Palm M125 Handheld Instructions Manual

Chapter 3 Page 53
3. Tap the Password box.
4. Enter a password. 
5. Enter a hint to help your remember your password if you forget it. 
This is optional.
6. Tap OK. 
7. Enter the same
 password a second time, and tap OK.
Changing or deleting a password
Once you define a password for your handheld, you can change or 
delete it at any time. You must enter the current password before you 
can change or delete it.
To change or delete your password:
1. Tap the Password box.
2. Enter the current password. 
3....

Page 54  Managing Your Applications
4. Do one of the following:
To change the password and hint, enter the new password and 
hint, and tap OK.
To remove the password, tap Unassign.
Locking your handheld
You can lock your handheld so that it cannot be operated until your 
password is entered. In the event that your handheld is lost or stolen, 
this helps protect your data from unauthorized use. You can set your 
handheld to lock automatically, or you can lock it manually.
Locking your handheld...

Chapter 3 Page 55
3. Tap the Auto Lock Handheld box, and then enter your password.
4. Tap On power off.
5. Tap OK.
To set your handheld to lock at a preset time:
1. Tap the Applications icon  . 
2. Tap the Security icon.
3. Tap the Auto Lock Handheld box, and then enter your password.
4. Tap At a preset time, and then use the arrows to set the time.
5. Tap OK. 

Page 56  Managing Your Applications
To set your handheld to lock after a period of inactivity:
1. Tap the Applications icon  . 
2. Tap the Security icon.
3. Tap the Auto Lock Handheld box, and then enter your password.
4. Tap After a preset delay.
5. Enter the inactive period, then select Minute(s) or Hour(s) from the 
pick list. 
6. Tap OK.
Important:
If you lock your handheld, you must enter the exact 
password to re-activate your handheld. If you forget the 
password, your handheld will present the...

Chapter 3 Page 57
Locking your handheld manually
You can turn off and lock your handheld manually.
To lock and turn off your handheld:
1. Tap the Applications icon  . 
2. Tap the Security icon.
3. Tap Lock & Turn Off.
4. Tap Off & Lock.
5. To start your handheld, turn it on and then enter the password. 
Recovering from a forgotten password
If you forget your password, your handheld will display the password 
hint, if you entered one, to help you remember the password. If you 
are still unable to remember...

Page 58  Managing Your Applications 

Chapter 4 Page 59
Chapter 4
Using Expansion Features
Your handheld provides an expansion card slot that enables you to 
add additional software applications and memory. You can also use a 
special kind of expansion card that allows you to back up your data 
when it is inconvenient to perform a HotSync
® operation. 
Note:
Battery life may vary depending on the expansion cards used.
Your handheld is also equipped with a universal connector so that 
you can easily attach and use peripheral hardware devices,...

Page 60  Using Expansion Features
Removing an expansion card
1. Hold your handheld securely.
2. Use your thumb to push against the top of the card, as if you were 
pushing it further into the slot. The expansion card slot releases the 
card, and your handheld makes an audible system sound.
3. Once the slot has released the card, gently remove the card from 
the expansion card slot. 
Note:
Your handheld comes with a dummy card seated within 
the expansion card slot. To prevent debris from entering 
and...

Chapter 4 Page 61
Switching between your handheld and an 
expansion card
When you use an expansion card, your handheld creates and displays 
a new category that matches the name of the expansion card. You can 
easily switch between applications installed on your handheld and on 
the expansion card.
To switch to an expansion card:
1. Tap the pick list in the upper-right corner.
2. Tap the category item that matches the name of the expansion card.
Copying applications to an 
expansion card
You can copy...

Page 62  Using Expansion Features
3. Tap App, and then tap Copy.
4. Select the card name from the Copy To pick list.
5. Select Handheld from the From pick list.
6. Tap an application to copy.
7. Tap Copy.
8. Tap Done.
Note:
You can install applications to a card that is seated in the 
expansion card slot during a HotSync operation; see 
“Installing add-on applications” in Chapter 3 for details. 
Also, you can beam applications from expansion cards; see 
See “Beaming information” in Chapter 5 for details....