Optoma W304m Projector User Manual

							21
Using the Remote Control
BrightnessAdjust the brightness of the image.
Menu Press Menu to launch the on-screen display 
(OSD) menu. To exit OSD, Press 
Menu 
again.
Zoom Press +/- to zoom in of an image.
HDMI Press HDMI to choose HDMI source.
Freeze Press Freeze to pause the screen image.
AV Mute Momentarily turns off/on the audio and 
video.
VGA Press VGA to choose source from VGA- IN 
connector.
Video Press Video to choose Composite video 
source.
Contrast Adjust the contrast of the image.
3D Press 3D to turn on/off 3D menu.
User Controls 
English  
						

							22
On-screen Display Menus
The Projector has multilingual On-screen Display menus that allow 
you to make image adjustments and change a variety of settings. The 
projector will automatically detect the source.
How to operate
1. To open the OSD menu, press Menu on the Remote Control or 
Projector Keypad.
2.  When OSD is displayed, use ◄► keys to select any item in 
the main menu. While making a selection on a particular page, 
press ▼ or  Enter to enter sub menu.
3.  Use ▲▼ keys to select the desired item and adjust the settings 
by ◄► key.
4.  Select the next item to be adjusted in the sub menu and adjust 
as described above.
5.  Press Enter to confirm, and the screen will return to the main 
menu.
6.  To exit, press Menu again. The OSD menu will close and the 
projector will automatically save the new settings.
Main Menu
Sub MenuSetting
User Controls 
English   
						

							23
Menu Tree
Auto Power Off (min)Direct Power On
Sleep Timer (min)Quick Resume
No / Yes
Power Mode (Standby) Active / EcoExit
Lamp HoursLamp ReminderBrightness ModeLamp ResetExit
Presentation / Bright / Movie / sRGB / Blac kboard / User / 3D
Color
H Image Shift / V Image Shift / Exit
Film / Video / Graphic / Standard
Auto / RGB / YUV
Cold / Medium / WarmRed / Greem / Blue / Cyan / Magenta / Yellow / White / Reset / Exit
DLPLink/IRAuto / SBS / Top and Bottom / Frame SequentialOff / On
Display Mode / Format / 3D Sync Invert / Mute / Test Pattern
Internal SpeakerMuteVolume
LogoLogo CaptureClosed CaptioningExit
Off / On
Off / On
Default / Neutral / User
Off / On
Off / CC1 / CC2
Off / On
Off / On
Off / On
Off / On
Bright / Eco
Off / OnOff / OnOff / On
Off / On
No / Yes
Blue / Black / Red / Green / White
Month / Day / Hour 
HDMI / VGA / Video / Exit
16:9/16:10
BrightnessDisplay ModeIMAGE
ContrastSharpnes s
AdvancedTint
Languange
Remote SettingsSecurity
Projection
Menu location
Screen Type (WXGA only)
Audio Settings
SETUP I AUDIO SETTINGS
Advanced
SETUP I ADVANCED
AdvancedLamp SettingReset
Security Timer
SecurityChange Password
Exit
Input SourceSource LockHigh AltitudeInformation HideKeypad LockTest PatternNone / Grid / White
Background Color IR Function
4:3 / 16:9 / LBX / Native / Auto for XGA series
4:3 / 16:10 / LBX / Native / Auto for WXGA series
Automatic / Phase (VGA) / Frequency (VGA)  /
H. Position (VGA) / V. Position (VGA) / Exit
Brillant ColorColor TempColor SettingColor Spac eSignal
Edge MaskZoomImage ShiftV Keystone3D3D Mode 3D Format3D Sync Invert Exit 
Gamma
ExitFormat
IMAGE I ADVANCED
DISPLAY
DISPLAY I 3D
SETUP I SECURITY
OPTIONS
SETUP
OPTIONS I ADVANCED
OPTIONS I LAMP SETTINGS
User Controls 
English  
						

							24
Image
Display Mode
There are many factory presets optimized for various types of 
images.
4Presentation: Good color and brightness from PC input.
4Bright: Maximum brightness from PC input.
4Movie: For home theater.
4sRGB: Standardised accurate color.
4Blackboard: Best for Blackboard colors.
4User: User’s own settings.
The initial default settings of this mode is from Presentation 
mode. Any further adjustments by the user will be saved in this 
mode for future use.
43D: User adjustable setting for 3D enable.
Brightness
Adjust the brightness of the image.
4Press ◄ to darken image.
4Press ► to lighten the image.
Contrast
The contrast controls the degree of difference between the 
lightest and darkest parts of the picture. Adjusting the contrast 
changes the amount of black and white in the image.
4Press ◄ to decrease the contrast.
4Press ► to increase the contrast.
User Controls 
English   
						

							25
Image
Sharpness
Adjusts the sharpness of the image.
4Press ◄ to decrease the sharpness.
4Press ► to increase the sharpness.
Color
Adjusts a video image from black and white to full color 
saturation.
4Press ◄ to decrease the amount of color in the image.
4Press ► to increase the amount of color in the image.
Tint
Adjusts the color balance of red and green.
4Press ◄ to increase the amount of green in the image.
4Press ► to increase the amount of red in the image.
Advanced
Enter the Advanced menu. Select advanced display options such 
as Gamma, Brilliant Color, Color Temp., Color Setting, Color 
Space, Signal, and Exit. See page 26 for more information.
User Controls 
English  
						

							26
Image | Advanced
Gamma
This allows you to choose a gamma table that has been fine-
tuned to bring out the best image quality for the input.
4Film—for home theater.
4Video—for video or TV source.
4Graphics—for image source.
4Standard—for PC or computer source.
Brilliant Color
This adjustable item utilizes a new color-processing algorithm 
and system level enhancements to enable higher brightness while 
providing true, more vibrant colors in picture. The range is from 
0 to 10. If you prefer a stronger enhanced image, adjust toward 
the maximum setting. For a smoother, more natural image, adjust 
toward the minimum setting.
Color Temp
Adjust the color temperature. Cold temperature, the screen looks 
colder; with Warm temperature, the screen looks warmer.
Color Settings
Enter the Color Settings menu. See page 27 for more details.
Color Space
Select an appropriate color matrix type from AUTO, RGB, YUV.
User Controls 
English   
						

							27
Image | Advanced | Color 
Setting
Colors (Except White)
Press ▲▼ to select a color and press Enter to adjust the hue, 
saturation, and gain settings.
Press ▲▼ to select Hue, Saturation, or Gain and press ◄► to 
adjust the settings.
User Controls 
English  
						

							28
Image | Advanced | Color 
Setting
White
Press ▲▼ to select White and press Enter.
Press ▲▼ to select Red, Green, or Blue and press ◄► to adjust 
the settings.
Reset
Reset all Color Setting values to the factory default.
User Controls 
English   
						

							29
Image | Advanced | Signal
Automatic
Set Automatic to On or Off to lock or unlock the Phase and 
Frequency features.
4 Off—disable auto lock.
4 On—enable auto lock.
Frequency
Change the display data frequency to match the frequency of 
your computer’s graphics card. If you experience a vertical 
flickering bar, use this function to make an adjustment.
Phase
Phase synchronizes the signal timing of the display with the 
graphic card. If you experience an unstable or flickering image, 
use this function to correct it.
H. Position4
Press ◄ to move the image left.
4Press ► to move the image right.
V. Position4
Press ◄ to move the image down.
4Press ► to move the image up.
User Controls 
English  
						

							30
Display
Format
Use this function to choose your desired aspect ratio.
44:3: This format is for 4x3 input sources not enhanced for Wide screen TV.
416:9 (XGA series)/16:10 (WXGA series): This format is for 16x9 input sources, like HDTV and DVD enhanced for Wide screen 
TV.
4Letter Box: This format is for non-16x9, letterbox source and for users who use an external 16x9 lens to display 2.35:1 aspect 
ratio using full resolution.
4Native: Depends on the resolution of the input source – No scaling is performed.
4Auto: Automatically selects the appropriate format.
Input SignalScreen Appearance
or16:9 /16:10 Format16:9 /16:10 Format
16:9 /16:10 Format4:3 Format
Native
LBX format 
User Controls 
English