Optoma Projector X600 EH500 User Manual

							English
1
Table of contents
Table of contents ....................................................................................1
Usage Notice ..........................................................................................3
Safety Information ........................................................................\
.................3
Precautions........................................................................\
............................4
Eye Safety Warnings ........................................................................\
.............6
Introduction.............................................................................................7
Package Overview........................................................................\
.................7
Product Overview ........................................................................\
..................8
Main Unit .....................................................................................................\
...........8
Connection Ports  ...................................................................................................9
Remote Control ....................................................................................................10
Installation ............................................................................................11
Connecting the Projector ........................................................................\
.....11
Connect to Notebook  ...........................................................................................11
Connect to Video Sources ...................................................................................12
Powering On/Off the Projector .....................................................................13
Powering On the Projector ...................................................................................13
Powering Off the Projector ...................................................................................14
Warning Indicator .................................................................................................14
Adjusting the Projected Image.....................................................................15
Adjusting the Projector’s Height ...........................................................................15
Adjusting Projection Image Size (XGA)  ...............................................................16
Adjusting Projection Image Size (1080p) .............................................................17
User Controls .......................................................................................18
Remote Control ........................................................................\
...................18
On-screen Display Menus ........................................................................\
...20
How to operate .....................................................................................................\
20
Menu Tree  ........................................................................\
...........................21
Image .....................................................................................................\
..............23
Image | Advanced ................................................................................................25
Image | Advanced | Color Matching .....................................................................27
Image | Advanced | Signal  ...................................................................................28
Display  .....................................................................................................\
............29
Display | 3D .....................................................................................................\
.....31
Setup .....................................................................................................\
...............32
Setup | Language  .................................................................................................34
Setup | Security ....................................................................................................35
Setup | Audio Settings .........................................................................................38
Setup | Advanced .................................................................................................39
Setup | Network ...................................................................................................40
Setup | LAN Settings  ............................................................................................41
Setup | Control Settings  .......................................................................................42      
						

							2
Table of contents
Options .....................................................................................................\
............43
Options | Input Source .........................................................................................46
Options | Remote Settings ...................................................................................47
Options | Advanced ..............................................................................................48
Options | Lamp Setting ........................................................................................50
LAN_RJ45 ........................................................................\
...........................52
Appendices...........................................................................................62
Troubleshooting ........................................................................\
...................62
Image .....................................................................................................\
..............62
Other .....................................................................................................\
...............63
Projector LED Status Indicator .............................................................................64
Remote Control ....................................................................................................65
Replacing the Lamp........................................................................\
.............66
Compatibility Modes ........................................................................\
............69
Video Compatibility  ..............................................................................................69
Video Timing Detail Describe ...............................................................................69
Computer Compatibility - VESA standards ..........................................................70
Input Signal for HDMI/DVI-D  ...............................................................................71
True 3D Video Compatibility table .......................................................................72
RS232 Commands and Protocol Function List............................................73
RS232 Pin Assignments (projector side)  .............................................................73
RS232 Protocol Function List ..............................................................................74
Telnet Commands ........................................................................\
...............78
AMX Device Discovery commands .............................................................78
PJLink™ supported commands...................................................................79
Trademarks ........................................................................\
.........................81
Ceiling Mount Installation ........................................................................\
....83
Optoma Global Offices ........................................................................\
........84
Regulation & Safety Notices ........................................................................\
86     
						

							English
3
Usage Notice
Safety Information
The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous \
 voltage” within the product’s enclosure that may be of sufficient  magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance  (servicing) instructions in the literature accompanying the appliance.\
 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Class B emissions limitsThis Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Important Safety Instruction  1. Do not block any ventilation openings. To ensure reliable operation of the projector and to protect from over heating, it is recommended to install the projector in a location that does not block ventilation. As \
an example, do not place the projector on a crowded coffee table, sofa, bed, etc. Do not put the projector in an enclosure such as a book case or a cabinet that restricts air flow.  2. Do not use the projector near water or moisture. To reduce the risk of fire and/or electric shock, do not expose the projector to rain or  moisture.  3. Do not install near heat sources such as radiators, heaters, stoves or any other apparatus such as amplifiers that emits heat.  4. Clean only with dry cloth.  5.  Only use attachments/accessories specified by the manufacturer.   6. Do not use the unit if it has been physically damaged or abused.  Physical damage/abuse would be (but not limited to):▀■ Unit has been dropped.▀■ Power supply cord or plug has been damaged.▀■ Liquid has been spilled on to the projector.▀■ Projector has been exposed to rain or moisture.▀■ Something has fallen in the projector or something is loose inside.Do not attempt to service the unit yourself. Opening or removing covers \
may expose you to dangerous voltages or other hazards. Please call Optoma before you send the unit for repair.  7. Do not let objects or liquids enter the projector. They may touch danger-ous voltage points and short out parts that could result in fire or electric shock.  8. See projector enclosure for safety related markings.  9. The unit should only be repaired by appropriate service personnel.      
						

							4
Usage Notice
Precautions
 
Please follow all warnings, precautions and  
maintenance as recommended in this user’s 
guide.
▀■ Warning-Do not look into the projector's lens when the 
lamp is on. The bright light may hurt your eyes.
▀■ Warning-To reduce the risk of fire or electric shock, do 
not expose this projector to rain or moisture.
▀■ Warning-Please do not open or disassemble the  
projector as this may cause electric shock.
▀■ Warning-When replacing the lamp, please allow the unit 
to cool down. Follow instructions as described 
on page 66.
▀■ Warning-This projector will detect the life of the lamp  
itself. Please be sure to change the lamp when it 
shows warning messages.
▀■ Warning-Reset the "Lamp Reset" function from the  
on-screen display "System|Lamp Setting" menu 
after replacing the lamp module  
(refer to pages 50-51).
▀■ Warning-When switching the projector off, please ensure 
the cooling cycle has been completed before 
disconnecting power. Allow 90 seconds for the 
projector to cool down.
▀■ Warning-Do not use lens cap when projector is in opera-
tion.
▀■ Warning-When the lamp is approaching to the end of its 
life time, the message "Replacement suggested" 
will show on the screen.  
Please contact your local reseller or service cen-
ter to change the lamp as soon as possible.
NoteNote
When the lamp reaches the end of its life, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under "Replacing the Lamp" section on page 66.      
						

							English
5
Usage Notice
  Do:
▀■   Turn off and unplug the power plug from the AC outlet before 
cleaning the product.
▀■   Use a soft dry cloth with mild detergent to clean the display 
housing.
▀■   Disconnect the power plug from AC outlet if the product is not 
being used for a long period of time.
  Do not:
▀■   Block the slots and openings on the unit provided for  
ventilation.
▀■   Use abrasive cleaners, waxes or solvents to clean the unit.
▀■   Use under the following conditions:
  - In extremely hot, cold or humid environments.
    
Ensure that the ambient room temperature is  
within 5 - 40°C
    
Relative Humidity is 10 - 85% (Max.), non-condensing
-   In areas susceptible to excessive dust and dirt.
-   Near any appliance generating a strong magnetic field.
-   In direct sunlight.       
						

							6
Usage Notice
Eye Safety Warnings
 
▀■ Avoid staring/facing directly into the projector beam at all 
times. Keep your back to the beam as much as possible.
▀■ When projector is used in a classroom, adequately supervise 
students when they are asked to point out something on the 
screen.
▀■ In order to minimize the lamp power, use room blinds to  
reduce ambient light levels.     
						

							English
7
Introduction
Package Overview
Unpack and inspect the box contents to ensure all parts 
listed below are in the box. If something is missing, 
please contact Optoma customer service.
Projector with lens capPower Cord 1.8m15 pin D-sub VGA Cable
Remote Control2 x AAA BatteriesCarrying Case
Documentation : 
	User's Manual
	Warranty Card
	Quick Start Guide
	WEEE Card
NoteNote
Due to different applications in each Country, some regions may have different accessories.       
						

							8
Introduction
Product Overview
Main Unit
1
2
3
9
8
7
6
4
11
5
10
1.Tilt-Adjustment Button
2.Tilt-Adjustment Feet
3.Lens Cap
4.LED Indicators
5.Power Button
6.Function Keys
7.Zoom
8.Focus
9.IR Receiver
10.Lens
11.Connection Ports     
						

							English
9
Introduction
Connection Ports
15
12345678911
1213141617
10
182019
1.Power Socket
2.SERVICE
3.VGA Output
4.VGA 1/ YPbPr Connector
5.VGA 2/ YPbPr Connector
6.DisplayPort
7.HDMI 1
8.HDMI 2
9.3D SYNC OUT
10.12V OUT
11.Kensington MicrosaverTM Lock Port
12.Speaker
13.IR Receiver
14.Composite Video
15.AUDIO IN (L and R)
16.S-Video
17.RS232
18.AUDIO IN
19.AUDIO OUT
20.LAN      
						

							10
Introduction
NoteNote
DVI-D function is  model dependent.
 CAUTIONUse of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure. 
Complies with FDA performance standards for laser 
products except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
Remote Control
1.Power On
2.Test Pattern
3.Function 1 (Assignable)
4.Display mode / Mouse 
Left Key
5.Four Directional Select 
Keys
6.Enter
7.Information Panel
8.Source
9.Volume +/-
10.Format (Aspect Ratio)
11.Zoom
12.VGA1/1 (Number Button 
for password input)
13.VGA2/4
14.BNC/7
15.S-Video/2
16.Video/5
17.YPbPr/8
18.Power Off
19.Mouse Switch
20.Function 2 (Assignable)
21.AV Mute / Mouse Right 
Key
22.Laser
23.Re-Sync
24.V Keystone +/-
25.Menu
26.Remote code All
27.HDMI2
28.HDMI1/3
29.3D/0
30.DVI/6
31.DisplayPort/9
32.Remote code 01~99
1
22
23
24
2
3
4
6
7
8
9
10
11
12
13
14
18
19
20
21
25
26
27
28
2915
16
17
30
31
32
5