Optoma Zw212st Projector User Manual

11English
Introduction
Control Panel
342
8
610
7
1
5
9
Using the Control Panel
1Light LEDIndicate the projector light status.
2Temp LEDIndicate the projector temperature status. 
3Four Directional 
Select KeysUse     to select items or make adjustments to your selection.
4
EnterConfirm your item selection.
5IR ReceiverReceive the remote control signal.
6Re-SyncAutomatically synchronize the projector to the input source.
7Power / 
Standy LED
Press to turn the projector on or off (see “Power On/Off the...

12English
Introduction
Remote Control
PowerSwitch
Source
L
Re-Sync
R
Keystone VolumeMode
-+-+
Brightness1Menu2Zoom3HDMI4Freeze5AV mute6S-Video7VGA8Video9ContrastUSB03D
Page-Page+
Enter
1
1413
11
10
12
19
2
8
522
21
324
26
25
234
9
6
7
16
15
17
18
20
Using the Remote Control
1Power
  Refer to the “Power On/Off the Projector” section 
on pages 14-15.
2SourcePress Source to select an input signal.
3L ButtonMouse left click.
4EnterConfirm your item selection.  

13English
Introduction
5Mode or Laser 
(Button varies on 
model)
With Laser version: Press to use the laser pointer.
Without Laser version: Press Mode to change 
modes.
6
Keystone +/-Adjust image distortion caused by tilting the 
projector.
7Brightness Adjust the brightness of the image.
8FreezePause the screen image.  
Press this button again to unlock.
9 HDMIChoose HDMI as the source.
10 S-Video Choose S-Video as the source.
11ContrastAdjust image contrast.
12 Number KeysPress the keys to enter...

14English
Connecting the Projector
Connect to Computer/Notebook
	Due to the 
difference in 
applications 
for each 
country, some 
regions may 
have different 
accessories.
	 (*) Optional 
accessory 
PICTURE BY
SD Card
RS232C VIDEO S-VIDEO
VGA-IN/YPbPr
VGA-OUT
RJ-45
HDMI
USB /DISPLAY AUDIO-OUTAUDIO-IN
MOUSE/SERVICE
mole x
MOLEXMOLEX
E62405SPR
1
245
6
7
3
8
1. Power Cord
2. RS-232 Cable*
3. VGA Cable
4. HDMI Cable*
5. USB Type B Cable*
6. Audio Input Cable*
7. Audio Output Cable*
8. VGA Output Cable*  

15English
Connecting the Projector
Connect to Memory Drive
SD Card
RS232C VIDEO S-VIDEO
VGA-IN/YPbPr
VGA-OUT
RJ-45
HDMI
USB /DISPLAY AUDIO-OUTAUDIO-IN
MOUSE/SERVICE
E62405SPR
1
2
3
1. Power Cord
2. SD Card*
3. USB flash drive*
	 (*) Optional 
accessory    

16English
Connecting the Projector
Connect to Network
	(*) Optional 
accessory 
PICTURE BY
SD Card
RS232C VIDEO S-VIDEO
VGA-IN/YPbPr
VGA-OUT
RJ-45
HDMI
USB /DISPLAY AUDIO-OUTAUDIO-IN
MOUSE/SERVICE
E62405SPR
1
23
1. Power Cord
2. Network Cable*
3. Wi-Fi Dongle* (for wireless network functionality)  

17English
Connecting the Projector
Connect to Video Sources
Composite Video 
Output
S-Video Output
	
Due to the 
difference in 
applications 
for each 
country, some 
regions may 
have different 
accessories.
	 (*) Optional 
accessory 
Audio Output
PICTURE BY
SD Card
RS232C VIDEO S-VIDEO
VGA-IN/YPbPr
VGA-OUT
RJ-45HDMIUSB /DISPLAY AUDIO-OUTAUDIO-IN
MOUSE/SERVICE
E62405SPR
DVD Player, Set-top Box, HDTV receiver
1
3
2
6
5
4
7
8
1. Power Cord
2. S-Video Cable*
3. VGA Cable
4. HDMI Cable
5. Composite V ideo...

18English
Using the Projector
Powering the projector On / Off
	If the projector does 
not automatically 
search for source, 
press 
 on the control panel or the 
Menu button on the 
remote control. Go 
to “OPTIONS” and 
set “Source Lock” 
to “Off”. See page 
42.
Powering On the Projector
1. Connect the power cord to the projector and to the power 
source. When connected, the POWER/STANDBY LED 
lights Amber. 
2.  Press  on the control panel or on the remote control. The 
POWER/STANDBY LED lights Blue....

19English
Using the Projector
	Contact the 
nearest service 
center if the 
projector displays 
these symptoms. 
See pages 
68-69 for more 
information.
Warning Indicator
Warning indicators light up and the projector automatically shuts 
down in the following conditions:
 
Y
Y “Light” LED indicator is lit amber and the “POWER/
STANDBY” indicator flashes red.
Y
Y “TEMP” LED indicator is lit yellow green and the “ POWER/
STANDBY” indicator flashes red. This indicates the projector 
has overheated. Under...

20English
Using the Projector
Adjusting the Projected Image
Adjusting the Projector’s Height 
Tilt-Adjustment FeetTilt-Adjustment Ring
The projector is equipped with elevator feet for adjusting the 
image height.
1. Locate the adjustable foot you wish to modify on the 
underside of the projector. 
2. Rotate the adjustable ring clockwise to raise the projector 
or counter clockwise to lower it. Repeat with the remaining 
feet as needed.