Optoma Projector X600 EH500 User Manual

English
11
Connecting the Projector
Connect to Notebook
E62405SPR
 VGA, DVI, HDMI
6
13
5
24
Installation
1............................................................................................VGA Input Cable
2.................................................................Audio Cable (Optional Accessory)
3..........................................................DVI/HDMI Cable (Optional Accessory)
4.................................................................HDMI Cable (Optional Accessory)...

12
Installation
Connect to Video Sources
Video Output
SVideo Output
DVD player , Settop Bo xHDTV receive rDVD player , Settop Bo x
HD TV receiver
E62405S PR
4
1
2
53
1....................................SCART RGB/S-Video Adapter (Optional Accessory)
2.................................................................HDMI Cable (Optional Accessory)
3....................................................................................................Power Cord...

English
13
Installation
Powering On/Off the Projector
Powering On the Projector
1. Remove the lens cover.
2. Connect the power cord to the projector.
3. Turn On the connected devices.
4. Ensure the Power LED is flashing and then press the power 
button to turn On the projector.
The projector’s startup logo screen displays and connected 
devices are detected. If the connected device is a laptop, press 
the appropriate keys on the computer keyboard to switch the 
display output to the projector. (Check the...

14
Installation
Warning Indicator
▀■ When the Lamp LED indicator lights red, the projector will 
automatically shut itself down. Please contact your local 
reseller or service center. See page 64.
▀■ When the Temp LED is on a steady (not flashing) red, the 
projector will automatically shut itself down. Under normal 
conditions, the projector can be switched on again after it 
has cooled down. If the problem persists, you should contact 
your local dealer or our service center. See page 64.
Powering Off...

English
15
Installation
Adjusting the Projected Image
Adjusting the Projector’s Height
The projector is equipped with elevator feet for adjusting 
the image height.
 To raise the image:
Lift the projectorand press the height-adjuster button. 
The height adjuster drops down. 
 To lower the image:
Press the height-adjuster button and gently push down the 
projector.
1
2
3
NoteNote
 pThe projector table or stand should be level and sturdy. pPosition the projector so that it is perpendicular to the screen....

16
Installation
Diagonallength (inch) size of 4:3 Screen
Screen Size W X H (4:3)Projection distance (D)Offset (A)(m)(feet)(m)(feet)WidthHeightWidthHeightwidetelewidetele(m)(feet)
30”0.610.462.001.501.101.283.604.200.060.19
40”0.810.612.672.001.461.714.805.600.080.25
60”1.220.914.003.002.192.567.208.400.110.37
80”1.631.225.334.002.933.419.6011.200.150.49
100”2.031.526.665.003.664.2712.0014.000.190.62
120”2.441.838.006.004.395.1214.4016.800.230.74
140”2.842.139.337.005.125.9716.8019.590.260.86...

English
17
Installation
Diagonallength (inch) size of 16:9 Screen
Screen Size W X H (16:9)Projection distance (D)Offset (A)(m)(feet)(m)(feet)WidthHeightWidthHeightwidetelewidetele(m)(feet)
30”0.660.372.181.23-1.28-4.180.060.18
40”0.890.502.901.631.401.704.595.580.070.25
60”1.330.754.362.452.102.556.888.360.110.37
80”1.771.005.813.272.803.409.1811.150.150.49
100”2.211.257.264.083.504.2511.4713.940.190.61
120”2.661.498.714.904.205.1013.7716.730.220.74
140”3.101.7410.175.724.95.9516.0619.520.260.86...

18
User Controls
Remote Control
NoteNote
Due to the difference in applications for each 
country, some regions 
may have different 
accessories.
Using the Remote Control
Power On/OffRefer to the “Powering Off the Projector” on page 14.
Refer to the “Powering On the Projector” on page 13.
Test PatternRefer to the “Test Pattern” on page 44.
Mouse Switch
When connecting your PC to the projector through 
USB, press “Mouse Switch” to activate/ inactivate the 
mouse mode and control your PC using the remote....

English
19
User Controls
Using the Remote Control
Volume +/-Press “Volume +/-” to adjust volume.
V Keystone +/-Adjusts image distortion caused by tilting the 
projector. (±30 degrees)
FormatRefer to the “Format” on page 29.
ZoomPress “Zoom” to zoom out images.
Remote IDPress until Power LED is flashing then press 01~99 
to set the particular remote code.
Remote AllPress to set remote code to all.
VGA1Press “VGA1” to choose source from VGA- IN 
connector.
S-VideoPress “S-Video” to choose S-Video source....

20
User Controls
On-screen Display Menus
The Projector has multilingual On-screen Display menus 
that allow you to make image adjustments and change a 
variety of settings. The projector will automatically detect 
the source.
How to operate
1. To open the OSD menu, press “Menu” on the Remote Control or 
Control Panel.
2. When OSD is displayed, use ◄► keys to select any item in the 
main menu. While making a selection on a particular page, press 
▲▼ or “ENTER” key on the Remote Control or “Enter” on the...