Optoma Tw675ust 3d Projector User Manual

							21English
User Controls
Remote Control
Using the Remote Control
Power  
Refer to the “Power On/Off the Projector” 
section on pages 15-16.
L ButtonMouse left click.
R ButtonMouse right click.
Page +Use this button to page up.
Page -Use this button to page down.
Enter  / Help Confirm your item selection.
 Help Menu (refer to page 23).
SourcePress “Source” to select an input signal.
Re-SYNC Automatically synchronizes the projector to 
the input source.
Four Directional 
Select KeysUse     to select items or make 
adjustments to your selection.
Keystone +/-Adjust image distortion caused by tilting the 
projector.
Volume +/-Adjust to increase / decrease the volume.
Brightness Adjust the brightness of the image.
3DPress the “3D” to turn the 3D OSD menu 
on/off.
Menu
Press “Menu” to launch the on-screen 
display (OSD) menu. To exit OSD, press 
“Menu” again.
HDMIPress “HDMI” to choose HDMI source.
FreezePress “Freeze” to pause the screen image. 
Press this button again to unlock.     
						

							22English
User Controls
Using the Remote Control
AV muteMomentarily turns off/on the audio and 
video.
S-Video Press “S-Video” to choose S-Video source.
VGAPress “VGA” to choose VGA sources.
VideoPress “Video” to choose Composite video 
source.
Interactive Pen
Using the Interactive Pen
 ON/OFF Power On/Off the Interactive Pen.
 LED Indicate the interactive pen’s status.
 LED Indicate the interactive pen’s battery con-
sumption.
Nib  Press the nib to draw or write.
Mouse Left  
Click Mouse left click.
Mouse Right  
Click Mouse right click.
Menu 
Press “Menu” to launch the on-screen 
display (OSD) menu. To exit OSD, press 
“Menu” again.   
						

							23English
User Controls
 Using the HELP button
The HELP function ensures easy setup and operation. 
 Press the “?” button on the remote control or press the 
“HELP” button on the control panel to open the Help Menu.   
						

							24English
User Controls
 Help menu button functions only when no input source 
is detected.
 If input source is detected and help button is pressed, the 
following pages will appear to help diagnose any problems.
	Please refer to the 
“Troubleshooting” 
section on pages 
70-75 for more 
details. 
						

							25English
User Controls 
						

							26English
User Controls
The Projector has multilingual On-screen Display menus that 
allow you to make image adjustments and change a variety of 
settings.
How to operate 
1. To open the OSD menu, press “Menu” on the Remote Control or 
Projector Keypad.
2  When OSD is displayed, use   keys to select any item in the 
main menu. While making a selection on a particular page, press 
 or “Enter” key to enter sub menu.
3. Use   keys to select the desired item and adjust the settings 
using   key.
4. Select the next item to be adjusted in the sub menu and adjust as 
described above.
5. Press “Enter” to confirm, and the screen will return to the main 
menu.
6. To exit, press “MENU” again. The OSD menu will close and the 
projector will automatically save the new settings.
On-screen Display Menus
Main Menu
Sub Menu
Settings        
						

							27English
User Controls
Menu Tree
EX665UTi OSD Menu Tree.xls
Main Menu Sub MenuSettings
ImageDisplay Mode
Brightness-50~50
Contrast -50~50
Sharpness 1~15
Color -50~50
Tint -50~50
Advanced Gamma Film / Video / Graphics / PC
BrilliantColor™  0~10
Color Temp. Warm / Medium / Cold
Color Settings
Color Space AUTO / RGB / YUV
Input Source VGA1 / VGA2 / Video / S-Video / HDMI
Image AI On / Off
Exit
DisplayFormat 4:3 / 16:9-I / 16:9-II / Native / AUTO
4:3 / 16:9 or 16:10 / LBX / Native / AUTO
Edge Mask 0~10
Zoom  -5~25 (80%~200%)
H Image Shift -50~50
V Image Shift -50~50
V Keystone -40~40
3D 3D Off / DLP-Link / IR
3D Sync. Invert On / Off
Exit
SetupLanguage
Screen Type 16:10 / 16:9
Projection
Menu Location
Signal Automatic On / Off
Phase (VGA) 0~31
Frequency (VGA) -5~5
H. Position (VGA) -5~5
V. Position (VGA) -5~5
Exit ³
Security Security On / Off
Security Timer Month / Day / Hour
Change Password ³
Exit Presentation / Bright / Movie / sRGB / 
Blackboard / Classroom / User / 3D
#1
#1
Red Gain / Green Gain / Blue Gain / Red 
Bias / Green Bias / Blue Bias / Cyan / 
Magenta / Yellow / Reset / Exit
#2
#3
#4
English / Deutsch / Français / Italiano / 
Español / Português / Svenska / 
Nederlands / Norsk/ Dansk / Polski / 
Suomi /  Jmkkdbc  / 
0  / Magyar / 
ý eština /  6
						

							28English
User Controls
EX665UTi OSD Menu Tree B.xls
Main Menu Sub MenuSettings
SetupProjector ID0~99
Mute On / Off
Volume 0~10
Audio Input
Advanced Logo
Logo Capture
Closed Captioning Off / CC1 / CC2
Exit
Network Network State
DHCP
IP Address
Gateway
DNS
Apply Yes / No
Exit
OptionsSource Lock On / Off
High Altitude On / Off
Information Hide On / Off
Keypad Lock On / Off
Background Color Black / Red / Blue / Green / White
IR Receiver Front Receiver On / Off
Top Receiver On / Off
Advanced Direct Power On On / Off
Auto Power Off (min.) 0~180
Sleep Timer (min.) 0~995
Power Mode (Standby) Eco. / Active
Exit
Lamp Settings Lamp Hours
Lamp Reminder On / Off
Brightness Mode STD / Bright / Image AI
Lamp Reset Yes / No
Exit
Optional Filter InstalledYes / No
Reset Filter Warning Yes / No
Interactive On / Off
Dual Pen On / Off
Pointer Motion Normal / Draw / Stable
Click Speed Fast / Medium / Low
Set function
Channel Automatic / Channel
Information
Exit
Reset
#6Default / Audio1(Phone jack) / Audio2 
(RCA R/L)
Optoma / Neutral / User
Subnet mask
PointBlank Pointer Motion / PowerPoint Annotation / 
Switch Windows (Alt+Tab) / Esc / Show 
Desktop (Cmd+D) / Open Window Exploer 
(Cmd+E) / Double Click / Disable 
						

							29English
User Controls
	Please note that the on-screen display (OSD) menus vary according to the signal type selected and the projector model you are using.
	(#1) “Color” and “Tint” are only supported in Video mode. 
	(#2) For XGA model only.
	(#3) For WXGA model only. 16:9 or 16:10 depend on “Screen Type” setting.
	(#4) “3D Sync Invert” is only available when 3D is enabled. 
	(#5) “Signal” is only supported in Analog VGA (RGB) signal.
	(#6) MIC volume can also be controlled by “Setup  Volume” in OSD.
	When PoinkBlank is enable, “Display Mode” only support “Presentation” ,“Bright”, “User” and “3D” mode. 
						

							30English
User Controls
IMAGE
 Display Mode
There are many factory presets optimized for various types of  
images.
 Presentation: Good color and brightness from PC input.
 Bright: Maximum brightness from PC input.
 Movie: For home theater.
 sRGB: Standardised accurate color.
 Blackboard: This mode should be selected to achieve optimum 
color settings when projecting onto a blackboard (green).
 Classroom: This mode is recommended for projecting in a 
classroom.
 User: User’s settings.
 3D: Recommand setting for 3D mode enabled. Any further ad-
justments by the user in 3D will be saved in this mode for further 
use.
  Brightness
Adjust the brightness of the image.
  Press the  to darken image.
  Press the  to lighten the image.
 Contrast
The contrast controls the degree of difference between the lightest 
and darkest parts of the picture. 
  Press the  to decrease the contrast.
  Press the  to increase the contrast.