Optoma Projector RS232 User Manual
Have a look at the manual Optoma Projector RS232 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1077 Optoma manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
51English Appendices Steady light No light LED lighting message MessageON/STANDBY LEDTemp-LEDLamp-LED (Green/Amber)(Red)(Red) Standby State (Input power cord)Amber Power on (Warming)Flashing Green Lamp lightingGreen Power off (Cooling) Flashing Green Error (Over Temp.)Flashing Amber Error (Fan fail)Flashing AmberFlashing Error (Lamp fail)Flashing Amber
52English Appendices On Screen Messages Temperature warning: Fan failed: Lamp warning: Out of display range: If the remote control does not work Check the operating angle of the remote control is within ±20° both horizontally and vertically of one of the IR receivers on the projector. Make sure there are not any obstructions between the remote control and the projector. Move to within 7 m (±0°) of the projector. Make sure the batteries are inserted correctly. Replace batteries if they are exhausted.
53English Appendices Replacing the Lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp. Warning: Lamp compartment may be hot! Allow it to cool down before changing the lamp! Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shat-ter and cause injury if it is dropped. Warning: If ceiling mounted, please use caution when opening the lamp access panel. It is recommended to wear safety glasses if changing the bulb when ceiling mounted. “Caution must be used to prevent any loose parts from fall- ing out of projector.”
54English Appendices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the one screw on the cover. 1 5. Lift up and remove the cover. 2 6. Lift up the lamp handle. 3 7. Press on the both sides then lift up and remove the lamp cord. 4 8. Unscrew the one screw on the lamp module. 5 9. Lift up the lamp handle 6 and remove the lamp module slowly and carefully. 7 To replace the lamp module, reverse the previous steps. 10. Turn on the projector and reset the lamp timer. Lamp Reset: (i) Press “Menu” (ii) Select “OPTIONS” (iii) Select “Lamp Settings” (iv) Select “Lamp Reset” (v) Select “Yes”. The screws on the lamp cover and the lamp cannot be removed. The projector cannot be turned on if the lamp cover has not been placed back on the projector. Do not touch the glass area of the lamp. Hand oil can cause the lamp to shatter. Use a dry cloth to clean the lamp module if it was accidentally touched. 5 1 2 36 7 4
55English Appendices Installing and Cleaning the Dust Filter Dust filters are only required/sup-plied in selected regions with ex-cessive dust. Installing the Dust Filter Procedure: Install two filters.1. Turn on the projector then press “Menu”, go to “OPTIONS -> Op-2. tional Filter Settings -> Optional Filter Installed” and select “Yes”. 1 Cleaning the Dust Filter We recommends cleaning the dust filter every three months; clean it more often if the projector is used in a dusty environment. Procedure: Switch off the power to the projector by pressing the “1. ” button. Disconnect the power cord.2. Remove the dust filter slowly and carefully.3. Clean or replace the dust filter.4. To install the dust filter, reverse the previous steps.5. Reset the dust filter counter after replacing or cleaning the dust 6. filter. Press “Menu”, go to “OPTIONS -> Optional Filter Settings -> Filter Reset” Turn on the projector, then press “Menu”, “OPTIONS -> Optional Filter Settings -> Optional Filter Installed” and select “No” when you pull out the dust filter and would not install it again. 1 2
56English Appendices Computer/Video/HDMI/Mac Compatibility Compatibility Modes For widescreen resolution (WXGA), the compatibility support is depen-dent on Notebook/PC models.Please note that us- ing resolutions other than native 800 x 600 (SVGA model), 1024 x 768 (XGA model), 1280 x 800 (WXGA model) may result in some loss of image clarity.(*1) 1920 x1200 @60Hz only support RB (reduced blank-ing).(*2) 3D timing for True 3D projector.(*3) is not supported HDMI input signal for Mac.(*4) Proscene and Data Projector > 4,000 Lumens only, Native resolution must support.(*5) Window 8 standard timing.120Hz input signals may be dependent on graphics cards support. SignalResolutionRefresh Rate (Hz)VideoAnalogHDMIMac NTSC720 x 48060O--- PAL/SECAM720 x 57650O--- VGA 640 x 48060-OOO 640 x 48067-O-- 640 x 48072.8-O-O 640 x 48085-O-O SVGA 800 x 60056.3-O-- 800 x 60060.3 (*2)-OOO 800 x 60072.2-OOO 800 x 60085.1-OOO 800 x 600120 (*2)-OO- XGA 1024 x 76848-OO 1024 x 76850-O (*4)O (*4) 1024 x 76860 (*2)-OOO 1024 x 76870.1-OOO 1024 x 76875-OOO 1024 x 76885-OOO 1024 x 768120 (*2)-OO- WSVGA1024 x 60060--O- HDTV (720p) 1280 x 72050OOO- 1280 x 72060 (*2)OOOO 1280 x 720120 (*2)-OO- WXGA 1280 x 76860-OOO (*3) 1280 x 76875-OOO 1280 x 76885-OOO (*3) 1280 x 80048-OO (*4) 1280 x 80050-O (*4)O 1280 x 80060-OOO 1366 x 76860 (*5)-OO- SXGA 1280 x 102460-OOO 1280 x 102475-OOO 1280 x 102485-OO- SXGA+1400 x 105060-OO-
57English Appendices 3D Input Video Compatibility Input Resolution HDMI 1.4a 3D Input Input Timing 1280 x 720p @ 50HzTop-and-Bottom 1280 x 720p @ 60HzTop-and-Bottom 1280 x 720p @ 50HzFrame packing 1280 x 720p @ 60HzFrame packing 1920 x 1080i @ 50 HzSide-by-Side (Half) 1920 x 1080i @ 60 HzSide-by-Side (Half) 1920 x 1080p @ 24 HzTop-and-Bottom 1920 x 1080p @ 24 HzFrame packing HDMI 1.3 3D Content 1920 x 1080i @ 50Hz Side-by-Side (Half)While 3D Format is “SBS” 1920 x 1080i @ 60Hz 1280 x 720p @ 50Hz 1280 x 720p @ 60Hz 1920 x 1080i @ 50Hz Top-and-BottomWhile 3D Format is “Top and Bottom” 1920 x 1080i @ 60Hz 1280 x 720p @ 50Hz 1280 x 720p @ 60Hz 480iHQFSWhile 3D Format is “Frame sequential” SignalResolutionRefresh Rate (Hz)VideoAnalogHDMIMac UXGA1600 x120060-OO- HDTV (1080p) 1920 x 108024OOO- 1920 x 108030--O- 1920 x 108050OOO- 1920 x 108060OOOO HDTV (1080i)1920 x 108050O-O- 1920 x 108060O-O- WUXGA (*1)1920 x 120050-O (*4)O (*4)- 1920 x 120060-OOO SDTV (576i)720 x 57650O-O- SDTV (576p)720 x 57650O-O- SDTV (480i)720 x 48060O-O- SDTV (480p)720 x 48060O-O-
58English Appendices RS232 Pin Assignments RS232 Commands and Protocol Function List Pin no.Spec. (from projector side) 1N/A 2RXD 3TXD 4N/A 5GND 6N/A 7N/A 8N/A 9N/A 1 2 3 4 5 6 7 8 9
59English Appendices RS232 Protocol Function List Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control : None UART16550 FIFO: Disable Projector Return (Pass): P Projector Return (Fail): F 1. There is a after all ASCII commands. 2. 0D is the HEX code for in ASCII code. XX=00-99, projector's ID, XX=00 is for all projectors 1 Optoma V1 Command Table. ------------------------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------- Baud Rate : 9600 Note : There is a after all ASCII commands Data Bits: 8 0D is the HEX code for in ASCII code Parity: None Stop Bits: 1 Flow Control : None UART16550 FIFO: Disable Projector Return (Pass): P Projector Return (Fail): F XX=01À99, projectors ID, XX=00 is for all projectors ------------------------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------- SEND to projector ------------------------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------- 232 ASCII Code HEX Code Function Description ------------------------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------- ~XX00 1 7E 30 30 30 30 20 31 0D Power ON ~XX00 0 7E 30 30 30 30 20 30 0D Power OFF (0/2 for backward compatible) ~XX00 1 ~nnnn 7E 30 30 30 30 20 31 20 a 0D Power ON with Password ~nnnn = ~0000 (a=7E 30 30 30 30) ~9999 (a=7E 39 39 39 39) ------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------- ---------------------------------- ~XX01 1 7E 30 30 30 31 20 31 0D Resync ~XX02 1 7E 30 30 30 32 20 31 0D AV Mute On ~XX02 0 7E 30 30 30 32 20 30 0D Off (0/2 for backward compatible) ~XX03 1 7E 30 30 30 33 20 31 0D Mute On ~XX03 0 7E 30 30 30 33 20 30 0D Off (0/2 for backward compatible) ~XX04 1 7E 30 30 30 34 20 31 0D Freeze ~XX04 0 7E 30 30 30 34 20 30 0D Unfreeze (0/2 for backward compatible) ~XX05 1 7E 30 30 30 35 20 31 0D Zoom Plus ~XX06 1 7E 30 30 30 36 20 31 0D Zoom Minus ~XX12 1 7E 30 30 31 32 20 31 0D Direct Source Commands HDMI ~XX12 5 7E 30 30 31 32 20 35 0D VGA1 ~XX12 6 7E 30 30 31 32 20 36 0D VGA 2 ~XX12 8 7E 30 30 31 32 20 38 0D VGA1 Component ~XX12 9 7E 30 30 31 32 20 39 0D S-Video ~XX12 10 7E 30 30 31 32 20 31 30 0D Video ~XX12 13 7E 30 30 31 32 20 31 33 0D VGA 2 Component ------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------- ---------------------------------- ~XX20 1 7E 30 30 32 30 20 31 0D Display Mode Presentation ~XX20 2 7E 30 30 32 30 20 32 0D Bright ~XX20 3 7E 30 30 32 30 20 33 0D Movie ~XX20 4 7E 30 30 32 30 20 34 0D sRGB ~XX20 5 7E 30 30 32 30 20 35 0D User ~XX20 7 7E 30 30 32 30 20 37 0D Blackboard ~XX20 9 7E 30 30 32 30 20 39 0D 3D ------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------- ---------------------------------- ~XX21 n 7E 30 30 32 31 20 a 0D Brightness n = -50 (a=2D 35 30) ~ 50 (a=35 30) ~XX22 n 7E 30 30 32 32 20 a 0D Contrast n = -50 (a=2D 35 30) ~ 50 (a=35 30) ~XX23 n 7E 30 30 32 33 20 a 0D Sharpness n = 1 (a=31) ~ 15 (a=31 35) ------------------------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------- ~XX24 n 7E 30 30 32 34 20 a 0D Color Settings/White Red n = -50 (a=2D 35 30) ~ 50 (a=35 30) ~XX25 n 7E 30 30 32 35 20 a 0D Green n = -50 (a=2D 35 30) ~ 50 (a=35 30) ~XX26 n 7E 30 30 32 36 20 a 0D Blue n = -50 (a=2D 35 30) ~ 50 (a=35 30) ~XX33 1 7E 30 30 33 33 20 31 0D Reset ------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------- ---------------------------------- ~XX34 n 7E 30 30 33 34 20 a 0D BrilliantColor TM n = 1 (a=30) ~ 10 (a=31 30) ~XX35 1 7E 30 30 33 35 20 31 0D Gamma Film ~XX35 2 7E 30 30 33 35 20 32 0D Video ~XX35 3 7E 30 30 33 35 20 33 0D Graphics ~XX35 4 7E 30 30 33 35 20 34 0D Standard ------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------- ---------------------------------- ~XX36 1 7E 30 30 33 36 20 31 0D Color Temp. Warm ~XX36 2 7E 30 30 33 36 20 32 0D Medium ~XX36 3 7E 30 30 33 36 20 33 0D Cold ~XX37 1 7E 30 30 33 37 20 31 0D Color Space Auto ~XX37 2 7E 30 30 33 37 20 32 0D RGB\RGB(0-255) ~XX37 3 7E 30 30 33 37 20 33 0D YUV ~XX37 4 7E 30 30 33 37 20 34 0D RGB(16-235) ~XX73 n 7E 30 30 37 33 20 a 0D Signal Frequency n = -5 (a=2D 35) ~ 5 (a=35) By signal ~XX91 n 7E 30 30 39 31 20 a 0D Automatic n = 0 disable; n = 1 enable ~XX74 n 7E 30 30 37 34 20 a 0D Phase n = 0 (a=30) ~ 31 (a=33 31) By signal ~XX75 n 7E 30 30 37 35 20 a 0D H. Position n = -5 (a=2D 35) ~ 5 (a=35) By timing ~XX76 n 7E 30 30 37 36 20 a 0D V. Position n = -5 (a=2D 35) ~ 5 (a=35) By timing ------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------- ----------------------------------
60English
Appendices
2
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
~XX45 n 7E 30 30 34 34 20 a 0D Color (Saturation) n = -50 (a=2D 35 30) ~ 50 (a=35 30)
~XX44 n 7E 30 30 34 35 20 a 0D Tint n = -50 (a=2D 35 30) ~ 50 (a=35 30)
------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
~XX60 1 7E 30 30 36 30 20 31 0D Format 4:3
~XX60 2 7E 30 30 36 30 20 32 0D 16:9
~XX60 3 7E 30 30 36 30 20 33 0D 16:10(WXGA)
~XX60 6 7E 30 30 36 30 20 36 0D Native
~XX60 7 7E 30 30 36 30 20 37 0D Auto
------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
~XX61 n 7E 30 30 36 31 20 a 0D Edge mask n = 0 (a=30) ~ 10 (a=31 30)
~XX62 n 7E 30 30 36 32 20 a 0D Zoom n = -5 (a=2D 35) ~ 25 (a=32 35)
~XX63 n 7E 30 30 36 33 20 a 0D H Image Shift n = -100 (a=2D 31 30 30) ~ 100 (a=31 30 30)
~XX64 n 7E 30 30 36 34 20 a 0D V Image Shift n = -100 (a=2D 31 30 30) ~ 100 (a=31 30 30)
~XX66 n 7E 30 30 36 36 20 a 0D V Keystone n = -40 (a=2D 34 30) ~ 40 (a=34 30)
~XX230 0 7E 30 30 32 33 30 20 30 0D 3D Mode OFF
~XX230 1 7E 30 30 32 33 30 20 31 0D 3D Mode DLP-Link
~XX400 0 7E 30 30 34 30 30 20 30 0D 3D (2D 3D
~XX400 1 7E 30 30 34 30 30 20 31 0D L
~XX400 2 7E 30 30 34 30 30 20 32 0D R
~XX405 0 7E 30 30 34 30 35 20 30 0D 3D Format Auto
~XX405 1 7E 30 30 34 30 35 20 31 0D SBS
~XX405 2 7E 30 30 34 30 35 20 32 0D Top and Bottom
~XX405 3 7E 30 30 34 30 35 20 33 0D Frame sequential
~XX231 0 7E 30 30 32 33 31 20 30 0D 3D Sync Invert On
~XX231 1 7E 30 30 32 33 31 20 31 0D 3D Sync Invert Off
------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
~XX70 1 7E 30 30 37 30 20 31 0D Language English
~XX70 2 7E 30 30 37 30 20 32 0D German
~XX70 3 7E 30 30 37 30 20 33 0D French
~XX70 4 7E 30 30 37 30 20 34 0D Italian
~XX70 5 7E 30 30 37 30 20 35 0D Spanish
~XX70 6 7E 30 30 37 30 20 36 0D Portuguese
~XX70 7 7E 30 30 37 30 20 37 0D Polish
~XX70 8 7E 30 30 37 30 20 38 0D Dutch
~XX70 9 7E 30 30 37 30 20 39 0D Swedish
~XX70 10 7E 30 30 37 30 20 31 30 0D Norwegian/Danish
~XX70 11 7E 30 30 37 30 20 31 31 0D Finnish
~XX70 12 7E 30 30 37 30 20 31 32 0D Greek
~XX70 13 7E 30 30 37 30 20 31 33 0D Traditional Chinese
~XX70 14 7E 30 30 37 30 20 31 34 0D Simplified Chinese
~XX70 15 7E 30 30 37 30 20 31 35 0D Japanese
~XX70 16 7E 30 30 37 30 20 31 36 0D Korean
~XX70 17 7E 30 30 37 30 20 31 37 0D Russian
~XX70 18 7E 30 30 37 30 20 31 38 0D Hungarian
~XX70 19 7E 30 30 37 30 20 31 39 0D Czechoslovak
~XX70 20 7E 30 30 37 30 20 32 30 0D Arabic
~XX70 21 7E 30 30 37 30 20 32 31 0D Thai
~XX70 22 7E 30 30 37 30 20 32 32 0D Turkish
~XX70 23 7E 30 30 37 30 20 32 33 0D Farsi
~XX70 25 7E 30 30 37 30 20 32 33 0D Vietnamese
~XX70 26 7E 30 30 37 30 20 32 33 0D Indonesian
~XX70 27 7E 30 30 37 30 20 32 33 0D Romanian
------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
~XX71 1 7E 30 30 37 31 20 31 0D Projection Front-Desktop
~XX71 2 7E 30 30 37 31 20 32 0D Rear-Desktop
~XX71 3 7E 30 30 37 31 20 33 0D Front-Ceiling
~XX71 4 7E 30 30 37 31 20 34 0D Rear-Ceiling
------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
~XX72 1 7E 30 30 37 32 20 31 0D Menu Location Top Left
~XX72 2 7E 30 30 37 32 20 32 0D Top Right
~XX72 3 7E 30 30 37 32 20 33 0D Centre
~XX72 4 7E 30 30 37 32 20 34 0D Bottom Left
~XX72 5 7E 30 30 37 32 20 35 0D Bottom Right
------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
(WXGA only)
~XX90 1 7E 30 30 39 31 20 31 0D Screen Type 16:10
~XX90 0 7E 30 30 39 31 20 30 0D 16:9
------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
~XX77 n 7E 30 30 37 37 20 aabbcc 0D Security Security Timer Month/Day/Hour
n = mm/dd/hh mm= 00 (aa=30 30) ~ 12 (aa=31 32)
dd = 00 (bb=30 30) ~ 30 (bb=33 30)
hh= 00 (cc=30 30) ~ 24 (cc=32 34)
~XX78 1 7E 30 30 37 38 20 31 0D Security Settings Enable
~XX78 0 ~nnnn 7E 30 30 37 38 20 32 20 a 0D Disable(0/2 for backward compatible)
~nnnn = ~0000 (a=7E 30 30 30 30) ~9999 (a=7E 39 39 39 39)
------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
~XX79 n 7E 30 30 37 39 20 a 0D Projector ID n = 00 (a=30 30) ~ 99 (a=39 39)
------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
~XX80 1 7E 30 30 38 30 20 31 0D Mute On
~XX80 0 7E 30 30 38 30 20 30 0D Off (0/2 for backward compatible)
~XX310 0 7E 30 33 31 30 20 30 0D Internal Speaker Off
~XX310 1 7E 30 33 31 30 20 31 0D On
~XX81 n 7E 30 30 38 31 20 a 0D Volume (Audio) n = 0 (a=30) ~ 10 (a=31 30)
------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
~XX82 1 7E 30 30 38 32 20 31 0D Logo Default
~XX82 3 7E 30 30 38 32 20 33 0D Neutral
------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------