Orion Pdp Opm 4240 Users Manual

							18
OPM-4240 / OPM-4240R
19
Infinitely Expandable 
01234567890123456789
RS-232CVIDEO
INOUT
IN
OUT
S-VIDEO
IN OUT
COMPONENT 
INOUT
Y
Pb
Pr
DVI-DPC
IN IN
OUT OUT
ID SELECT
M-ON
M-STB S-ON FA N0123456789
VCr Connection
PC(MSCS) to control MPDP
VCR
RS-232C (Maximum 15m)
S-Video connection (Maximum 5m)
Video connection (Maximum 5m)
[PDP ID 1]
 
ID switch must be set as ID 1  y
for one set use.
012345678901234567890123456789
               
						

							20
OPM-4240 / OPM-4240R
21
Infinitely Expandable 
01234567890123456789
RS-232CVIDEO
INOUT
IN
OUT
S-VIDEO
IN OUT
COMPONENT 
INOUT
Y
Pb
Pr
DVI-DPC
IN IN
OUT OUT
ID SELECT
M-ON
M-STB S-ON FA N0123456789
DVD Player & DTV Set top box connection
In case input source is DVD(480p, 576p, 480i, 576i), select DVD in MSCS main screen. y
In case input source is DTV(720p, 1080i, 1080p), select DTV in MSCS main screen. y
PC(MSCS) to control MPDP
DVD Player & DTV Set top box
RS-232C (Maximum 15m)
Component connection (Maximum 5m)
•  According to manufacturers, the indication of DVD Component output port may vary; “Y, PB, PR”, “Y, B-Y, R-Y” or “Y, CB, CR.”
•  Component Input ports You can get better image quality by connecting DVD player to component input ports as below.
Component ports of the set  Y  Pb   Pr
Video output portsof DVD player
 Y  Pb  Pr Y  B-Y  R-Y  Y  Cb  Cr
•  Caution for Component connection In case component cables are not properly connected, you may have bluish or redish screen or even no screen images.Caution
[PDP ID 1]
 
ID switch must be set as ID 1  y
for one set use.
012345678901234567890123456789
               
						

							22
OPM-4240 / OPM-4240R
23
Infinitely Expandable 
4.2. Connection of Multi-screen MPDP
Recommended maximum set connection for Multi setting is shown in table below.   y
If you need to connect more than described in the table, you have to use distributors.
Image quality can be affected by cable or signal quality.   y
INPUTSOURCEResolutionConnectionRemark
DVI1600 x 1200 x 60HZ9 sets
PC8.2. PC & DVI Resolution Reference1 sets67 page
DT V720p, 1080i, 1080P4 sets
DVD480i, 480p, 576i, 576p6 sets
VIDEO/S-VIDEONTST, PAL, SECAM6 sets
RS-232C30 setsORION Cable Only
01234567890123456789
RS-232CVIDEO
INOUT
IN
OUTS-VIDEO
IN OUTCOMPONENT 
INOUT
Y
Pb
Pr
DVI-DPC
IN IN
OUT OUT
ID SELECTM-ON
M-STB S-ON FA N012345678901234567890123456789
RS-232CVIDEO
INOUT
IN
OUTS-VIDEO
IN OUTCOMPONENT 
INOUT
Y
Pb
Pr
DVI-DPC
IN IN
OUT OUT
ID SELECTM-ON
M-STB S-ON FA N012345678901234567890123456789
RS-232CVIDEO
INOUT
IN
OUTS-VIDEO
IN OUTCOMPONENT 
INOUT
Y
Pb
Pr
DVI-DPC
IN IN
OUT OUT
ID SELECTM-ON
M-STB S-ON FA N012345678901234567890123456789
RS-232CVIDEO
INOUT
IN
OUTS-VIDEO
IN OUTCOMPONENT 
INOUT
Y
Pb
Pr
DVI-DPC
IN IN
OUT OUT
ID SELECTM-ON
M-STB S-ON FA N012345678901234567890123456789
RS-232CVIDEO
INOUT
IN
OUTS-VIDEO
IN OUTCOMPONENT 
INOUT
Y
Pb
Pr
DVI-DPC
IN IN
OUT OUT
ID SELECTM-ON
M-STB S-ON FA N0123456789
RS-232C
S-VIDEO
DVI
PDP1PDP2PDP3PDP4PDP5
PC (MSCS) to control
MPDP
               
						

							24
OPM-4240 / OPM-4240R
25
Infinitely Expandable 
4.4. Connection of 3 x 3 MPDP4.3. Connection of rS-232C Cable
Maximum use of RS-232 with Daisy Chain connection is  y30 or less. 
If you need additional connection, use RS-232 distributor.
ID 1
ID 6
ID 11
ID 2
ID 7
ID 12
ID 3
ID 8
ID 13
ID 4
ID 9
ID 14
ID 5
ID 10
ID 15
ID 16
ID 21
ID 17
ID 22
ID 18
ID 23
ID 19
ID 24
ID 20
ID 25
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232C Distributor
RS-232C control PC
ID 1
ID 4
ID 7
ID 2
ID 5
ID 8
ID 3
ID 6
ID 9
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUT
RS-232CIN
OUTDVI-D
OUT IN
DVI-D
OUTIN
DVI-D
OUTIN
DVI-D
OUTIN
DVI-D
OUTIN
DVI-D
OUTIN
DVI-D
OUTIN
DVI-D
OUTIN
DVI-D
OUTIN
RS-232C control PCDVI
DVI Signal Distributor
(UXGA : UP TO 250MHz)
               
						

							26
OPM-4240 / OPM-4240R
27
Infinitely Expandable 
 4.5. iD setting of X x Y MPDP
Identity number (ID) indicates the location of each MPDP. y
When you look at the MPDP screens in front of MPDP. y
Recommended ID of X x Y screens
ID 1ID 2ID 3ID 4ID 5
ID 6 ID 7ID 8ID 9ID 10
ID 11 ID 12 ID 13ID 14ID 15
ID 16 ID 17ID 18ID 19ID 20
ID 21 ID 22ID 23ID 24ID 25012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789
012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789
012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789
012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789
012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789
PDP ID
1
PDP ID
2
PDP ID
3
PDP ID
4
PDP ID
5
PDP ID
6
PDP ID
7
PDP ID
8
PDP ID
9
PDP ID
10
PDP ID
11
PDP ID
12
PDP ID
13
PDP ID
14
PDP ID
15
PDP ID
16
PDP ID
17
PDP ID
18
PDP ID
19
PDP ID
20
PDP ID
21
PDP ID
22
PDP ID
23
PDP ID
24
PDP ID
25
MSCS Installation start screen.
5. Setting and operation of MSCS software
5.1. installation
Insert the Installation CD. y
You can see following installation start screen. y
Select proper version for your product and star installation  y
MSCS supports Windows y® 2000, Windows® XP and Windows Vista™ only
Caution for using MSCS 
1.DataforPicturecontrol,ManualTrackingandsoforthcanbereadbyclickingthe
rightbuttonofyourmouseonthedesiredMPDPsetfromMSCS.
Pleasedonotuseabovefunctiontogetherwiththeotherfunctions.
2.WhenyouoffACpower,executepoweroffbyMSCSfirstanddisconnectAC
powertosaveyourconfiguration.
Caution
[PDP ID 01]
012345678901234567890123456789
100 digit    10 digit    single digit
               
						

							28
OPM-4240 / OPM-4240R
29
Infinitely Expandable 
Main Image of MSCS (Multi Screen Control system)
5.2. Start MSCS
MSCS is an application program needed to control MPDP. y
When you execute MSCS (v 4.2) for your product at the installation screen, it will create a new folder  y
at C:\Program File\MSCS (v4.2) and an icon on your computer screen. 
By double clicking the MSCS (v 4.2) icon, the initial screen image of MSCS (v 4.2) will be  y
displayed as shown in the picture. 
※InputsourceisnotdisplayedontheMSCSscreen,butitisindicatedbycolors.
※DVI:Yellow,PC:Green,DTV:Pink,DVD:Purple,S-VIDEO:Brown,VIDEO:Gray
5.3. Setting 'Com Port'
Com Port connects or disconnects the communication between PC and MPDP. y
Connect MPDP to PC Com Port via RS-232C cable. y
 
 
Go to MSCS Menu → Communication and set Com Port. Click 'Connect' using mouse or press 'Ctrl+C'  y
using keyboard.
 
In order to disconnect communication, click 'Disconnect' using mouse or press 'Ctrl+D' using keyboard. y
When you use USB-to-RS232C converters, you need to set Com Port again, because MSCS uses one  y
of Com Port no. 1 to 30.
5.4. "new design/Last design" setting
When Com Port is successfully connected, pop-up window for "New design/Last design" appears.
Click "Open New Design" to prepare new configuration. y
 
Click "Open Last Design" to go to last design before closing. y
New/Last Design Set
Communication SettingCommunication Setting
               
						

							30
OPM-4240 / OPM-4240R
31
Infinitely Expandable 
5.5. Multi-screen configuration
InputthenumbersofXandY
X is for the number of row and Y is for column. -
X and Y can be selected within the range from 1 to 15. The maximum MDPD quantity of MSCS  -
control is 100 sets.
MPDP image of selected numbers of X and Y is displayed in the Screen configuration in one  -
second after setting the number.
SelectoneofinputsourcesfromDVI,PC,DTV,DVD,S-VIDEO,or
VIDEO.
 
Executionoftheconfiguration.
When you click "PLAY"button after selecting input source from Source select and the numbers of  -
X and Yin MPDP Configuration, the configuration of MPDP is generated as shown in the figure 
below. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1
2
3
Screen Configuration Setting
5.6. MSCS instruction 
Check  "ALL PDP" to send data to all connected MPDP regardless of ID. y
In order to control power of specific MPDP, use "Power On/Off" button after selecting the specific MPDP. y
5.7. iD Setting
ID of MSCS(Multi Screen Control System) is set automatically. y
To send a command to the desired MPDP set, select ID of the MPDP from Screen Configuration. y
Select ID using right button of mouse. Selected ID is displayed with red square box. y
Example of MPDP ID Setting
(Input signal is DVI, Configuration is 3 by 3)
MPDP Control - Power On/Off
Pleasewaitforatleast10secondsbeforeexecuting"PowerOn"commandafter
thefirstACpowerconnection.Ifnot,itmaycauseabnormalbehavior.
PleasedisconnectACpowerandreconnectincaseofabnormalbehavior.Caution
ID 1 ID 2 ID 3
ID 4  ID 5 ID 6
ID 7  ID 8 ID 9
inFO ※ : 
Check the resolution of the input source. It is displayed at the upper right corner of the screen. -
Check the signal. If there is no input signal, "No signal" is displayed. -
               
						

							32
OPM-4240 / OPM-4240R
33
Infinitely Expandable 
SelectadesirableinputSourcein"SourceSelect"
Ex) Select "DVI" in "Source Select"  -
Clickdesirablescreenwithleftbuttonofmousethenthescreenwould
beconvertedintoDVI.
Click the left mouse button on the screen that you want to change. Screen will be turned into  -
DVI input screen.
Youcanconfigureotherscreensinthesameway.
Selected screen would be converted into DVD. -
1
2
3
5.8. Configuration of various modes
You can configure various input sources as you want. y
DVI
PC
PC
PC
PC
PC
PC
PC
PC
DVI
PC
PC
PC
DVD
PC
PC
PC
DVD
Selectadesirableinputsourcein"SourceSelect"
Select "DVI" in "Source Select". -
Selectscreenswithleftbuttonofmouseanddragfromthefirstscreen.
SelectedscreenswouldbeconvertedintoDVI.
1
2
3
5.9. Setting multi screens at a time
You can select multi screens at a time as you want. y
PC
PC
PC
PC
PC
PC
PC
PC
PC
DVI
DVI
PC
DVI
DVI
PC
PC
PC
PC
               
						

							34
OPM-4240 / OPM-4240R
35
Infinitely Expandable 
5.10. Slide Control
MPDP configuration that users set is displaying repeatedly. y
To use Slide Control, go to MSCS Menu → Control → Slide Control or press "Ctrl+S" using Keyboard. y
Makeadesirableconfigurationin"ScreenConfigurations"
Set"OperationTime"in"SlideControl"
Click "Add" button to save configuration. -
The range of "Operation Time" is from 10 seconds to 1 hour. -
1
2
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
Savevariousscreenconfigurationsinthesameway.
Click"SlideStart"todisplaysavedscreenconfigurations.
-Saved screen configurations are displaying for preset time.
Check"Repeat"todisplaysavedconfigurationrepeatedly.
4
3
5
PC
PC
PC
DVI
DVI
DVI
DVI
DVI
DVI
DVI
DVI
PC
DVI
DVI
PC
PC
PC
PC
               
						

							36
OPM-4240 / OPM-4240R
37
Infinitely Expandable 
Click"Stop"buttontoend"SlideControl"
SaveorLoadtheslideconfiguration
Click "SAVE" button to save user added Slide configuration as "*.ssd" file. -
Click "LOAD" button to open saved "*.ssd" file. -
7
6
※To view the saved screen configuration, select the list from "List Box." 
※Saved screen protocol is transmitted to MPDP by double clicking the list. 
5.11. Screen Control
Register values related to display of MPDP can be changed. y
Click "Picture Control" of "Control" menu bar or enter "Ctrl+P" in order to run "Picture Control" window. y
 
In order to control display values, input values directly in "Edit Box" and press Enter key.   y
Or click -/+ button using mouse.
 
Click "Exit" button or press "Ctrl+X" using keyboard to close "Picture Control" window. y
Color Temp. y
Normal : Initial setting. Proper for normal video image view. -
Studio : Low Color temperature. Proper for broadcasting purpose. -
Picture Control
When you load "Slide File", previous slide configuration 
and new slide configuration must be identical.
If they are different, the file cannot be loaded. So, revise 
the new slide file configuration as previous configuration 
or save as new file.
Caution