Optoma Zw212st Projector User Manual

61English
Memory Drive Display
 Displays the projector mod el name, software version, and 
the memory device information.
Information   

62English
USB Display
 When the projector detects that a computer is connected 
through the mini USB port, the projector enters USB 
display mode and displays the following screen:
USB Display
USB Displ ay
USB Displ
ayHow to use USB Display





Ensure USB cable is well connected to DISPL AY mini USB port





Computer will automatic execute the program dlusb_launcher.exe in the virtual CD-ROM





If the above does not happen, please execute the dlusb_launcher.exe manually
     from the virtual CD-ROM....

63English
USB Display
Minimum System Requirements
System Requirements
 ►CPU: Intel Dual Core 1.4GHz or better 
 ►Memory: 1GB of RAM
 ►Disk: 10MB of free disk space
 ►Graphic Card: nVIDIA or ATI graphic card with 64MB 
VRAM or above
1.  While the DSCP engine is active, the hardware acceleration level of 
the PC’s display card will be turned to “None” temporarily for best 
performance.
2.  If the Auto Play has been disabled on the current PC/Laptop, users 
need to find the CD-ROM and execute the DLUSB...

64English
Network Display
For Windows Systems
Features
1. Support Driverless Screen Capture
2. Support Screen Monitoring feature
3. Support Windows XP, Vista, 7 (32 bits, 64 bits)
4. Support Audio Projection feature
5. Support remote desktop feature
System Requirements
 ►CPU: Intel Dual Core 1.4GHz or better   
(PowerPC not supported)
 ►Memory: 1GB of RAM
 ►Disk: 10MB of free disk space
 ►Graphic Adaptor: nVIDIA or ATI graphic card with 64MB 
VRAM or above
 ►Operating System: Windows XP SP2/SP3 (32 and...

65English
Network Display
For MAC-OS Systems
Features
1. Support Screen Mirroring
2. Support MAC OS 10.5, 10.6, 10.7
3. Support Audio  Projection   
(Optional, if connected receiver supported)
4. Support remote desktop feature   
(Optional, if connected receiver supported)
System Requirements
 ►CPU: Intel Dual Core 1.4GHz or better   
(PowerPC not supported)
 ►Memory: 1GB of RAM
 ►Disk: 10MB of free disk space
 ►Graphic Card: nVIDIA or ATI graphic card with 64MB 
VRAM or above
 ►Operating System: MAC OS...

66English
Network Display
Network Display mode
	The IP address 
generated by the 
projector varies 
depending on your 
local area network  
connection 
settings.
In Network Display mode, the projector supports remote 
projection from computers, tablets, and mobile phones when 
connected to an Ethernet or wireless network. Alternatively, 
you can control the computer remotely through the projector.
You can connect to the Optoma Web Utility page for 
conference projection using a web browser or download...

67English
Network Display
Open Optoma Web Utility
1. Connect your computer to the same network where the 
projector is connected.
2. Launch your web browser application (e.g. Internet 
Explorer, Safari, Firefox, etc).
3. On the address bar, type the IP address noted from the 
Network Display screen.
4. The Optoma Web Utility screen opens.
 ►To use Optoma Presentation Software, click the 
operating system of your computer to download the 
software (see "Downloading the Software" on page 
68).
 ►To...

68English
Network Display
Optoma Presentation Software
The Optoma Presentation Software (OPS) supports remote 
projection from up to four computers simultaneously. The 
computer must be connected in the same local area network 
as the projector and have OPS installed. You can also control 
the connected computer remotely using the projector.
For first time use, download OPS from the Optoma web utility.
Downloading the Software
1. Activate Network Display and open Optoma Web Utility 
(see “Network Display...

69English
Network Display
4. The following message may appear, click Run to continue.
5. Click Next to continue.
6. Follow the on-screen instructions to complete the setup.
Once the installation is complete, the Optoma Presentation 
Software (OPS) automatically launches and searches for 
the projector. After the projector is detected, the login screen 
appears.   

70English
Network Display
Login
1. On your computer, click Start > Programs > Optoma > 
OPS. Or, double-click the OPS icon on your desktop to 
launch the application.
2. Enter the Login Code  provided for in the Network Display 
screen (see step 3 of “Activating Network Display Mode” on 
page 66). 
3. Click OK.
	The Server IP 
and User Name 
are automatically 
detected by the 
software.