Orion Pdp Opm 4240 Users Manual

							Thank you for purchasing our MPDP.
Please read through this user's manual for safety before installing this\
 product.
This product is manufactured for Multi Plasma display model only.
• 2009.05.21
A revolutionary MPDP
Infinitely Expandable MPDP
User’s Manual
OPM-4240 / OPM-4240R
A revolutionary MPDP
Infinitely Expandable MPDP
Address: 257-6, Gongdan-dong, Gumi-si, Gyeongsangbuk-do, Korea
Tel : +82-2-6678-8533,      Fax: +82-2-6678-8599
ORION PDP CO.,LTD.
www.oriondisplay.net
                                                            
						

							1
Infinitely Expandable 
User's ManualMulti-Screen ControlSystem(MSCS)Guide Pin(4pcs)Handle (2 pcs)
RS232 CableBolt (4 pcs)DVI-D CablePower Cable
Supplied Accessories
Features of MPDP
▶  
Enjoy a wide flat screen with high brightness and high quality.
▶Easy to install and move due to its thin design
▶ Enjoy your favorite programs with various split-screen features simultan\
eously presenting 
several programs.
Thank you for purchasing our MPDP monitor.
This manual describes how to use the product and notes in use.
Please read the manual carefully  before using it.
After reading this manual, please retain for future reference. 
If you have any questions or a problem occurs, please contact either the\
 company you purchased this 
product from or an authorized service center. 
※Displaying static picture for an extended period of time may cause an bu\
rn-in effect.
To prevent electric shock, Do not remove cover.
No user serviceable part inside
Refer servicing to qualified service personal.
Notice to usersClass A digital device
It is a device designed for business purpose with a safety certificate f\
or electromagnetic interference, which 
user should be mindful of.
Optional Accessories
MAIN FRAME(refer to page 10~11)RS-232C Distributor Necessary for connecting more than 30 units.
1 Input, 6 Output
MF-Controller SET
PWRDVDCVBSY/CB.CA T.P.
STB
PC
DVI
DTV
PDP
REMOTE CONTRO L
MPDP
EnterS1S2S3S4S5S6S7SCR
Warning
If you fail to comply with the regulations for safety and proper use, 
fire or injury may be caused. Warning
" Important Safety Instructions" 
 
  1) Read these instructions.
  2) Keep these instructions.
  3) Heed all warnings.
  4) Follow all instructions.
  5) Do not use this apparatus near water.
  6) Clean only with dry cloth.
  7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8)  
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus 
(including amplifiers) that produce heat.
  9)  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has 
two blades with one wider than the other. A grounding type plug has two blades and a third 
grounding prong. The wide blade or the third prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10)  Protect the power cord from being walked on or pinched particularly at plugs, convenience 
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12)  Use only with the cart, stand, tripod, bracket, or table specified by \
the manufacturer, or 
sold with the apparatus. When a cart is used, use caution when moving th\
e cart/apparatus 
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for lo\
ng periods of time.
14)  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has 
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been 
spilled or objects have fallen into the apparatus, the apparatus has bee\
n exposed to rain or 
moisture, does not operate normally, or has been dropped. 
The symbol in figure 21 shall be shown adjacent to the text of item 12 above.
               
						

							2
OPM-4240 / OPM-4240R
3
Infinitely Expandable 
Contents
※Pleasekeepfollowinginstructionfor
panelprotectionwithoutexception. ..............................................................4
1.SafetyPrecautions  ........................................................................................... .......8
2.HowtoInstall ............................................................................................. ...............10
3.GuidanceforUsers ........................................................................................... ...14
4.HowtoConnectCables ....................................................................................16
4.1. Connection of one set MPDP .................................................................................16
PC & DVI Connection  .............................................................................................16
VCR Connection ......................................................................................................18
DVD Player & DTV Set top box connection .........................................................20
4.2. Connection of Multi-screen MPDP  ........................................................................22
4.3. Connection of RS-232C Cable ..............................................................................24
4.4. Connection of 3 x 3 MPDP .....................................................................................25
4.5. ID setting of X x Y MPDP  ........................................................................................26
5.SettingandoperationofMSCSsoftware ................................................27
5.1. Installation  ............................................................................................ .....................27
5.2. Start MSCS ............................................................................................ ...................28
5.3. Setting 'Com Port' ............................................................................................ ........29
5.4. "New design/Last design" setting ..........................................................................29
5.5. Multi-screen configuration ......................................................................................30
5.6. MSCS Instruction   ............................................................................................ ........31
5.7. ID Setting ........................................................................................... .......................31
5.8. Configuration of various modes .............................................................................32
5.9. Setting multi screens at a time ...............................................................................33
5.10. Slide Control ............................................................................................ ...............34
5.11. Screen Control ............................................................................................ ...........37
5.12. PC Tracking  ........................................................................................... ...............38
5.13. Timer Control ............................................................................................. .............39
5.14. BIC Control ........................................................................................... ..................40
BIC status Indicator .................................................................................................42
Burn-In-Compensation Control Method ...............................................................43
BIC Intervals and effect ...........................................................................................43
How to Control BIC    ...............................................................................................44
5.15. Orion PDP Home Page logon and Version information .....................................49
6.MSCSProtocol ............................................................................................ ...........50
※Attachment : ASCII to HEX Conversion Table ..................................................64
※Hex code value according to Set ID  ................................................................64
7.Othertips  ............................................................................................. .......................65
7.1. Before calling for service ........................................................................................65
7.2. About Plasma display panel ...................................................................................66
8.Applicablesignals  ........................................................................................... .....67
8.1. DVD / DTV ............................................................................................ ...................67
8.2. PC & DVI...................................................................................................................67
9.Specifications ............................................................................................ ...............68
               
						

							4
OPM-4240 / OPM-4240R
Warning
5
Infinitely Expandable 
Warning
WarningWarning
※Handle with Caution.
     - Shock/Impact on the set's sides will result in 
internal circuit damages.
     - The edge/bottom of the panel are fragile.  
Use shock-absorbing pads or rugs for laying 
down the product.
Please do not stand PDP •	
alone. It may fall or slip 
off and Panel can be 
broken or damaged.
If you need to stand PDP, •	
you must use handles on 
the back and lean over 
the PDP to avoid panel 
touches ground or floor.
Please do not lean over •	
the PDP. It may damage 
the bottom part of the 
PDP.
If you need to lay down •	
PDP as face down 
position, please use 
shock-absorbing pads 
under the PDP. 
Please do not lean over the •	
PDP toward the edge part. 
It may damage the edge 
part of the PDP.
If you need to lay down •	
PDP as face up position, 
please be cautious for 
falling objects on the 
surface of the PDP. 
PANELPANELPANELPANEL
CUSHION
PANEL
※ Please keep following 
instruction for panel protection 
without exception.
  -   This product can be damaged even with minor 
impact for its nature. 
Please keep following instruction to carry or 
store the products.
               
						

							6
OPM-4240 / OPM-4240R
Warning
7
Infinitely Expandable 
Warning
Open Structure
UnlikeconsumerPDPproduct,thepanelofMPDPisexposedwithout
anyprotectivechassis.
Itneedsextracautiontocarryorinstalltopreventanyimpact. 
How to carry MPDP
ItalwaysneedstwopersonstocarryorinstallMPDP.
Whenyou carry MPDP with up straight manner, please hold handles on the back
and bottom part of the panel together.
Please be careful not to touch the bottom part of the panel when you put down the
panel.
When you carry MPDP with flatbed manner, please hold handles on the back and
lowerpartoftheback.
Please be careful not to touch the bottom part of the panel when you put down the
panel.
Please do not touch the panel with your hand. 
Pleaseseepage8forunpackandhandleassembly.
PANEL
MASTER FRAME
It has to be handled with 
care, because the panel 
glass substrate is exposed 
without side cover.
Although Panel is protected 
with a Side cover, it is still 
sensitive to the impact or 
shock from outside. 
OPM-4240•	OPM-4240R•	
                                 
						

							8
OPM-4240 / OPM-4240R
9
Infinitely Expandable 
1. Safety Precautions
Do not poke the front screen with sharp •	
material. It may damage the screen and 
may cause malfunction of the product.
Do not lean against the product or keep •	
it leaned.  It may cause injury or failure.
 
Do not put it at any place with much •	
humidity, dust, oil, smoke or steam.  It 
may cause failure.
If you do not want to use the product •	
for a long time, keep the power plug 
unplugged to save electricity.
The socket-outlet should be installed •	
near the equipment and be easily 
accessible.
Do not put any heavy object on it. •	
It may cause failure.
Do not pull out or hang down the •	
connection cable.  It may damage the 
cord to cause fire or electric shock.
 
Pull out the power plug by holding the •	
plug.  Otherwise, it may damage the 
power cord to cause fire or electric 
shock.
Do not ride or step on the product It may •	
cause breakage when fallen down.
When moving it, disconnect the •	
connecting cable.  Otherwise, it may 
damage the cable to cause fire or 
electric shock.
Install the product on safe and flat •	
surface.
Do not put candles on the product. If the •	
liquid flows inside the product.  It may 
cause electric shock or fire.
Do not touch product’s front surface with •	
hand.  Otherwise, the image quality can 
be lowered. 
 
If it operates abnormally, stop using it •	
immediately.
 
Please refer to a specialized •	
construction company for installing stand 
or wall mount unit.  Otherwise, damage 
or injury may be caused.
Avoid any action to damage the power •	
cord or power plug.  It may cause fire or 
electric shock.
Do not alter (or disassemble) the •	
product.  It may cause electric shock 
since high voltage is flowing inside.
 
Do not place any liquid-containing •	
container on it.  If the inside is wet, it 
may cause electric shock or fire.
Do not touch the device when lightning •	
strikes.
Do not pull out the power plug with a wet •	
hand.  It may cause electric shock.
Do not install the product where it may •	
be exposed to direct sunlight or near 
any heating device. It may shorten the 
product's life span or cause failure.
 
Do not put any foreign material into •	
the product.  It may cause a failure or 
shorten the life span.
  
Do not install in an unstable location •	
It may cause injury.
Do not exceed ratings of AC outlet •	
or extension cords. It may cause failure.
 
Make sure the product is not covered •	
with any object.  If the ventilation hole is 
blocked, the inside temperature may rise 
to cause overheating resulting in fire.
               
						

							10
OPM-4240 / OPM-4240R
11
Infinitely Expandable 
2. How to install
How to assemble handles
Install this set only at a location where adequate ventilation is available. y
1.ProductispackedinaboxasshowninFigure1.
2.PleasecarefullyremovethePackingBagwithaknifeorapairofscissors. 
   ※  Please check front and rear side before you cut the bag to prevent any damages 
on panel or set.  
3.Pleaseassemblehandleswiththeboltsthatareintheaccessoryboxtothe 
rearsideasshowninthefigure.
How to move MPDP
1.2peopleholdeachhandleonproduct'sbackside.
2.Itneedstwopeopletocarryorinstallthisproduct.
   Please hold the handles in the back and the front bottom part at the same time.
   - Please do not grab the panel, but grab bottom of master frame when you carry or install the products.
   - Please use gloves when you carry or install the products.
※Attention:
-Donotremovethepanelprotectionpaduntilasetiscompletelyinstalledonastandorawallhanger. 
PleasecarefullyremovePanelprotectionpadtopreventanydamagesontheproduct.
-Please make sure to use panel protection when you move, carry or rent MPDP.
Handles
Packing Bag
[Figure 1]
[Figure 3]
[Figure 2]
[Figure 4]
Panel protection
Panel protection
Panel
Master frame
MPDP
Handles
Panel protection
                               
						

							12
OPM-4240 / OPM-4240R
13
Infinitely Expandable 
install on a Main FraME Stand
Please secure minimum clearance as shown in the picture for adequate ventilation and technical service. 
Main FraME Stand Unit (Option)
The set can be installed as shown below.   y
(For further information, refer to the optional 'MAIN FRAME Installation and Setup Guide'.)
Main FraME Wall Mounting Unit (Option)
The set can be installed on the wall as shown below.   y
(For further information, refer to the optional 'MAIN FRAME Installation and Setup Guide'.)
Mount on the Main FraME wall
Please secure minimum clearance as shown in the picture for adequate ventilation and technical service. 
Please do not install our product at following locations to protect the product and  y
prevent possible malfunction.
   - Places of vibration or shock: PDP set may fall and damaged
   -  Next or near to Sprinkler sensors: The sensors may detect heat from a set and sprinkler can be activated.
   - Around high voltage power lines: Noise from the power line may affect screen images
   - Around heating apparatus: PDP set may be overheated and damaged. 
Please check the  ystability of wall.  
If the wall is not strong enough, reinforce the wall before installation.
Please connect all the cables to proper ports in a set before installation. y
Hanger
Hanger Bolt
PDP
MAIN FRAME
Guide Pin
Guide Pin
Hanger
Hanger Bolt
PDP
MAIN FRAME
WALL BRACKET
                    
						

							14
OPM-4240 / OPM-4240R
15
Infinitely Expandable 
3. guidance for Users
input/Output Terminals
❶
❷
❸
❹
❺ 
❻
❼
❽
1. RS-232C
MPDP Control, Firmware Upgrade, 9pin D-sub
2. Video
Composite Signal
NTSC, PAL, SECAM
3. S-Video
S-Video Signal
NTSC, PAL, SECAM, 4pin Mini Din
4. Component
DVD Signal
DTV - YPbPr Signal
5. PC
Computer RGB Analog Signal, D-sub 15pin
6. DVI-D
TMDS Signal
7. ID Switch
Set ID Switch
8. RS-232C(BIC)
BIC Firmware Upgrade
9. AC Input
AC 100V ~240V, 50/60Hz
Set iD Switch Setting
Example of ID Switch setting y
-  You can set ID with 3 rotary switches as shown in the following figure.
LED indication y
❾
[PDP ID 01]
012345678901234567890123456789
[PDP ID 15]
0123456789
100 digit    10 digit    single digit
100 digit    10 digit    single digit
※   When you set iD of MPDP set, power cable must be disconnected. if power cable is not disconnected 
during  iD setting, MPDP set may be operated with the previous  iD and it may cause abnormal behavior. 
※   For stable operation, wait for at least 10 seconds prior to use MPDP control program after the first a C 
power connection.
LED IndicationDescription
012345678901234567890123456789M-ON
M-STBFA N
S-ONNo Power. 
012345678901234567890123456789M-ON
M-STB FA N
S-ONInternal System Check after Power on.
012345678901234567890123456789M-ON
M-STB FA N
S-ONSystem ready. 
012345678901234567890123456789M-ON
M-STB FA N
S-ONPower ON by MSCS Program.
(M-ON and S-ON LEDs blink every other 
second. Power on status)
012345678901234567890123456789M-ON
M-STB FA N
S-ONPower Off by MSCS Program.
(System ready).
M-ON(Master-ON) : IP Board Master Power On.
FAN : FAN POWER ON, IF Red LED on IP board is turned on, please check FANs.
※	To protect the product, power can be disconnected automatically when the \
fan is stopped.
M-STB(Master- Stand By) : IP Board Master Ready
S-ON(Slave-ON) : IP Board Slave Ready 
LED  ON      OFF     ON/OFF       
               
						

							16
OPM-4240 / OPM-4240R
17
Infinitely Expandable 
4. How to Connect Cables
4.1. Connection of one set MPDP
PC & DVi Connection
MPDP and PC should be connected; a Com Port in a PC and RS-232C IN port in a  y
MPDP is connected with supplied RS-232C cable.
 
MPDP On/Off or Screen adjustment can be controlled by MSCS (Multi-Screen Control  y
System). 
 
ID setting on the backside of MPDP must be identical with the ID setting in MSCS to  y
control MPDP with a PC.
If you do not have Com Port, you need to use an USB converter for RS-232. Depending  y
on manufacturers or models, converters may cause malfunction.
PC
01234567890123456789
RS-232CVIDEO
INOUT
IN
OUT
S-VIDEO
IN OUT
COMPONENT 
INOUT
Y
Pb
Pr
DVI-DPC
IN IN
OUT OUT
ID SELECT
M-ON
M-STB S-ON FA N0123456789
[PDP ID 1]
 
ID switch must be set as ID 1  y
for one set use.
012345678901234567890123456789
PC (MSCS) to control MPDP
RS-232C (Maximum 15m)
PC- analog connection (Maximum 5m)
DVI connection (Maximum 5m)
※ 
If you need longer connection, please use 
DVI boosters or DVI fiber-optic cable.