Optoma Tx765w Projector User Manual

							
2English

 User Controls
Control Panel
 Control Panel & Remote Control
There	are	two	ways	for	you	to	control	the	functions:	
Control	Panel	and	Remote	Control.
Using the Control Panel
 POWER / 
STANDBY
Power LED
Refer to the “Power On/Off the Projector” section on pages 5-6.
Indicate the projector’s status.
 / ? 
ENTER / HELP
Confi rm your item selection.
Help Menu (refer to page 24).
 MENUPress “MENU” to launch the on-screen display 
(OSD) menu. To exit OSD, Press “MENU” again.
RE-SYNCAutomatically synchronize the projector to the input 
source.
SOURCEPress “SOURCE” to select an input signal.
Four Directional 
Select KeysUse     to select items or make adjustments 
to your selection.
KeystoneUse   to adjust image distortion caused 
by tilting the projector. (±6 degrees)
  Lamp LEDIndicate the projector’s lamp status.
   Temp LEDIndicate the projector’s temperature status. 
SOURCERE-SYNC
    ?/
LAMPTEMP
MENU
POWER    STANDBY
ENTER    HELP/
/ 
						

							
22English

User Controls

RE-SYNCSOURCE
KEYSTONEVOLUME
POWERLASER
LEFTRIGHT
UP
DOWN
PAGE+
PAGE-
AV MUTEMENU
DVI-D
S-VIDEO
VGA-1
VIDEOVGA-2
HDMI

?
ZOOM

Remote Control
Using the Remote Control
POWER  
Refer to the “Power On/Off the Projector” 
section on pages 5-6.
LASER  
Aim the remote at the viewing screen, press 
and hold this button to activate the laser 
pointer.
PC/Mouse control
The PC/Mouse control can be used to 
control mouse movement. The mouse 
function is enabled using the USB cable to 
connect your computer and the projector.
L ButtonMouse left click.
R ButtonMouse right click.
PAGE +Use this button to page up.
PAGE -Use this button to page down.
/ ?
Enter/Help 
Confi rm your item selection./
Help Menu (refer to page 24).
SOURCEPress “SOURCE” to select an input signal.
RE-SYNC Automatically synchronizes the projector to 
the input source.
Four Directional 
Select KeysUse     to select items or make 
adjustments to your selection.
KEYSTONE +/-Adjust image distortion caused by tilting the 
projector.
VOLUME +/-Adjust to increase / decrease the volume.
BRIGHTNESS Adjust the brightness of the image. 
						

							
23English

 User Controls

Remote Control
Using the Remote Control
MENU
Press “MENU” to launch the on-screen 
display (OSD) menu. To exit OSD, press 
“MENU” again.
ZOOM 
Zoom in on an image.
Press   buttons to alter zoom.
(This button has a different function on the 
wireless model.) 
DVI-DPress “DVI-D” to choose DVI-D source.
VGA-1Press “VGA-1” to choose source from 
VGA1-IN/SCART connector.
AV MUTEMomentarily turns off/on the audio and 
video.
S-VIDEO Press “S-VIDEO” to choose S-Video source.
VGA-2Press “VGA-2” to choose source from 
VGA2-In connector.
VIDEOPress “VIDEO” to choose Composite video 
source.
Wireless  
Press  to choose wireless source.
(This button has a different function on the 
non-wireless model.)
RE-SYNCSOURCE
KEYSTONEVOLUME
POWERLASER
LEFTRIGHT
UP
DOWN
PAGE+
PAGE-
AV MUTEMENU
DVI-D
S-VIDEO
VGA-1
VIDEOVGA-2
HDMI
?
PAGE-
RE-SYNCSOURCE
KEYSTONEVOLUME
POWERLASER
LEFTRIGHT
UP
DOWN
PAGE+
PAGE-
AV MUTEMENU
DVI-D
S-VIDEO
VGA-1
VIDEOVGA-2
HDMI
?
ZOOM 
						

							
24English

User Controls

UUSSBB
USB cableto USB portto USB port

 Using the USB Remote Mouse Control
The remote control can be used as remote mouse 
control by connecting the projector to the computer via 
USB cable.
SOURCERE-SYNC    ?/LAMPTEMPMENUPOWER    STANDBYENTER    HELP//
    ?/
ENTER    HELP/
Enter / Help 
ENT
 Using the ENTER / HELP button
Press the “ ” button on the control panel or on the 
remote control to open the Help Menu.  
						

							
25English

User Controls

 If no input source is detected and help button is pressed:
 If input source is detected and help button is pressed, the 
following pages will appear to help diagnose any problems. 
						

							
26English

User Controls 
						

							
27English

 User Controls

The	Projector	has	multilingual	On-screen	Display	menus	that	
allow	you	to	make	image	adjustments	and	change	a	variety	of	
settings.	The	projector	will	automatically	detect	the	source.	
How to operate 
.  To open the OSD menu, press “MENU” on the Remote Control or 
Projector Keypad.
2  When OSD is displayed, use   keys to select any item in the 
main menu. While making a selection on a particular page, press 
 or “Enter” key to enter sub menu.
3. Use   keys to select the desired item and adjust the settings 
using   keys.
4.  Select the next item to be adjusted in the sub menu and adjust as 
described above.
5. Press “Enter” to confi rm, and the screen will return to the main 
menu.
6.  To exit, press “MENU” again. The OSD menu will close and the 
projector will automatically save the new settings.
	On-screen	Display	Menus
Main Menu
Sub Menu
Settings 
						

							
28English

User Controls

Menu Tree
**
##
*
###
(WXGA)(XGA)
	(*) Only supported in WXGA model.
	(**) Only supported in XGA model.
	(#) “Display Type” is only supported in WXGA model. 
 	(##) “Signal” is only supported in Analog VGA (RGB) signal.
	(###) “Wireless” is only functional with optional wireless model. 
# 
						

							
29English

 User Controls

IMAGE
  Display Mode
There are many factory presets optimized for various types of 
images.
 Presentation: Good color and brightness from PC input.
 Bright: Maximum brightness from PC input.
 Movie: For home theater.
 sRGB: Standardised accurate color.
 User: User’s settings.
 User2: The initial default settings of this mode is from Movie 
mode. Any further adjustments by the user in User2 will be 
saved in this mode for future use. 
  Brightness
Adjust the brightness of the image.
  Press the  to darken image.
  Press the  to lighten the image.
  Contrast
The contrast controls the degree of difference between the lightest 
and darkest parts of the picture. 
  Press the  to decrease the contrast.
  Press the  to increase the contrast.
  Sharpness
Adjust the sharpness of the image.
  Press the  to decrease the sharpness.
  Press the  to increase the sharpness.  
						

							
30English

User Controls

  Hue
Adjust the color balance of red and green. 
 Press the  to increase the amount of green in the image. 
 Press the  to increase the amount of red in the image.
  Saturation
Adjust a video image from black and white to fully saturated color.
 Press the  to decrease the amount of saturation in the image.
 Press the  to increase the amount of saturation in the image.
  Gain
  Use  or  to adjust Red, Green, Blue, Cyan, Magenta and 
Yellow colors for brightness (Gain).
  Color
Use  these  settings  for  advanced  adjustment  of  the  individual  Red, 
Green, Blue, Cyan, Magenta and Yellow Colors.
  Reset
Choose “Yes” to return the factory default settings for color adjustments.
IMAGE | Color