Optoma Projector Zx212st User Manual

							71English
Network Display
How to Project Image?
5
123
8
4
67
Using OPS
1Login CodeDisplays the login code.
2MenuClick to display the application menu.
3MinimizeClick to minimize the application screen.
4CloseClick to close the application.
5
Control Panel
Full Screen
Click to project the image in full screen.
Window 1Click to project the image in the upper left corner 
of the screen.
Window 2Click to project the image in the upper right 
corner of the screen.
Window 3Click to project the image in the lower left corner 
of the screen.
Window 4Click to project the image in the lower right corner 
of the screen.
6StopClick to stop projection.
7PauseClick to pause projection.
8SignalBlinks when projection is in progress.   
						

							72English
Network Display
On using the 4-to-1 split screen projection:
Y
Y Support Windows XP/Vista/7 and MacBook OS 10.5 and above.
Y
Y While using the 4-to-1 split screen projection function, the CPU consump\
tion 
will be higher than the Full screen mode.
Y
Y Does not support audio projection and remote desktop feature on 4-to-1 s\
plit 
screen projection mode.
ResolutionTarget Updated Frame Rate (FPS)
800 * 600 30 FPS
1024 * 768 20~30 FPS 
// depending on SoC’s capability
1280 * 720 20~30 FPS 
// depending on SoC’s capability
1280 * 800 20~30 FPS 
// depending on SoC’s capability  
						

							73English
Network Display
Using the OPS Menu
Click  to display the application 
menu. 
 ►Show Login Code : Click to display the login code of 
the projector on the upper left corner of the screen for 
10 seconds.
 ►Web Admin : Opens Optoma web utility (see "Open 
Optoma Web Utility" on page 67.
 ►Search Server : Click to search and connect to the 
projector.
 ►Projection Quality : Select the projection quality: 
"Normal" for faster projection or "Best" for better quality 
but slower speed.
 ►Projection Source: Select "Main Screen" to project the 
computer desktop or the "Virtual Extended Screen".
 ►Send Audio to Display : Select "Yes" to route the 
audio output to the projetor. The audio driver must be 
installed to use this feature.
 ►Connection Profile : Select "Save current as" to save 
the current connection settings as a profile for later use 
or select "Manage profile" to use or edit an existing 
profile.
 ►Auto WiFi Connect : Check to enable auto WiFi 
discovery and connection to the projector.
	To use the “Virtual 
Extended Screen”, 
download the driver 
first from open the 
Optoma Web Utility 
page. Click your 
computer operating 
system to start the 
download.   
						

							74English
Network Display
 ►Auto Power Manager: Check to allow the projector to 
change your computer power scheme to the "highest 
performance" for better projection quality.
 ►Hide UI: Check to hide the OPS control panel on the 
projected screen.
 ►Advanced Screen Capture: Check to display the 
operating system tip or pop-up windows on the 
projected screen.
 ►Make OPS Token: Click to make an OPS application 
token.  A setup wizard appears, follow the instructions 
on the screen to make the OPS token.
12
3
 ►Copy Application to Desktop : Click to create an OPS 
shortcut icon on your desktop.
 ►About: Click to display the software and network 
information.
 ►Exit: Click to stop the connection and close the 
application.  
						

							75English
Network Display
Using Remote Desktop
When the projector and the computer are connected through 
OPS, plug a standard USB keyboard or USB mouse into the 
USB port of the projector and remotely control the computer.   
						

							76English
Network Display
Web Utility: Conference Control
The Conference Control function allows you to control how you 
want to project images from up to four computers using the 
Optoma Web Utility.
1. Activate Network Display and open the Optoma Web Utility 
page (see “Network Display mode” on page 66).
2. On the left panel menu, click Conference Control. The 
Conference screen appears.
3. Enter the password (default=”admin”).
4. Click Login .
YY	 Supports up to 32 users connected to the system at the same time.
Y
Y To manage the conference, users need to login to the conference control 
page.
Y
Y If there is a proxy server being configured in the Internet setting of the 
client PC, users may not be able to access the web server.  
						

							77English
Network Display
The Conference Control screen appears.
12
3
Using Conference Control
1Computer NameLists the network computers connected through 
the Optoma Presentation Software (OPS).
2
Play Controls
Full Screen
Click to project the image in full screen.
Window 1
Click to project the image in the upper left corner of the screen.
Note: A highlighted button indicates the current 
window position of the projected image.
Window 2Click to project the image in the upper right corner of the screen.
Window 3Click to project the image in the lower left corner of the screen.
Window 4Click to project the image in the lower right corner of the screen.
3StopClick to stop projection.
4IP AddressDisplays the IP address of the connected 
computer.   
						

							78English
Network Display
Web Utility: Admin Settings
Use the Admin function of the Optoma Web Utility to remotely 
view and modify the projector settings. An administrator 
password is required to login.
1. Activate Network Display and open the Optoma Web Utility 
page (see “Network Display mode” on page 66).
2. On the left panel menu, click Admin.
3. Enter the administrator login password (default=”admin”).
4. Click Login. The System Status screen appears.
5. Click a menu on the left panel to display the screen.  
						

							79English
Network Display
The Network Setup screen displays and allows you to change 
the network settings of the projector, such as the  IP Setup, 
DHCP Server Setup , Wireless Setup, and GateKeeper .
When changes are made, click  Apply to save and apply the 
settings.
ADMIN |   Config 
Use the Video Ouput Setup  screen to select the Login Code  
option and configure the  Projector Name.
When changes are made, click  Apply to save and apply the 
settings.
ADMIN |   Video Output 
Setup
	See “SETUP 
| Network” on 
page 42.
	 When IP settings 
are changed, 
multimedia 
modules 
(including USB 
Display, Network 
Display and 
Flash Drive 
functions) will 
restart, and the 
process will take 
60~90 seconds.   
						

							80English
Network Display
Use the Change Passwords screen to change the login 
password for Conference Control and Admin access. Only 
one type of password can be changed at a time.
1. Type the password in Enter New Password. 
2. Re-type the same password in Confirm New Password.
3. Click Apply to save the apply the changes.
4. A “Password has been changed” message appears, click 
OK to close the message.
To change the other type of password, access the  Change 
Passwords screen again and perform the above steps.
ADMIN |   Change 
Passwords