Optoma Projector Zx212st User Manual

							81English
Network Display
Use the Projector Control Panel  screen to remotely modify 
the projector settings, such as Brightness, Keystone, 
Display Mode, Background Color, and others.
See “On-screen Display Menu” on page 24 for more 
information.
ADMIN |   Projector 
Control Panel   
						

							82English
Network Display
Use the Alert Setting  screen to configure the projector to send 
out email alerts when errors occur, such as fan failure, high 
temperature, or light source failure. 
1. Select Enable to enable the email alert feature.
2. In the Email Alert  section, enter the following information:
 ►To: Email address where you want to send the email 
alert.
 ►Cc: Second email address where you want to send the 
email alert.
 ►From: Email address from where the email alert is sent.
 ►Subject: Subject title of the email alerts.
3. In the SMTP Setting  section, enter the following 
information:
 ►Outgoing SMTP Server: The SMTP server of the email 
address from where email alerts are sent.
 ►Username : User name of the SMTP server.
 ►Password: Password of the SMTP server.
4. In the Alert Condition  section, check the type of email 
notification that you want to receive. You may select more 
than one condition.
5. When done, click  Save to save and apply the settings.
ADMIN |  
Alert Setting
	Obtain the SMTP 
information from 
your network 
administrator.
	 Click the Email 
Alert Test button 
to test the email 
alert settings.  
						

							83English
Network Display
Use the Reset to Default screen to restore the network 
settings to its default factory settings. Click Apply to proceed 
with the reset.
ADMIN |  
Reset to Default
Click Crestron RoomView to access Crestron from the Admin 
settings screen (see “Crestron RoomView” on page 84 for 
more information).
ADMIN |  Crestron RoomView
Click Reboot System to logout and reboot the Optoma Web 
Utility page. 
ADMIN |  Reboot System   
						

							84English
Network Display
Crestron RoomView
Crestron RoomView works as a remote control station of your 
projector when connected over a network. Crestron allows 
you to change and re-sync input sources, show the on-screen 
display menu, and adjust the projector settings right on your 
computer.
Using Crestron RoomView
1. Activate Network Display and open the Optoma Web Utility 
page (see “Network Display mode” on page 66).
2. On the left panel menu, click Crestron. The Crestron 
RoomView screen appears.
15
2
7
3
4
6
8
10
9
Using Crestron RoomView
1 Login CodeClick to turn on or turn off Crestron.
2Source ListDisplays the input sources connected to the 
projector.
3Freeze / Contrast / 
Brightness / ColorClick a setting button and drag the slider to adjust 
the setting.  
						

							85English
Network Display
4Menu
Tools
Click to customize the projector settings.
InfoClick to view the projector information.
HelpClick to view help.
5Volume Controls  ►Click “Mute” to mute the audio.
 ►Click “Vol+” or “Vol-” to adjust the volume.
6MenuClick to project the projector main menu.
7Re-SyncClick to re-sync the input sources on the 
projector.
8Arrow Keys and 
Enter
 ►Click the arrow keys to move in the main 
menu, adjust the settings or make selections.
 ►Click “Enter” to confirm a selection.
9
SourceClick to switch the input source.
10 A/V MuteClick to mute the source device audio.
	When IP settings 
are changed, 
multimedia 
modules (including 
USB Display, 
Network Display 
and Flash Drive 
functions) will 
restart, and the 
process will take 
60~90 seconds.   
						

							86English
Network Display
Smart Phone Display
You can project multimedia files, documents and presentations 
from your iPhone or Android phones.
Use MobiShow to play video and audio files, Presentation-to-
Go documents, and play slideshow of photos stored in your 
phone.,
Use WiFiDoc to view project documents such as Word, PDF, 
Excel, and PowerPoint files from your phone.
MobiShow
Download MobiShow in iPhone
1. Turn on WiFi on your phone.
2. Connect your phone to the Internet.
3. Open App Store and search for 
“mobishow”.
4. Follow the instructions to finish the 
installation.
Using MobiShow in iPhone
1. On your projector, activate Network Display mode (see 
“Network Display mode” on page 66).
2. On iPhone, turn on WiFi and connect to the network or 
access point where your projector is connected.
3. Touch  to launch MobiShow. 
MobiShow searches for compatible 
devices.
4. Touch Network Display to connect 
to the projector.
	Alternatively, you 
can download 
MobiShow using 
iTunes. See iTunes 
user manual for 
download and sync 
instructions.
	MobiShow 
supports iOS, 
Android, and 
Blackberry phones.  
						

							87English
Network Display
5. When the Login screen appears, 
type the login code from the 
Network Display screen of your 
projector. Then, click  Login.
6. Touch one of the following tabs:
 ►PtG: To display 
Presentation-to-Go files.
 ►MediaCenter: To play video 
or audio files.
 ►PhotoSender: To dislay 
photo files.
7. Select the file you want to display.
or or
	A tab is disabled 
if no related file 
is stored in your 
phone.
	 To use PtG, convert 
your Powerpoint 
presentations to 
PtG file format 
first (see “PtG2 
Converter” on page 
98).   
						

							88English
Network Display
oror
8. Touch the playback buttons to control or adjust the 
projection options.
	Displayed playback 
control buttons vary 
depending on the 
type of files that you 
want to project.
	 For multimedia 
format compatibility, 
see “Supported 
Multimedia Format” 
on page 107.  
						

							89English
Network Display
1. Turn on WiFi on your phone.
2. Connect your phone to the Internet.
3. Open Market and search for 
“mobishow”.
4. Follow the instructions to finish the 
installation.
Download MobiShow in Android
Using MobiShow in Android
1. On your projector, activate Network Display mode (see 
“Network Display mode” on page 66).
2. On your Android Phone, turn on WiFi and connect to the 
network or access point where your projector is connected.
3. Touch  to launch MobiShow. 
MobiShow searches for compatible 
devices.
4. Touch Network Display to connect 
to the projector.   
						

							90English
Network Display
6. Touch one of the following file buttons:
 ►Media: To play video/audio files.
 ►Photo: To dislay photo files.
 ►PtG: To display Presentation-to-Go 
files
7. Browse for the file that you want to 
display.
	A file button is not 
displayed if no 
related file is stored 
in your phone 
memory.
	 To use PtG, convert 
your Powerpoint 
presentations to 
PtG file format 
first (see “PtG2 
Converter” on page 
98).
5. When the Login screen appears, 
type the login code from the 
Network Display screen of your 
projector. Then, click  Login.