IN ch1 - 8
AUDIO IN ch1 - 4
CUE IN
TC IN
DIGITAL AUDIO OUT ch1 - 8
AUDIO OUT ch1 - 4
CUE OUT
TC OUT
WFM OUT
RS-422 Control input
RS-422 Control...

Page 12

12
Connection with existing systems
This is an example where the connections for the existing system and the 2K system are switched within the router.
To switch to the 2K system mode, select “2048 (PsF)” or “1920 (PsF)” in F3 (VIDEO) in SYSTEM SET UP menu on 
the HD-D5 VTR.
For details, refer to pages 9 and 10 of the “Operating Instructions Supplement” for the AJ-HD3700H, AJ-HD3700A, 
and AJ-HD3700B.
Server/Color Corrector/Telecine
HD House Reference Signal
HD/SD Player/Recorder
HD analog Signal Router...

Page 13

13
Indicator Display (Front Panel LED)
The operating state of this unit can be checked on the three LEDs (Alarm Lamp, Horizontal Sample 
Display Lamps) on the front panel: Lighting or Blinking.
Display Description
Normal operating state
(Lighting: When there is no warning or when the warnings are masked from 
MENU)
Format error
(In the following cases, 1920 LED or 2048 LED blinks normally or rapidly.)

RECORDED FORMAT UNMATCH (NO J2K TAPE):
TAPE is not 2K processor recording format.

RECORDED FORMAT...

Page 14

14
Connection Check
After the regular system is connected, it is possible to 
check which devices are connected to each other by 
executing CONNECTION CHECK in the Front Panel 
MENU of the HD-D5 VTR when you own more than 
one unit of the 2K Processor and HD-D5 VTR.All three LEDs of “ALARM”, “2048” and “1920” 
repeatedly blink during the operation described on the 
left. (For the regular system connection)
Service Switch (Rear)

Service Switch (only Use Service Maintenance)
This slide switch is only for...

Page 15

15
Restrictions
Reference vs. Input Signal Phase
The 2K processor does not have input buffer memory; 
therefore, be sure to lock and match the phase between 
the reference signal and input signals. If the signal 
phases are not locked and matched, the phase of 
signals, output signals might be corrupted.
System vs. Input Signal Frequency
The 2K processor does not have input buffer memory; 
therefore, be sure to match the frequencies between the 
system settings and input signals. If the frequencies are...

Page 16

16
Restrictions (Continued)
Differences in the actual image conditions due to differences in the number of H Samples between SYSTEM settings 
and Tape playback (Tape recording ID) (According to the SYSTEM settings)
Internal signal source (INT-SG)
zThere are four internal signal sources: CB1, CB2, 
BLACK, and WHITE. (10-bit precision)
zXYZ and RGB color spaces are expressed 
differently, resulting in a difference in the internal 
signal format.

CB1:100% Color Bar
CB2:75% Color Bar
CB1:Color Bar Signal...

Page 17

17
Rack Mounting
The unit can be installed in a 19-inch standard rack using the rack-mount adaptors supplied with the unit. 
We recommend using the slide rails and brackets specified below for the installation.
CC3001-99-0191 slide rails and B-308 brackets are made by CHASSIS TRAK.
For further details, consult your dealer.
1Remove the four feet from the unit’s bottom panel.
zTake care to avoid exposing the unit to vibration
or impact.
2Mount the slide rail inner members onto the unit.
zThe length of the...

Page 18

18
Specifications
[GENERAL]
 indicates safety information.
Operating Temperature:
5°C to 40°C (41°F to 104°F) 
Operating Humidity:
10% to 80% (no condensation)
Weight:
Approx. 7.5 kg (16.5 lb)
Dimensions (W a H a D):
(not including supporting feet, jacks, connectors 
and fan.)
424 mm a 87 mm a 470 mm (2U size)
(16-3/4 inches a 3-7/16 inches a 18-1/2 inches)
Recording Video Signal:
2048 a 1080/23.98p, 24p XYZ/RGB 4:4:4
1920 a 1080/23.98p, 24p XYZ/RGB 4:4:4
Video Recording Format:
HD-D5 JPEG2000
Audio...

Page 19

19
Specifications (Continued)
[TC]
_TC Input Signal
Dual Link SDI Input: (Embedded LTC/VITC)
BNC a 2, 75 Ω (LinkA only)
SMPTE 291M standard
_TC Output Signal
Dual Link SDI Output: (Embedded LTC/VITC)
BNC a 2 a 2, 75 Ω (LinkA only)
SMPTE 291M standard
[Other Input and Output]
HD Reference Input:
BNC a 2 (loop-through a1), 
75 Ω automatic termination
HD(1920 a 1080/23.98PsF, 24PsF) tri-level sync
HD SYNC Output:
BNC a 1, 75 Ω
HD(1920 a 1080/23.98PsF, 24PsF) tri-level sync,
Advanced Reference signal for...

Page 20

Panasonic Broadcast & Television Systems Company
Unit Company of Panasonic Corporation of North America
Executive Office:
One Panasonic Way 4E-7, Secaucus, NJ 07094   (201) 348-7000
EASTERN ZONE: 
One Panasonic Way 4E-7, Secaucus, NJ 07094   (201) 348-7196
Southeast Region: (201) 348-7162
WESTERN ZONE: 
3330 Cahuenga Blvd W., Los Angeles, CA 90068   (323) 436-3500
Government Marketing Department:
One Panasonic Way 2E-10, Secaucus, NJ 07094   (201) 348-7587
Broadcast PARTS INFORMATION & ORDERING:
9:00...
Start reading Panasonic 2k Processor Ajhdp2000 Operating Instructions

Related Manuals for Panasonic 2k Processor Ajhdp2000 Operating Instructions

All Panasonic manuals