Home > Optoma > Projector > Optoma Tw675ust 3d Projector User Manual

Optoma Tw675ust 3d Projector User Manual

Here you can view all the pages of manual Optoma Tw675ust 3d Projector User Manual. The Optoma manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 21

21English
User Controls
Remote Control
Using the Remote Control
Power  
Refer to the “Power On/Off the Projector” 
section on pages 15-16.
L ButtonMouse left click.
R ButtonMouse right click.
Page +Use this button to page up.
Page -Use this button to page down.
Enter  / Help Confirm your item selection.
 Help Menu (refer to page 23).
SourcePress “Source” to select an input signal.
Re-SYNC Automatically synchronizes the projector to 
the input source.
Four Directional 
Select KeysUse     to select items...

Page 22

22English
User Controls
Using the Remote Control
AV muteMomentarily turns off/on the audio and 
video.
S-Video Press “S-Video” to choose S-Video source.
VGAPress “VGA” to choose VGA sources.
VideoPress “Video” to choose Composite video 
source.
Interactive Pen
Using the Interactive Pen
 ON/OFF Power On/Off the Interactive Pen.
 LED Indicate the interactive pen’s status.
 LED Indicate the interactive pen’s battery con-
sumption.
Nib  Press the nib to draw or write.
Mouse Left  
Click Mouse left click....

Page 23

23English
User Controls
 Using the HELP button
The HELP function ensures easy setup and operation. 
 Press the “?” button on the remote control or press the 
“HELP” button on the control panel to open the Help Menu.   

Page 24

24English
User Controls
 Help menu button functions only when no input source 
is detected.
 If input source is detected and help button is pressed, the 
following pages will appear to help diagnose any problems.
	Please refer to the 
“Troubleshooting” 
section on pages 
70-75 for more 
details. 

Page 25

25English
User Controls 

Page 26

26English
User Controls
The Projector has multilingual On-screen Display menus that 
allow you to make image adjustments and change a variety of 
settings.
How to operate 
1. To open the OSD menu, press “Menu” on the Remote Control or 
Projector Keypad.
2  When OSD is displayed, use   keys to select any item in the 
main menu. While making a selection on a particular page, press 
 or “Enter” key to enter sub menu.
3. Use   keys to select the desired item and adjust the settings 
using   key.
4. Select...

Page 27

27English
User Controls
Menu Tree
EX665UTi OSD Menu Tree.xls
Main Menu Sub MenuSettings
ImageDisplay Mode
Brightness-50~50
Contrast -50~50
Sharpness 1~15
Color -50~50
Tint -50~50
Advanced Gamma Film / Video / Graphics / PC
BrilliantColor™  0~10
Color Temp. Warm / Medium / Cold
Color Settings
Color Space AUTO / RGB / YUV
Input Source VGA1 / VGA2 / Video / S-Video / HDMI
Image AI On / Off
Exit
DisplayFormat 4:3 / 16:9-I / 16:9-II / Native / AUTO
4:3 / 16:9 or 16:10 / LBX / Native / AUTO
Edge Mask 0~10
Zoom...

Page 28

28English
User Controls
EX665UTi OSD Menu Tree B.xls
Main Menu Sub MenuSettings
SetupProjector ID0~99
Mute On / Off
Volume 0~10
Audio Input
Advanced Logo
Logo Capture
Closed Captioning Off / CC1 / CC2
Exit
Network Network State
DHCP
IP Address
Gateway
DNS
Apply Yes / No
Exit
OptionsSource Lock On / Off
High Altitude On / Off
Information Hide On / Off
Keypad Lock On / Off
Background Color Black / Red / Blue / Green / White
IR Receiver Front Receiver On / Off
Top Receiver On / Off
Advanced Direct Power On...

Page 29

29English
User Controls
	Please note that the on-screen display (OSD) menus vary according to the signal type selected and the projector model you are using.
	(#1) “Color” and “Tint” are only supported in Video mode. 
	(#2) For XGA model only.
	(#3) For WXGA model only. 16:9 or 16:10 depend on “Screen Type” setting.
	(#4) “3D Sync Invert” is only available when 3D is enabled. 
	(#5) “Signal” is only supported in Analog VGA (RGB) signal.
	(#6) MIC volume can also be controlled by “Setup  Volume”...

Page 30

30English
User Controls
IMAGE
 Display Mode
There are many factory presets optimized for various types of  
images.
 Presentation: Good color and brightness from PC input.
 Bright: Maximum brightness from PC input.
 Movie: For home theater.
 sRGB: Standardised accurate color.
 Blackboard: This mode should be selected to achieve optimum 
color settings when projecting onto a blackboard (green).
 Classroom: This mode is recommended for projecting in a 
classroom.
 User: User’s settings.
 3D:...
Start reading Optoma Tw675ust 3d Projector User Manual

Related Manuals for Optoma Tw675ust 3d Projector User Manual

All Optoma manuals