Optoma Projector Hd91 User Manual
Have a look at the manual Optoma Projector Hd91 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1077 Optoma manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11English Installation 3D S YN C O ut 5 V 5 V P WROut 6 W ( ) ( )3 D S YN C O ut 5 V 5 V P WROut 6 W ( ) ( ) m o l e x MOLEX E62405SP R Connect to Computer/Notebook Connecting the Projector 1 23 1....................................................................................................Power Cord2..................................................................................................*HDMI Cable3...................................................................................................*VGA Cable4....................................................................................................*USB Cable5................................................................................................*RS232 Cable6................................................................................................*12V DC Jack7...........................................................................................*3D Emitter cable Due to the ™difference in applications for each country, some regions may have different accessories.(*) Optional ™accessory 6 54 7 3D Glasses +12V Output
12English Installation 3D S YN C O ut 5 V 5 V P WROut 6 W ( ) ( )3 D S YN C O ut 5 V 5 V P WROut 6 W ( ) ( ) E62405SP R Connect to Video Sources 1....................................................................................................Power Cord2..................................................................................................*HDMI Cable3........................................................................................*VGA/RCA Adaptor4.............................................................................*3 RCA Component Cable5...........................................................................................*VGA/RCA Cable6................................................................................*Composite Video Cable7................................................................................................*12V DC Jack8...........................................................................................*3D Emitter cable Composite Video Output DVD Player, Set-top Box, HDTV receiver 1 24 Due to the ™difference in ap-plications for each country, some regions may have different acces-sories.For more detailed ™information about connecting to the 3D emitter and 3D glasses, please refer to their user’s guides.Use high speed ™HDMI cable to connect Blu-ray 3D player.(*) Optional Ac- ™cessory 3 6 3D Glasses 7 8 DVD Player, Set-top Box, HDTV receiver +12V Output 4 5
13English Installation Connect to 3D Video Devices The 3D video ™source device must be powered on before the 3D projector. If input video is ™normal 2D, please press “3D Format” and switch to “Auto”.If “SBS Mode” is ™active, 2D video content will not display correctly. NOTE NOTEOnce you have connected your devices together with HDMI cables, as shown in the diagram, you are ready to begin. Power ON your 3D video source and your 3D projector. PlayStation® 3 GamesMake sure that you have updated your console to the latest software ver- ysion.Go to the “Settings menu -> Display settings -> Video output -> HDMI”. ySelect “Automatic” and follow the on-screen instructions.Insert your 3D game disc. Alternatively you can download games (and 3D yupdates) via the PlayStation® network.Launch the game. In the in-game menu, select “Play in 3D”. yBlu-ray 3D™ PlayerMake sure that your player can support 3D Blu-ray™ disc and that 3D youtput is enabled.Insert the 3D Blu-ray™ disc into the player, press “Play”. y3D TV (e.g. SKY 3D, DirecTV)Contact your TV service provider to enable any 3D channels on your ychannel package.Once enabled, switch to the 3D channel. yYou should see two images side-by-side. ySwitch to the “SBS Mode” of the 3D projector. The option is located in the y“Display” section of the projector OSD menu.3D Device (e.g. 3D DV/DC) with 2D 1080i side by side signal outputConnect your 3D device and switch to out 3D content with 2D side-by-side youtput to 3D Projector.You should see two images side-by-side. -Switch to the “SBS Mode” of the 3D projector. The option is located in the y“Display” section of the projector OSD menu. If watching 3D content from an HDMI 1.4a source (e.g. 3D Blu-ray) your 3D glasses should always be in sync. If watching 3D content from an HDMI 1.3 source (e.g. 3D broadcast using SBS mode) it may be necessary to use the projector’s 3D Sync-Invert option to optimize your 3D experience. The option is located in the “Display ->3D” section of the projector OSD menu.
14English Installation 3D Broadcast3D Blu-ray™ Disc3D Console Games SKY+HD, cable/satellite box3D Blu-ray™ Player PlayStation® 3 3D Glasses Full 3D 1080p DLP® Projector
15English Installation To turn ON 3D glasses: Press the “Power” button and the LED will flash 1. one time indicating the glasses are ready to use 3D mode.Verify that 3D content is being sent to the projector and signal is compat-2. ible with projector specifications.Turn on the “3D Mode” (DLP-Link/VESA 3D - depending on which type 3. of glasses you are using) of the 3D projector. The option is located in the “Display” section of the projector OSD menu.Turn on 3D glasses and verify image appears in 3D without eyestrain.4. If the image does not appear in 3D, please check 3D device set up cor-5. rectly to send out 3D image or not. Or “SBS Mode” should turn on when input signal is 2D 1080i side-by-side and repeat previous steps 1 ~ 4.It may be necessary to use projector’s “3D Sync-Invert” option to optimize 6. your 3D experience. The option is located in the “Display” section of the projector OSD menu.To turn OFF 3D glasses: Press the “Power” button and hold until the LED 7. switches off.For more detailed information, please refer to the 3D glasses user’s 8. guide, or manufacturer's Website. Using the 3D glasses For more detailed ™information, please refer to 3D glasses user’s guide. NOTE
16English Installation Powering On/Off the Projector Turn on the projec- ™tor first and then select the signal sources. Powering On the Projector 1. Remove the lens cap. 2. Securely connect the power cord and signal cable. When connected, the Power LED will turn red. 3. Turn on the projector by pressing “” button either on the side of the projector or on the remote. The Power LED will now turn blue. The startup screen will display in approximately 10 seconds. The first time you use the projector, you will be asked to select the preferred language. 4. Turn on and connect the source that you want to display on the screen (computer, notebook, video player, etc). The projector will detect the source automatically. If not, push menu button and go to “SETUP”. Make sure that the “Source Lock” has been set to “Off”. ™ If you connect multiple sources at the same time, press the “SOURCE” button on the control panel or the direct source keys on the remote control to switch between inputs. Lens Cap1 Power 2 Menu Mode 16:9 4:3 Letter-Box Native Pure Engine 3D Format LED Brightness HDMI Link 2D/3D
17English Installation Powering Off the Projector 1. Press the “ ” button on the remote control or “ ” button on the side of the projector two times with one second interval to turn off the projector. The following message will be displayed on the screen. Power off? Press power key again Press the “ ” button again to confirm otherwise the message will disappear after 15 seconds. When you press the “ ” button for the second time, the projector will shut down. 2. The cooling fans continue to operate for about 10 seconds for cooling cycle and the Power LED will flash blue. When the Power LED lights solid red, the projector has entered standby mode. If you wish to turn the projector back on, you must wait until the projector has completed the cooling cycle and has entered standby mode. Once in standby mode, simply press “” button to restart the projector. 3. Disconnect the power cord from the electrical outlet and the projector. 4. Do not turn on the projector immediately following a power off procedure.
18English Installation Contact the nearest ™service center if the projector displays these symptoms. See pages 61-62 for more information. Warning Indicator When the warning indicators (see below) come on, the projector will automatically shutdown: ™ “Power” LED indicator flashes red. ™ “TEMP” LED indicator is lit red and if “Power” LED indicator flashes red. This indicates the projector has overheated. Under normal conditions, the projector can be switched back on. ™ “TEMP” LED indicator flashes red and if “Power” LED indicator flashes red. Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicator light up again, please contact your nearest service center for assistance.
19English Installation Adjusting the Projected Image Adjusting the Projector’s Height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustable ring clockwise to raise the projector or counter clockwise to lower it. Repeat with the remaining feet as needed. Tilt-Adjustment Feet Tilt-Adjustment Ring
20English Installation Zoom Ring Adjusting the Projector’s Position To determine where to position the projector, consider the size and shape of your screen, the location of your power outlets, and the dis- tance between the projector and the rest of your equipment. Focus Ring Vertical Lens Shift Lever Horizontal Lens Shift Lever 10%W10%W 60%H 60%H Width(W)Height (H)